General Discussions - 300ZX Related

My picture has disapeared in my signature below but when i go into my user cp it is still on there?........any ideas Cheers Dave :confused:

I am not getting any heat through the demister or through the central vents, I only get heat to the footwell. Any ideas why its not coming through the demister and central vents? I have recently done a major cam belt service and replaced coolant. I'm sure I got heat to come out of the demister before. Cheers.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=10402&item=4540400296&rd=1 he he

Guys anyone got any ideas on how to get the gearbox plug off that just don't wanna come out :nono: it's been heated up, a 2ft extension bar on it and still no budge, the bleedin square plug inside the plug itself is starting to wear away now :headvswal cheers smithy

please help ive got yet another running prob, as always its only when itcold that its worst. it starts ok but when you touch the accelerator the revs drop a bit then when u drive it seems that its missfiring and wont accelerate if u boot it it starts to back fire slightly and miss like hell then when it starts to warm (after about ten mins) it seems to run a bit better but sometimes the revs sit at about 2000 then suddenly drop to normal and if you hold the revs when driving it seems to start missing again power has also dropped slightly please help its doing my head in :headvswal . ive renewed injector which worked for a week and have cleaned some elec connectors which d…

is driving me mad ,i've adjusted the thing so many times but with no successs its ok for a few miles but then it starts again ,anyone got a permanent cure? thanks in advance. :confused: :mad: :(

Giving the zed a good wash today with me new pressure washer and blew the fairlady z sticker clean off the tailgate. Bits were already peeling off so no great loss. Just wondering the best way to remove the glue underneath without damaging the paint? Cheers AL

I had my Profec-B II boost controller installed yesterday by Jonce (thanks again mate!), that's working ok - he did exactly the same on my car as he did on his own. When the controller is switched off, I've found that I'm still boosting to 12+ psi though, anyone have an idea why this might be? Before the controller was put in, my Z was boosting to 9psi (on my Auto Meter gauge) and the only other thing done at the same time as the controller install was me replacing my knackered throttle body pipes (sleeves for TB mounted BOVs, actually) with Smithy ones.

OK it's quiz time - why is this car important?

timewasting at work meant I fell across this thanks to http://www.aus300zx.com big wow factor if you just like pics and blueprints and I am sure very handy if you are a 3d modeller http://www.cgtalk.com/showthread.php?t=171825&highlight=300zx http://www.cgtalk.com/showthread.php?t=156460&highlight=300zx http://blueprints.onnovanbraam.com/blueprints/cars/nissan/

Hi can anybody tell me were or whom i can get a chip to de restrict my 1991 N/A 32 Z its an import so has the 100kph ping, and i believe its top end is restricted im also looking for a replacement air filter kit ie the cone type. Chears folks

My Zed has been laid up for about 7 months and only turned over a couple of times in that period. I need a new batt but what else should I be checking/replacing before she goes back on the road?. She had an oil/filter change 500 miles before being laid up. Thanks in advance!

Hi Zed people, Was it you I saw this afternoon on the trading estate in Llanelli driving a stunning black Zed with aftermarket wheels and BIG zorsts?.....didn't notice the plate. I was stuffing my face in Pizza Hut with the Mrs and Kids when I heard a distinct roar!.....the zed by the way. So, was it you? :)

Well i'm so pissed off waiting for my garage to fit new front brake disks im going to do it myself tomorrow after work. bought them a few weeks back, they're EBS turbo grooved discs wiyh kevlar pads. As i have absolutely no experience in mechanics a good freind of mine who's fairly handy with cars has volunteerd to help. I'd appreciate some do's and dont's from anyone who's changed their discs themselves on the Z. cheers. :smash:

hi have just got my 300zxtt manual its a 1990 a box of bits came with car in the box was two kn filters two turbo xs blow off vavles with fitting kit and some pipes and hard and rubber my question is are blow off valves the same as dumps and where do they fit are they as good as dumps or should i get dumps instead????????

Saw your Z up on the ramps today Baz - looking good mate :cool: Dave

I need to remove my original spoiler to fit f/glass one , but not really sure what i need to do in order to get it off , can anyone help

Me being a lazy fooker can I fit the BOV's with the re-circs still in place as I think I read somewhere someone has done this. Obviously I would need to blank the old ones to make them in-operable just wondered if it was possible. Thanks in advance, Chris :cool:

Can someone tell me what benefit this would be in fitting to the car????

I am returning to the UK from Germany and would like to bring my German spec 1991 TT back with me (even though there are no autobahns to play on! :cry: ). Does anyone know what/how technical mods I have to make (lights, speedo etc) and the registration process? Thanks in advance

My Zed has been laid up over for about 7 months and has only been started several times in this period, due to working on the engine. I have now finished the work and kicked her over and left it running for about 30 minutes. Switched her off and then went to kick it over again but no power at all, not even the faintest show of the warning lights on the dash!. Should the battery have charged a little in this time (the car has not actually moved anywhere!). Cheers

Anyone know the correct plugs for my NA 1992 ? Im running a fair bit of mods - so ideally like colder than stock but stock is a good start Currently using iridium TT plugs (for the last 2000 miles) and it may be me, but im sure they dont feel right

Whos just got the silver zed in Preston then??

Yellow kitted and transfered zed with a big spoiler cruising from blyth towards whitley bay yesterday. Anyone here? David