General Discussions - 300ZX Related

righto, i've had this up before but nothing seems to have worked. It started about 50miles after a spin off with no impact damage to anything further forward than the doors(no fuel lines crimped). thought may be completly nonrelated. It just didnt want to accelerate, put-put-putting under power. took it home and tried it a couple of days later and all seemed well untill after about 50 miles it started to do the same, but not as bad as before, could still accelerate but only gently. Went out in it a couple of other times and it was on the whole fine (mabe a single misfire once evry now and again)untill... i was out in it most of the day without many problem…

Just noticed a newish seller selling a few Z bits on Ebay. Only got four items for sale but it's good to see more people selling quality parts on there for a change. Anyone we know? http://stores.ebay.co.uk/Forged-Racing

I know some of you won't actually give a monkeys but i just drove the Z for the first time since january. It was the best feeling you could have without having to cuddle afterwoods:cool::rolleyes:

I have option on some Khan 18's Size / dimmensions: Front : tyres P zero's - 225 x 35 zr 18 87y ET 114.3 / LK35 - 8J X18H Rear : Bridgestones - 265 / 35 ZR 18 ET 114.3 / LK45 9.5J X 18HZ Would they fit my 300zx?

most people on here know me and my car by now unfortunatly on the way back from the supercar sunday show i blew the head gasket now i have the dilema of what to do with it now as it happens i was actually contenplating selling it this year,due to financial circumstances and kids wanting to go to university etc etc.,but i just couldnt bring myself to actually put it up for sale. so option 1 strip it all down, sort the head gasket out and rebuild it (cheapest) option 2 get a replacement engine and swap all the parts and bling over (easiest) option 3 send it to a garage,to sort it out (zed specialist) (dearest) option 4 sell it as it i…

What type do i need for an S1 JDM front?

hi can anyone help me to get in cotact with lahsx or can tell me if he has gone on holiday as i've been tryin to contact him for a week many thanks pete

Had a knock in the car a few weeks ago, hit a barrier head on and damaged the front end. Have replaced the front bumper and headlights and centre panel but now it looks like the accident has pushed the passenger side headlight downwards so now there is a big gap between the bumper and headlight. I wanted to know if you can get a new bit that the headlights mount on, not sure if its all connected to the slam panel or not or even how it joins to the rest of the car (i am hoping that it bolts on). Does anyone know if i can replace this piece or do i have to have the original bit pulled out and lined up?

okay i have a jap auto twin turbo and spec is! 2.5" down pipes decated 3" single exit system apexi filter dta chip underdrive pulley set standard coolers at min blitz boost controller set at about 15 -16 psi i want 400 horse's will this get me there?:hyper: cheers all

dose anyone have a pic of where the knock sensor wire gose to

I have just brought a second hand boost controller which is a greedy profec b spec 2 which has got no instructions and was wondering how the hell you fit it.I think it has all the T pieces i need and have just ordered the pipe work from DTA do i need anything else.Someone please help.

Not seen this before, not sure about the rear valance looks a bit too subtle. Liking the side skirts as well. http://www.pistonheads.com/sales/455654.htm

Hey all, The bodywork on my 300 has seen better days but cant afford to have it respryed. so going to try it myself. anyone have any tips or want to offer their assistance? Thanks, Mat

I spotted a silver zed on the way into town, you won't have seen me though we were in a black audi a8 taxi at the time :D

Is anyone going that has a conzult ?. I have mine but my PC has stopped seeing the car, so I'm assuming the lead has packed up, I'll be sending this back to Danny, but I wouldn't mind running a conzult on it as it's not had one since the rebuild. Would ideally like to rig it up and check it out before I go on the dyno.

Registered users can not advertise stuff for sale... the username on ebay gives it away....

Muhahaha! yes i was in the zed :cool: she was loaded up to the brim with 1 passenger and we cruised at about 70/80mph with the odd playtime session! :bow:

Hey Guys, Can anyone tell me how big the spaire wheel well is? need to know how much room there is. :p

Anyone know what i can stick this down with? Mine keeps on lifting. I did make sure it was all clean etc before i stuck it on.

Does anybody know if works have a uk distributor.Ive been offered a set of 18inch meister 3 piece rims for peanuts,unfortunately one of the rears has been kerbed and could do with a new outer rim.

Simon how did you get on with that enclosure?? Allan

I got my Z back last week - it's the first time ever it has been off the road. Initially it failed its first MOT (during my ownership) back in April on HICAS joints. I got that fixed a month ago but the auto box was playing up so I still felt a bit negative towards the car....... I thought about a manual conversion or buying a 2nd had auto box etc etc, but in the end decided a 2nd hand box (either auto or manual) my fail again in the near future. So one full 'box re-build later and the car is as good as new:hyper: I used the Z all weekend, and, after smoking almost a full tank of Shell's finest in just 185 miles (:nono:) I remember why I love this car. It f…

Hope the link works it was taken at the weekend at prescott hill climb, some one asked a while ago what it sounded like and I have been far to lazy to take any clips myself. Its the 3rd one from the start, but you would be able to tell that from the zaust wouldn't you :wack: http://s148.photobucket.com/albums/s12/TrIcK361/?action=view&current=15062008014.flv

ive just replaced the engine loom and placed the engine back in but cant find the the bit that gose to the knock sensor is there a bit of loom that gose from the sensor to the main engine loom and should the engine loom conneter be black or blue

hi, ive just fitted a turbo timer and everytime i lock the doors (whilst its still running) it re opens itself when the timer cuts out, is there a way to bypass this?. any help would be apreciated cheers. gaz.