General Discussions - 300ZX Related

just a quick 1, anybody know of an outlet in UK that does clear wing indicator replacements excluding Z Centre (out of stock) THANKS ! :mac1:

Saw you on Lord street around half 3 this afternoon. Anyone?

Saw a red Zed up on ramps in someones front garden near Belstead estate in Ipswich, anyones on here????

Just purchased a grey jap import twin turbo manual 300 and have got a few teething problems and wondered if you guys could help the indicators are flahing very fast and the lights arent working on main beam any ideas also where does the temp guage sit on normal driving as mine seems very low just above the cold mark all the heating seems to be okay though cheers wade

Hi guys, I've searched but cannot find a recent post which specified the Tamiya differential gear part number which is required to fix the headlight adjusters. I must be going blind! How many sets do I need, can anyone tell me where I can get them and approximately how much to expect to pay for them. Many thanks for your time! Dan

Hi, im going to change my ecu chip, ecu is socketed so is it just a case of pulling old one out and pushing new one in using a insertion/extraction clipper or is it more complicated, do i need to use a earth strap? thanx

Were there any changes in the manual gear boxs in the z32 from year to year? just standard ones of course.

Right, getting my gearbox oil changed along with a new prop bearing, main seal and diff oil change. Few things I'm interested to know. Heard the dreaded story about prop shafts needing to be reconditioned....what goes wrong with these and why to they go wrong? I'm not suspecting it is shagged, but need a little insight into things. Car's done low mileage and I have the symptoms for prop bearing, so not suspecting anything else, just wondering though. Anyone changed their dif oil? Any recomendations?

not sure if its of any use if anyone is looking for speakers right now but i went into Maplins the other day....and found some perfectly good in-car speakers on special for £7.99 reduced from £23.99...same size as front door ones...wasn't fussed with the brand as i dont listen to radio or music much when driving...but there you go should do nicely seeing as my stock ones are blown...bargain

Hi Guys, The steering on the zed is a little slack. What do I need to do/replace to make it sharp again? Cheers Marc

ok, I know this sounds like a dodgy question, but I've just bought a set of UK clocks to replace my Jap set, and want to adjust the miles on the new set so its correct for my car when I fit them. What is the best way to do this......perhaps it would be best to PM me the answer.

http://www.amzperformance.com/z32/?page=shop/flypage&product_id=220&category_id=f7862dbdb937d318c2cce0d63c10c6dd& Do they sound cool.... ....or is it me just being a num nut again :rofl: All the highly tunned demo cars have short exhausts eg. Norris Designs Evo. Are these the best of both worlds or have i got them confused for something else?

going past Morrisons in Norwich about 6pm last night?

Ive just got a 99 spec rear panel but im not sure how to wire it up! Its got the converter coming out of it and 2 wires off the converter - how or what do i wire these up 2????? Thanks

Need to get your car washed , fancy doing mine as well? :smw:

http://cgi.ebay.co.uk/300ZX-TT-Race-ECU-Eprom-Chip-Z32-STAGE-3_W0QQitemZ8024042020QQcategoryZ32094QQrdZ1QQcmdZViewItem would you recommend these? what are the pros and cons

I need some new wheel nuts and locking wheel nuts for my car. The only difference is I have on 19inch Wheel Mania Pacifics and the holes are not very wide. Does anyone know where I cant get narrower wheel nuts, or what size I need. Also I want some better locking wheel nuts, again they need to be narrow. Thanks Barry

On the stock shifter for an N/A auto, there seems to be a 'button' at the base of the shifter. It's bright red/orange and is situated in front of the lever itself. Anyone know what this is??

Just wondering how I can get hold of Chris@getgreddy, or if you read this yourself I would appreciate if you got in touch with me. My girlfriend ordered the Apex'i dump valves for my birthday (last friday!) a good couple of weeks ago now, and Ive been told the money has been taken about a week ago, but the dump valves still havnt come through the post?! Ive been emailing and phoning but ive had no replies or any luck gettin through on the phone? Its been so long now I just wondered what was going on? :confused: Please let me know, Cheers, Paul

OK my car is half stripped for 60k service, and then without doin anything it started leaking oil, and on closer inpection it looks like its comin from the back of the engine. Does this mean engine out?? if so is it as big a job as it sounds?? If the engine can be left in, what am i lookin for?? I hear of peeps with the likes of the 200sx sayin they have the engine in and out all the time, easily, but I'm sure its not that easy on these big buggaz, but as all the rad stuff is out of the way, thought now was a good time ;) Please gimme as much info pointers as possible, as I wanna get this sorted while the cars apart, and don't wanna fook it up :( Chee…

I want to buy a momo handbrake kit but cannot or they have stopped doing a universal kit, which is what the search points to. Anyone buy one recently or can advise which one to buy. I have been looking into this or about 3 weeks now and even people who sell them say 'no sorry your car is not listed (nissan) but I know a lad who has one fitted' FFS :D Any help guys??

hi folks. am thinking of buying a zx in the new year and was wondering how much everyone has spent in repairs and maintenance since they've had theirs? I've got enough to buy a nice one and insure it, but need to know how much more i'll need in the bank in case something goes tits up (hopefully it won't as I want the best I can afford.. which isnt loads but just enough) Any help much appreciated!

I took my expansion tank off today to see why I was losing water from my radiator so much, It was full to the top with water way past the min and max marks on it, I think the main reason for this is my radiator cap is the original 92 one, which seems a right pain to take off, so I presume its not releasing the pressure properly. Would this cause the expansion tank to over fill and release water?? I have sorted a cap now. Thanks in advance. ;)

Hey guys, Anyone know where i can get a series 2 ptu very fookin quickly?? Rich

does anyone know if the red dot (next to the gear lever) that indicates what gear is selected is supposed to be lit up at night as it's nigh on impossible to see in the dark.