General Discussions - 300ZX Related

Silver Z with panel vents, shark front spoiler, and Lukes 3 LED venom rear light clusters. I did wave, but it was a delayed wave, due to the huge hangover. :D :duffer:

Air Conditioning Auto Amplifier? Having done a little investigation myself on my Air-Con display failure, I may have to find the Air-Con Auto Amp, so can anyone tell me where to find it. Yes I have looked in the service manual, but to no avail so far. Thanks in advance. :bow:

Right dont know if this has been done but how about . . . modifying the front light wash to pray directly onto the intercoolers. this way you dont need new pumps, etc I never use the headlight wash so I dont care if thats gone. would it make much difference to speed? would you spray every few seconds when on full throttle?

Any one have a clue where on earth to get big end shells for a 91TT from?? I tried all the motor places around my area and no one has any idea where to get them and needing these pretty asap cheers Dan

hi, everyone, I would like to ask a stupid question, how much am i going to ask if I sell my 300zx? as I am working out my finance (I have to leave the uk after July or Augest due to I have done the degree course), and dunno how much I can get, I have seen the autotrader recently, it seems I can ask for 3500 - 4000, but not sure. the spec of my zed: midnight blue Twin Turbo, Targa Top Auto, 1989 G Reg Japanese Import last December, I am the second owner in the UK service history in the UK (just one) arround 73000 miles Cat 2 Immobliser E/W,E/M,E/S air-con, full windows tinted HKS Super Drager Exhaust JWT Chipped 18" alloys wheel new t…

Was it You? Near the red house at Lilleshal?

hi, couple of things i wanna ask. first of, is there a shop in the uk that sells specific Z things (like those Z nose badges). I have a whole list of US shops but the shipping cost is probably less from the UK to the Netherlands then it is from the US. next one is about those nismo oil/radiater/fuel caps. there are pretty expensive (£53 for an oil cap at prospec), but i see a lot of them floating around on ebay for $5 or so. what´s up with that :confused: ? and do these caps come in different materials? on ebay i saw one that was made of titanium; regulair shops only seem to have aluminium ones. last, does anyone know of a place that still has that Z keyring …

Hi Y'all. Jus wanted a bit of advice. i'm planning on upgrading my S13 to a 300zx. Ultimately, I'd prefer a U.K model but I've noticed i aint really seeing much uk specs for sale.Mainly imports. Now, if i end up going for an import, specifically would i be advised to look out for on this import AND what are some repitable import dealers? ALSO, does anyone have any 0-60 times for manuals in comparison to auto?(and please, dont let this turn into an argument on which one is best. I've seen what you lot are like) :mad:

I've got this red warning light that came on yesterday that looks like a rectangular box with tubes coming out each side and wavey lines coming out of the top. Does any one know what this is? I was close to home so I killed the engine and rolled. My temp guage was fine too...? :confused:

anyone got an oil temp gauge? if so what temp does your car normally run at?

Powerflow systems. Comments please. Ken ;)

I've been offered these wheels at a very reasonable price, there not my first choice for design, but there cheap and that makes a change for a Z mod. I want to know if this is the correct size or near enough for the Z. Excuse the Falken tyre's they'll be burn-out within a corner or two!!! 18" x 9" Rear 18" x 8" Front PCD 114 Offset 12 5 Stud The tyres are all FALKEN ZE-326 Rear tyre is 275 / 35 / ZR18 Front tyre is 245 / 40 / ZR 18 Thanks in advance Rich :)

Anyone heard of these??!!

:confused: took my centre panel off today to remove the jap stereo and replace it with my sony. more cable than john holmes. does anyone know if there is an adaptor to fit jap stereo connectors (car side) to the uk connectors (stereo side). and if there is, will the electric aerial still work? Jase

Sorry if these questions are thick, but it's the way I get a little bit of knowledge. Everything helps. I took a couple of photos under the car when I was investigating my rusting back box, and just out of interest wondered why the bolt in the picture looked wet. I haven't looked any further, just wondered if it was normal, or there is something leaking somewhere, or just water dripping down because of the rain. Everything else looks dry. also the wet looking patch in this photo on the arm, what could that be? Any help much appreciated.

Hi, I am thrilled to bits with my new Zed bar one thing, I have some very nice 18 inch BBS cross spoke alloys similar to the ones Andy Z is selling in this link: http://www.300zx.co.uk/forums/showthread.php?t=30292 The only thing is that one of the centre nuts is missing. I have tried a few places to replace it including BBS UK and have had no joy as they say it is a BBS Japan wheel. Does anyone have any idea where I might be able to get hold of one? I know alot of BMW's have these style of centre caps but have tried one and they are much smaller than the centre nut on mine. Thanks guys, Justin

just done one cant get light to flash have done before without a prob any ideas :confused: steve

Just saw the back of your Zed going up the hill by Sainsburys as I was going in. Anyone here?

My OSF dipped headlamp is not working. Bulb OK, fuse OK, tested Relay - OK, but the earth does not switch "on" when it should do, hence the failure. It's a black and pink cable which disappears from the relay pin "1" with all the other cables down the front of the car. Anyone know where that little cable goes next? To another wiring connector? To the H/L switch directly or somewhere else? Any help appreciated. Cheers. Matt.

:( What should I go for? I asked about this a while ago, so I will do a search and see if I come up with anything. Is there any advantage to single sided, or double? I would like dual exit purely for cosmetic reasons, and not too noisy. Am I weird? I really don't want it to be much noisier than I can. I don't get a kick out of a deafening roar. It doesn't seem to be that different with this hole. I did read about Tiger exhausts in Banzai, and thought they sounded reasonable. Will I get any change out of £500? Also, I don't like the look of that wet stain on the arm. Should I be worried. I havn't actually gone under the car, just taken a few photos.

I had the tyre changed the other week and they jacked it up on the lip... I was going to ask them not to but it was half five and they were kind of doing me a favour as I had come in late. So I knew when it came off the jack it would be scraped... So the unprotected jacks have pulled a bit of paint off the lip- what should I do to touch it in? Do I need to do it fairly quick? Do I need to sand it down and then undercoat it or what? It's obviously on a part that's painted with the anti-stone chip rough paint so it doesn't matter about the finish, and it seems very rubbery and thick where it's come off. What should I do? Is this a different paint, or do I use the …

I want to upgrade my lights to HID. Can anyone tell me what bulb type it is on 1993 300ZX TT R32 eg. H1, H2 etc. Also anyone got any advice ref: manufacturer etc. Thanks.

hello thanks for the wave :dance:

Done all the necessary oil changes and the engine freed up as I drove it! Have now got to a 1000 miles and took it above 3000 rpm, it is very strange because it feels like the engine is still breaking in above 3000 rpm! Its like every time I go out in the car it has another 15bhp added where it has freed up from the rebuild!! Anyway a honda civic type R decided he wanted some at a roundabout the other night, not only did the car outcorner him, it absolutely left him for dust, and it isn't even fully broken in yet :D :D :D

Since I've owned this Z I've never seen the temperature readout on the Air-Con display unit. I assumed that the display was faulty, so got hold of a replacement unit and this one also does not show the readout :confused: So my question is, is there a fault with both these units, or is there an input problem, and where could it be?