General Discussions - 300ZX Related

Has anyone removed the trims along the roof and screen on a swb slicktop .Mine have chrome showing through .I want to remove sand and spray these black again this is all one bit and i think will bend easy .New there £70 a side .thanks taff :hyper:

Hi I was in front of you at some traffic lights in a red 306 GTI 6. I heard you giving it a bit of boost? Karl

Hi Anyone on here, looks a nice car, has the new BBS style (standard option) 17" wheels. Mine was identical when it was first imported. Karl

Saw bright yellow zed heading north towards warick on the m40 about 11am ish i was on other side of motorway heading for london.

can someone point me in the right direction, i need some info. i need the fitting sizes for the wheels, ie: spacing from nut to nut, diameter etc, this is so i can match up for my new alloys basically all the info the alloy makers will need.. any links to this anywhere?

:( Help, Ive had a tapping/knocking noise in my engine only heard over about 2500rpm I took it to my local garage and they told me my cars dead>?? Its a UK Auto Z32 TT, on 65k surely it cant be dead. They told me they had a quick look and said it may cost £2500 upwards to repair!??? am i having my pants pulled down here? He told me its had an oil leak somewhere(of which my drive is clean free of oil??) He has put in 3 litres of oil and still got low pressure?? Yet my car still runs ok, and hasnt gone bang...yet? HELP, ive been told there is a good garage near alford that specialises in zeds? anyway to check without having to …

1-alternator 2-injectors originals 3-power stering pump whit bolts 4-all well nuts I am rebilding a tt that came to the uk in 2001 and as BEN STANDING on samone drive way for all this time whit no engine :headvswal

1-alternator 2-injectors originals 3-power stering pump whit bolts 4-all well nuts I am rebildin a tt that came to the uk in 2001 an as BEN STANDING on samone drive way for all this time whit no engine :headvswal

http://cgi.ebay.co.uk/B-NISSAN-300ZX-Z32-ZX32-90-96-LOWERING-COILOVERS-SPRING_W0QQitemZ8003468500QQcategoryZ40192QQrdZ1QQcmdZViewItem

U Had Waved At Me.

1 gunmetal H reg going past tescos on station road, one red one near harrow bus station, you blinked your lights at me!.... are either of u 2 on here? darren

Just noticed that one of my sidelights is out and on further investigation noticed thatthey are blue HIDS. Question is, where can I get them from? I have some others but they are bigger so I guess they are for the main beam? Another question is do you have to take the whole light out to replace the main beam bulbs? It looks a nightmare...how do they come out? Bloody bulbs...

Do I have R12 or R134 Air con fluid My car is an early Series II 1993 see below Is it easy to change from R12 to R134 does anyone know how to continue with R12 (I thought it was illegal) but if I can keep it for now I will...help anyone ????????

I know lots of people get the stuff taken off, but I am having the car repainted and I want it looking 'factory'. Is it easy to get hold of the tape for the lines above the stone-chip paint? Is there a part number for it? I would do a search but I have absolutely no idea what you call the stuff. Dressing tape? or is it just 'the line'. I tried searching for 'removing the line' and got 'sexual positions' coming up!

Many Thanks To Zedworld Who Helped My Car Get Its Life Back Today. It Had Quite A Few Problems And The Guys Sorted Them In No Time At All. All The Best For Future Tradings.

Guys Does anyone know a reputable firm in the midlands that can rebore my bottom end to 3.1/3.2? I can supply the weisco pistons but I dont know what happens about rings? Do you buy them seperate with big end bearings or do you get the 're-boring' company to measure them up and supply them to? Any advice appreciated guys..... Thanks Mark. :D

about 3.20pm today (Tuesday), just near the pub called 'The Swingers' :o :o :confused: :duffer: From the quick glimpse i got i think the Z had a 1994 style rear spoiler, but didnt notice much else. Was it you?? :D

Has anyone heard of or used one of these things. My mate showed me the site. but some of these aftermarket bolt ons can be dodgy. TURBONATOR

Just thinking of changing the gearbox oil in my newly imported Z tt manual swb 1993. which type of oil is recommended for these and would slick 50 for the box be a good idea? Can anyone shed some light on this. Cheers.

Hey guys - next problem!!! I got a 1990 non turbo manual IMPORT with original wheels but i got a problem. Recently discovered they're handed but i dunno if the front and rear wheels are physically a different width, app they are on the uk models but i dunno bout the imports. ANyway my serial numbers are 2x 40P00 L and 2x 40P05 R is this correct, cos they're all over the place. What does it all mean? I'm guessing the L and R stands for left n right but that would make two wheels with the same serial number on the same side of the car. COMPLETE COMFUSION HERE!! Help!! Thanx Rich

can any of you shed some light on this for me, when driving along giving it a bit in third and go for 4th and crunch, now when i've been out in it for a bit and i stop it is realy difficult to get it back into any gear. :confused: thanks ian

I've got a greddy oil plate adapter from Chris but he can't get me a greddy 52mm oil pressure gauge to fit it and apparently other gauges sensors wont fit into it. What are the alternatives? Is the stock sender a cause of inaccuracies on the stock gauge, and if not can you fit something to that or maybe replace the sender. Any help would be appreciated as the job has been half done now for 4mths and I'm P*ssed off trying to sort it. Plus the garage is waiting too. Dave

Hey guys, just wondering how complex it is to change the master sylinder seals on a 30 import non turbo manual? ANy advice - chuck it here cos it looks like a dash off operation to me :( Thanx Rich

What adhesive do people recommend for sticking vinyl trim and where do they get it from and what sort of prices are people paying for it? Furthermore would anyone recommend a different adhesive if I use leather instead of vinyl? Thanks!

Hi just bought vacuum kit (cheers Smithy) unsure which pipes i can change near the battery, could someone PSP arrows or summit onto this pic to identify which ones i can change. cheers in advance