JaiKai

I had a fuel leak after changing my plenum and it was down to the clamps on the hoses, overtightening the worm jubilee clips tends to just break them and they don't grip anymore!

seems daft but does it run in each gear, starting off with 1 and so on ! could it be the face plate is off line and your not actually in reverse !

Does it click into reverse or does it just not move in reverse ! Mind you need your foot on the break and push down the button, Poss a fault in the mechanism, see if you can force the gear by using the wee red pin just infront of the gear lever !

Actually dont fit, lol Was told they fitted by the fitter; but then had to trim them after they were glued to the door, hes gonna back fill any gaps underneath to seal it all but if i have any problems i'll likely need another set to do it again ! Why is it people just dont listen as i did tell him they would have to be trimmed !

bets theres a dirt track next to it for off roaders !

you mean no through road ! one way in and one way out !

Get a courier to pick it up !

That's called Irvine talk !!

Was gonna ask the same thing, although I know mine ! Would be good to know where to look!

That's what I'm hoping will happen, just shaving it down so that it doesn't rub and scrape the paint on the door sils

So far, although he never cut down the door fillers before fitting, so had to trim afterwards and doors are a little stiff when shutting, just needs adjusted a bit still !

Guy called archie, has a workshop at hillhouse farm; just outside prestwick

Just posted up a few more !

Some more pics from today's fittings !

Tough to be honest! The shape stretches a bit after screwing in the bolts so we used a block of wood glued inside the wing to push the middle out a bit so that it's profile matches the door, else it would be about 10mm to far in! But it looking good and nearly there, hopefully have her home on Thursday !

Lol, Already thought of that !

Congrats mate, I'm in the body shop right now fitting my other wing and left side skirt! Should be all done for Friday when I get my meisters fitted !

Code 55 Buddy !! means yeh, thats correct !

We test fitted them and it looks ok without being trimmed ! What part needs trimmed and why ? On a test fit the door closes perfectly and the fillers dont rub anywhere.

Fitted the drivers side wing yesterday too and had a wee issue of the middle vent near the door pulling in to much and it caused the profile of the wing to be shallower than the actual door; simple fix was to glue a bluck of wood to the interior of the the wing which pushed it out a bit and also it reinforced it making it more sturdy. Lastly we have the new nose panel which i meshed up on saturday

More pics time ! Cars still in the workshop, delays again due to faulty lighting ! The zed was worked on for long as possable in the dark and even at one point we used the headlights of another car to light up the garage. The tailgates nearly done and the 99 spec spoiler will be test fitted tomorrow as soon as everything drys properly. Getting there ! I say - we are looking smooth !

take it shes not starting ?

1. JaiKai 2. Berrica [confirm y/n] 3. Shrek 4. Zhoodyx 5. Zerocooldel 6. PerpetualZero 7. Ossian [confirm y/n]