silverbullet

spot on jimmy, unless you get some solid ally mounts ;)

it's either going to be the turbo oil feed, rocker cover, PCV valve, PCV hose, or one of the two PCV breather out lets in the corner under the idle control valve. there's nothing else in that area which would cause oil splash on the battery. HTH:)

???????????????????? one for FunkySi me thinks :D

have a look at your seat belts, the year will be on there ;)

Davey boy:rofl::rofl::rofl::x: i say no more:cry:

nice one, glad you got it sorted

its what the manual calls the rear traction arms :)

pleased for you bud!!! they are easy to change with no realy worries. just make sure you get the geometry straight after. i found that measuring the stock arms first so you get a rough setting to ease the journey to the mech shop. torque settings.... camber arm 69 - 88 Nm (inner). 77 - 98 Nm (outer) upper link front 77 - 98 Nm (inner and outer) HTH

good to hear you found it bud, hope it all goes well :)

ooh, thats what im after so i can bring the front hubs out

no chance, if the leak is further down then yes, the fuel line and return runs passanger side along side of the hicas lines... if it is the small fuel pipes then its easyer to take the plenum, although you may be able to fix it with plenum on.... if it is'nt the fue lines than it might be the rail its self. i would check the lines first, if no joy then, take the plenum off HTH

sounds to me like its one of your short fuel lines between either the damper and rail or FPR and rail leaking, causing fuel to run down the back of the engine. quite a common place for the fuel lines to go

SPL over powertrix any day. ive got SPL upper and lower on the front with tein traction rods. not a single complaint with them at all. she holds nice and tight with no movement or a single sqeek :D

driftworks do some really good kit with a prooven guarantee

naughty naughty :D

nice one, you wont regret it!!

i highly recomend them, lower arms will fit N/A and TT as they're the same. i phoned them up and asked for a deal for the Z32 with all four arms, came in as £500 delivered :D also... that will be £10 copyright on the pic dude;)

yes...

none of that high class fountain pen crap but, a nice marker from the market!! :rofl: sorry Dave:wack:

:rofl::rofl::rofl: no problem dude

i've had a look and unfortunatly it was too long ago. can you not just fit marker lights or side lights in them instead?

i got a pair off ebay all be a while back but, i had to cut the holes in them to fit the side light bulbs

hope they help...

will take a few for you later ;)

lot less bother with a hover :D