General Discussions - 300ZX Related

At 8am this morning heading towards Downend. Silver with headlight brows and enzo rear lights.

Hi Saw you on the Hard shoulder.... I was the Green zed going the other way Hope you are ok and got to where you were going safe and sound and that zed is ok Tony

Hi has anyone got one of these chinnese made front mount intercoolers from ebay fitted .Ive been told they are a copy of the HKS front mount, at £250 they seem a good buy but whats the quality like .They must be better than the stock side mounts for flow i guess .I think ill leave the cheap twin air filter set up of though will my single hks induction still fit above this cooler.thanks taff.:cool:

Hey came and parked along sde you after you had gone into the shops and then was hungry so went and grabbed an Mcflurry and when i came back you were gone :( Was nice 2 see a fellow Zed though :) Mate called me Sad as left my Membership Badge on Dash so youd know who i was :P Munny

Browsing over at czp it appears to me :confused: that they offer the NGK IRIDIUM IX as an upgrade to the highly recommended NGK PRF6B-11B?? The Iridium ix can be purchased here at quite a reasonable price... Fair enough the price difference isnt that big but are there any real smoothness or performance gains to be had with the IRIDIUMs? any experiences or advice on these 2 variants?

Hi, well Z is out at last, but I notice I have a rust worm eating away my car. Specifically the rear wing and what appears to be the bits under the wing. And the sills I think. Are these huge expense?

Found this on net Interesting. Would'nt want to risk those openings on a TT though

What have you guys got planned? Certainly some ideas in the unique mod`s thread. Plans for me: Chipping the 16bit ecu somehow. Fitting a boost controler. Fitting the new wheels when they finally finish being refurbished. Make a replacement boot floor cover that`s light and doesn`t rattle about, along with some little tray things to store stuff under. The big plan that i`m thinking about is fitting a 99spec front, painting the roof bars black followed by a black 99 rear wing. Might have to photochop that soon. Last is to tidy up some of the interior trim. Redo a few bits of the grey Alcantara Edit: Forgot about sorting the tens…

Bar above the windscreen. Does the windscreen have to come out? Or can the rubber trim along the top be pulled back / replaced to hide the new paint edge? cheers jay

Saw you going round roundabout by Wainscott going up towards Hoo, looked very shiney!! PS Nice exhausts ZX_Steve

Hi i purchased a Z31 Afm by mistake, instead of a Z32 Is there much difference from the Z31 afm and the Z32 afms?

God i wish i had some money spare. Red, Slicktop, Volk Rims, No Silly Bodykits etc :cool: Oh and about 800 bhp :hyper::bow: Why am i always skint when cars like this come up :headvswal Mike

One last try, been going through alot of problems with my car over the last few months and starting to lose it with it now. recenltly had the following done. New Cambelt New Wiring loom Injectors cleaned and two replaced loads of gaskets and seals replaced including rear crank seal. PCV Valves with new hoses. Replaced Rad pipes Fitted New Fuel line kit New Radiator on its way as the old one is now losing water! Once this was done I thought the car was riunning great. Took it for a blast to celebrate, obviously a wrong move as when I stopped for a break and re-started it, it started to make a fluttering noise from behind the plenum and now seem…

The above was offered to me yesterday by a Mech friend. Manual in the box indicated the shock is manufactured by a company called Gasmatic Int. based in Basidon Box indicated its made fr 300ZX. does anyone know of this product as I'm tempted to buy it thanks

following the droplets of oil on floor, lookt in the engine bay. there is quite a bit of oil in there, splash over the battery etc. dipstick was out half an inch also. this too much pressure? sounds bad. car smokes a bit on high revs, but asume thats the turbo seals.. views please?

At 5pm heading towards avonmouth on the Severn Bridge Road. Lowered with aftermarket wheels

This is the stuff right? I've leather interior with the mid grey fabric on the door cards, glove box etc. Anyone bought some of this before in the matching colour & where did ya get it? cheers jay

hi can anyone help me my speedo clocks have recently stopped working so i took them out today to check if there was any loose wires and to see if there was a speedo convertor which there is. i then put all the clocks back together took it out for a spin and my power steering wasnt working so i started all over again to check all the plugs and wires were connected all was ok took it out for a spin again worked for about 200 metres and the power steering stoped working again and then when you turn the ignition back off and then back on it works again for another 200 metres can anybody help??

Myself and Dave at Zautos want to thank the members of 300zx.co.uk that have used our services in the past 15 months of our trading. :bow::bow:

Ages ago i remember watching a film whilst on holiday in Canada about a young black fella that borrows his mums 300zx, if i remember correctly it was a good comedy film and think the car was red, but i was only small when i watched this lol, also i think he smashed it up or something like that... does anybody know what im on about...?

Anyone know a good garage in West London that could check my discs??? Just to make sure they are/are not warped? Cheers Alex 07944045178

G***LWP at 2.10pm today parked on main road near to HMP Horfield in Bristol. Anyone???

Anyone know of a garage in West London that could check the run out on my discs??? I live in Ealing. Even wondering if quick fit could do it? Cheers Alex 07944045178

Hi, Im just wondering if anyone has any good recommendations for bodywork garages in the brighton and surrounding areas that would be able to fit replacement, and touch up, body kit parts? Thanks

Pity I'm not there yet! http://cgi.ebay.co.uk/NISSAN-300ZX-CONVERTABLE-LHD-VERY-RARE_W0QQitemZ280236827556QQihZ018QQcategoryZ18238QQssPageNameZWDVWQQrdZ1QQcmdZViewItem :rolleyes: