radron

OK guys have bought some 18's 9J all round, any ideas on tyre size that I need to go for? can I run the 9J's with a 235 front and a 255 rear?

hey mate you havent knocked a balance weight off a wheel by accident while you were sanding them down have you?

Thanks Jaffa

Hey all I'm trying to get some new wheels and am looking second hand. I have Ksports 8 pots and 350mm front brakes and the 6 pot 330 mm rears. I have found some second hand rims but need to know if they will fit ok? Ive found some 18's on ebay but wanted some advice: My question is can I run 42 offset fronts and 48 offset rears? Also can I run 9's front and rear? Will a 72mm hub be a problem can I sort this with a spacer? Cheers Ron

Hi there I live in Dorking so a bit further south than you and take mine to SPC in Horsham. They are ok as far as Zed knowledge is concerned I wouldnt call them experts though. They have done a good job on my car so far. Also there is Ztech in Swindon, they are experts and probably about an hour away from you. Cheers Ron

Hi mate there was a set of 350z wheels that went on ebay for 255 but they were only 18 x 8's keep your eyes on ebay youll get some. Also try the OZ chrono they look quite similar or Rota do some similar ones also.

oz superleggera's?

Thanks LG i'll keep looking

hey lg Ive got the 8 pot 350mm fronts and 6 pots 330mm disks at the rear

OK what about 17's would they fit over big brake kits?

Hey guys and girls What is the recomended wheel width on a non wide arch car? Mine has big Ksports calipers and disks so do I definately need 18's or qill 17's do? Cheers

Not sure alos if you could just get a uk ecu? ask the other guys

Hi mate yes mine is the white on. Conzult is a small computer system that will plug into your car under the steering wheel and you can read all the sensor readings and make a number of adjustments.

Hi mate try fusion motorsports in chertsey once SPC have finished my gearbox and clutch I think I'll be taking it to these guys. Give them a buzz and ask them. Ron http://old.fusion-motorsport.co.uk/content/view/23/33/

hey mate has it got a good earth? I had a Kenwood unit and it seemed very sensitive to bad earths. Try an isolater on your phono plugs and on your power.

Hi mate I have a jdm with the 300k clocks and when I put the aem in it the limit was gone. You can fit the converter to the 300k clocks and it will work but you willk only use a quarter of the clock and youll be doing over 100mph. Best thing is grab the 180 clock or a uk clock. Alos I have had my car rebuilt by SPC and they had been excellent but now they have new owners and they have not been very good so far even threatened not to honour any warranty on the work done to my car!!!! be careful with them!!! :xxx: Cheers Ron

hey mate just a thought youve probably already tried it but how about your IACV? when mine died it ran very rich and lumpy

defo IACV mate just unplug it and see what happens

Thanks buddy i'll give them the two fingered salute once my car comes back I think!

Hey mate mines an ex auto. Zed world do the whole conversion for about 1500 I think

P.S have a nismo fpr on the car already new filters as it was only built 3 months ago. New owners! they even told me that I would have to speak to the previous owners to get them to pay for the paint peeling off my cam belt covers as I asked them to re-do them. I told them that I would be happy to do that if they stopped work on my car which is with them for a gearbox swap, new springs and NA clutch assembly swap. As I'll get someone else to paint the covers and do all the work too! They changed their minds quite quickly!

Yep they want me to buy an HKS as they reckon wallbro are average?? I think I'm gonna be looking for a new garage to look after my car once it comes back.

yep I agree go for the roll bars first and see what you think they make a huge difference. Then go for the shocks if its not enough

hey lg i reckon they are just desperate to sell me some new parts

hey guys the garage are convinced that i need to buy a new fuel pump on my car they reckon it wont flow well enough to run 555s and the z1 600 tubs... Everything i read tells me they are wrong whats the deal?