General Discussions - 300ZX Related

Look at these I know they are Recaros but not the model or part. These would be a good choice for an OEM+ interior. Anyone recognise them?

Hi just painted diff today gloss hamerite black but don't like it might strip it and respary it a Matt silver what have other people done and what paint do I use I take it factory colour is Matt black thanks .

So although my ideal Zed is a SWB TT Manual (pref. Slicktop) I went to look at a LWB NA Auto today. http://www.gumtree.com/p/nissan/nissan-300zx-/1113605959 I thought it looked quite clean and straight in the pics and the description gave the impression it had seen some recent expenditure in all the right areas with regards to maintenance. As it was only a short trip up the M4 I went to take a look with cash in hand. Unfortunately it was so much less than I imagined. Dents in several panels, rust on arches and cills. Massive lip on rusty discs and cheap tyres. Wheels dire, paintwork way beyond correcting. Engine bay disgusting, tears in several interior p…

ok so iv noticed that when im giving it the beans especially in 1st gear at high rpm the throttle seems to stick for a few seconds, iv checked all the mechanical parts like the peddle, cable and linkages . just wanna know if anyone has any experience with this? kinda terrifying while going sideways xD

Does anybody know how to remove the pods? Cannot see any screws?

Hi ! I have a 91 TT auto. Import. I have converted the speedo from KPH to MPH Does this mean the odometer revolves round in MPH since the conversion? Reason of asking is, in the past year I seem to have clocked up 5K miles reading the odometer! This seems a lot of miles as it is not my daily driver. If the odometer is still revolving in KPH then it's 3.5K miles! Suppose I could drive 5 miles in my daily then take the Z on same route to see if odometer reads 8k.

As above required, if you can help drop me a text on 0792915982. cheers sayers

Has anyone carried out the "Air Mix Doors" test in "Active Test" mode of "Auto A/C" Just a thought... Rich

Hi Guys. Looking to change out my front bypass hoses as I suspect a small leak might be from there. Just wondering if its a fairly straight forward job to do? Pull the rad and fan to get proper access and take it from there? Any help gratefully received! Thanks. :)

just working through the cruise system to try and find my fault , my car is a series 2 auto, I have two switches on the break pedal , one white one black, when testing for continuity on the bench they work opposite to each other, one is NO and the other NC Is this correct or should they both be NC when mounted, and the break pedal is in its normal return position. ( so the switch plunger is depressed). anyone got a Scooby ?

Hi, I can't remember how to tell what side is what... can anyone please help !! i haven't noticed any marks on them to indicate... (ps, no i don't have a car to put them on)

My mate has his own windscreen company . I'm looking at getting a new screen in my slicktop he says he can get me bronze / bronze top tint screen on special order needs to be made for £250 plus fitting or a blue screen for £100 plus fitting . So it seems you can get bronze screens but there big money . Think I'll go for blue / blue uk screen .

I've been trying to isolate a chronic boost leak and just can't for the love of god find out what the issue is. Currently I've got the front end of my Z off (and as a result I've now missed my MOT) checking as much of the pipework as possible, everything is tight, all the hoses are fitted correctly and in good condition yet the boost needle sits on 0. I have an additional boost leak somewhere else which I have had for a while that I can't identify either noticed by when off boost, vacuum doesn't drop totally to -14 (sits around -10) Despite rigging it up to a boost leak detector, absolutely NOTHING and it's driving me up the ****ing wall. What else can I possib…

Just incase I need them , does anyone have for sale , a later type ASCD control unit and or the cruise control unit which sits in the engine bay, Let me know Pls cheers Sayers 07929 159828

Tried the search function but to no avail, I can activate the cruise function using the right hand pod and the light on the dash comes on, however when I go to engage the cruise control the second lights flashes , and the cruise control does not activate, Anyone got any experience or know of any diagnostics etc Cheers Sayers

Am I correct in that I saw a post here recently where someone said the high pressure hose can be rebuilt if i take the old one to a hose specialist engineer type place? If so, what specification hose would i require? If not, hey ho....I'll just buy a new one instead Secondly, I've started the Zed up for the first time since Nov/Dec, and heard a loud (ish) tapping from the drivers side of the head/block area until the oil warmed up on idle as i recharged the battery...should I be worried, or is there something else I should be checking during the annual fluids and filters change? Thanks.

I have non turbo decat pipes pictured below, they are advertised by Japspeed as turbo or non turbo, so my question is, when i convert my zed to a TT will these match up to the standard turbo as they are or will i need something else? Coming from a UK TT and will remove the precat too Cheers

As stated in the title - has anybody got one for sale, good working condition..

Guys need urgent help. How do I ground the fuel pump ecu so it runs flat out all the time rather than phased

Hi guys, anyone fitted one of these; It just seems everything is at the wrong angle to undo and I'm starting to think i need to remove the steering collum to do it. Engines out so I thought it would be a quick simple job, sadly not.

My paddle clutch decided to break up on me last night, so I'm in need of a good replacement clutch. Does anyone know any UK based companies that sell a good uprated clutch, probably good for 450bhp. I was going to get the RPS street clutch, but I'm concerned how long delivery from the states will be. Thanks!

Does anyone know if the pistons in the standard Sumitomo calipers are the same size between both front and rear calipers please?

Cant put in classifieds cause not registered user,but these parts are free to good home I have had them lying sround and want them gone or im skipping them. I have a box with numerous items all removed from a 300zx twin turbo 1990 Air con pump Power steering pump and some pipes Both targa tops Two front headlights Both standard intercoolers with some pipes Both standard exhaust manifolds What i believe is cruise control actuator 3 rocker covers and one turbo not sure which side its from I am located in Telford shropshire need gone by weekend as next week they are of to be scrapped Call me Andy 07528577843 for any enquiries please note admin thes…

Been to powerzed today and great to hear the 300 has got a clean bill of health, and would like to thank Jim for his time. Top bloke.

Hi guys just a quick one is a swb and lwb the same petrol flap thanks .