Medallion Man

***** SOLD ********* I bought both these new about three years a go, they have been on the car and have a few scratches (some touched up) but NO cracks or broken bits. The come with all rubbers (but no plastic screws/clips) £50 delivered

common issue ... someone will be along soon to explain the reason, how to get in and fix...

Bought but never fitted, in very good condition. The shocks look good, checked for leaks and all seems well.. if you really want I can disassemble and check the shocks but that may increase price. Guess I’m looking for £100 plus postage ( myhermes, so shouldn’t be more that a tenner) See description on US website, these will give you about an inch lower at the front. TANABE (USA) SUSTEC FG210 lowering springs. http://www.tanabe-usa.com/gf210.asp?id=3 number on springs is 0507 Z32RG

if you loosen or take out the middle light section (much easier since there's no goo) it will make putting the lights back in much easier .. :)

I'm certainly no expert on that but it does sound like as good plan. you might need a puller tool to get it off... I uses some bolts and a small chunk of wood and made my own puller..

you might just be able to push it back in... but I 'd be wondering why / how it came out in the first place. best of luck..

bugger, I can't find it... but not hard.... two bolts at front and back of door near the sill that control the angle the window is at... there is a locking nut on them and you them, have to adjust them to get the window the tilt in a bit more towards the car. they will need to the adjusted in opposite directions... (you'll see when you do it) I can't remember what I had to remove to get to them (might have to be the door card) but I don't thing it was too difficult... it's also worth checking this.. (to make sure its not damaged) http://www.pexcom.com/images/Rattling-Window.pdf

yeap, I'm sure there's a write up somewhere... I'll see if I can find it... race you.. !! :D

Both left and right side - £20, pair - delivered *** SOLD***

Ignition barrel, both door locks and tail gate lock. (no glove box lock). All oiled and working fine... ( included - the two shear-bolts & barrel light). £75 delivered ono

***** SOLD ********** Lights are in good condition, only a very few blemishes and crazing…… £95 posted. ono The units have been pulled apart and the lenses removed. New lenses made and installed, LED light strips installed for both break light and indicators. The inside has been re-sprayed silver. 99 spec striped added to lenses. Units reassembled. LED bulbs used in all break and indicator bulb holders (they’re about £45 on their own) Removal and installation guide included. Butyl rubber seal made good.

Front indicators, clear conversion (de-tangoed) and mod for larger SMIC fitment, £40 posted. (with sidelight fitment as well) The units have been pulled apart and the amber lenses removed. The bulb holder has been cut off, a new hole has been made on the other side of the unit, the section cut out has been heat welded over the old bulb location and the bulb holder has been heat welded in the new location. The inside has been re-sprayed silver.

£55 delivered (registered)

Two new rubber seals £12 delivered 1st class signed for) If anyone wants the 4 others that are second hand - £2 posted

******** SOLD *********** Three front fog light side lenses, two blanks and one with the adjuster hole. £20 delivered (1st class signed for) ono

£20 delivered (1st class signed for)

Hard to say who is responsible other than the driver.... B&Q and the land/site owner both deny any knowledge or giving permissions, the police have monitored these meets for a long time and due to no previous incidents have allowed them to continue. I can see a chance in this attitude from now on. like with everything it only takes one "Idiot" to spoil it for everyone... .. and no I don't go to them either.. :)

Great condition, no broken bits, cracks or scratches and all clips intact. £55 posted (1st class recorded)

*** SOLD********* Centre radio surround console & covers with clock Surround is in very good condition (a few small scratches) NO CRACKS, comes with the top and middle (with clips) covers in excellent condition (NEW), vents (all good) as well as a working clock. - £65 posted (1st class recorded) I have also added a cover panel to the bottom opening (with two small holes for alarm lights) I can also supply a cubbyhole for it (for a couple of extra quid) the cubbyhole has a hole made in the back for where the previous owner had the EBC control though. (bit of black tape should cover it).

All the backlighting bulbs (circled in red) have been changed to LED (including the ones at the bottom of the unit.) £65 delivered

is this any good... http://www.300zx.co.uk/forums/showthread.php?164654-Fuse-box-translation&highlight=fuse

not sure how much you have to spend on fixing this... but if you're going to be looking for another motor keep my car in mind... we could come to some agreement.

Front indicators, clear conversion (de-tangoed) and mod for larger SMIC fitments, £30 posted. (single bulb fitment) The units have been pulled apart and the amber lenses removed. The bulb holder has been cut off, a new hole has been made on the other side of the unit, the section cut out has been heat welded over the old bulb location and the bulb holder has been heat welded in the new location. The inside has been re-sprayed silver. Units have been cleaned and re-sealed.

I spotted an two tone (black top red bottom) de-spoilered nice and clean looking Zed... sounded very nice too.

Set of fuses and relays (from Zedworld) £13 posted