sayers

Alan at Bodymech

Anyone know what size the inlet an outlets need to be , im not sure 25mm is correct?

Anybody know if Re circ valves from any other Vehicle could be fitted ???

Does anybody know how I can conduct a Re Circ valve test to ensure if I buy some ,that they are right and correct ?? before fitting, I dont want to get to the dyno again just to find they are leaking internally, Ta

Hi, My current Recircs are leaking, Im looking for a cost effective solution, (rather than 300 Quid for 2 GFB Mach 2 Rcircs), So if you can help with a known good pair of Recircs, or a known good set of blow off valves, then please let me know ASAP Thanks Sayers 07929 159828

Anybody help with Alternatives ? looked at Ebay and there seem to be a lot of Re circulation Valves with 25 mm ports, Or should I simply fit dump valves, ??

bloody hell, these things are 150 quid EACH,

I wonder where to set them to give the best performance? I do see they are adjustable

Thankyou everybody.

Hi all, I recently had my 300ZX smoke tested, it appears that the Recirc valves themselves are leaking, (not the pipes which they connect to) so, my question is ,can these be reconditioned, if so how ? , and where do I get the necessary parts ?, I do not get the noise described as goose honk, Or are there any companies that will re con the valves and properly test them ? Thoughts Sayers

I belive mine are gapped at 0.7 mm. What you are proposing seems far too close.

Lets not forget, Mike is unhinged, and can drive the car properly.

Greg at Pro Tuner is the only place you should consider. based in Coventry.

I have a cylinder of R12 which you are welcome to, find a friendly Aircon man and job done,

Hi, Require 1 good condition Fuel filler neck to suit a 1993 Nissan 300 ZX TT LWB, If you can help please let me know ASAP, 07929 159828 Ta Sayers

Thankyou Pete

Thanks Richie, I know the picture is of paint, but is it metallic out of the tin or solid ?, Where did you get yours from, and what was the cost ??

Does anybody know if TK3 code is a solid blue with a pearlescent Clear coat, or is it a Metallic Paint with a clear clear coat?? Ta

Will this item work ?? https://www.ebay.co.uk/itm/23100-BU00A-PRIMERA-P12-ALMERA-TINO-ALTERNATOR-NISSAN-LR180-762C/282839430139?hash=item41da8b33fb:g:Wm0AAOSwkvdae2rI

Thankyou Spiff

Thank you. Could you give me the specific primera diesel model and year?

Utterly utterly fed up, just had a load of welding done in the rear arches, went to refit the fuel tank, last bolt tightened up , check all around and drip drip drip, yes the xxxing tank has rusted through under one of the straps, so close to scrapping this thing now, If anyone can help please drop me a text using 07929159828 or email to sayersn@outlook.com Ta

I recently had my car mapped, Those reading may benefit from a few pointers from a chap who spent months getting ready, 1) I had a brand new set of Goodyear Eagle F1 tyres fitted as my old continentals were 7 years old, The car had done 30 miles on said new tyres, before the pass rear blew out on the dyno, So check your tyres, make sure pressures are correct ( as I did) and hope for the best, its quite alarming when a tyre lets go, 2) Boost leaks, I had smoke tested mine, checked everything, and lo and behold, still had some leaks when hooked up to a proper smoke detector. 3) Ensure your cooling system is A1, The OEM rubber coolant pipes may look okay , however mine are old, and were rotten, as was displayed in fine form when the main radiator bottom hose decided to split, A few extra checks as above , may well save some serious pain, and possibly damage on the day. Sayers

I would certainly like to see good pictures of them fitted.

Hi Gaz, yes those could do the job. With the wheel spacers I use I have a 50 mm gap between the side of the rear quarter panel and the outer edge of the Tyre, So im guessing that I need the 50 mm extensions, the only concern I have as what the 50 mm or 60 mm measurement in the advert actually relates to, is it the total width, or is it the slope at the widest point,