groover

£1500 in July 07, i dont bother adding up what ive spent on it since or in the future. Dont do it to see what it might be worth in the future, just for the love of it.......ish

Happy birthday Ian, have a nice day

The pipes to the matrix hold water, so not a good idea to remove, unless you are going to flush the rad/water system. They are a pig to get to, but heat usually helps, you can either run the engine for a bit to get hot, which will help the metal expand and make removal a little easier. Or spray some wd40 or similar around the top of the sensor to try and soak the thread. There is a spray, cant think of the name, ........ease that might help. Try searching threads, im sure this has come up before. HTH

Pielli Pzero's all round, rear ones need replacing soon and Falken seem to be cheaper option

You want the yello/green wire from the loom to the convertor, leaving the other end in the plug. So you need to snip the wire an inch or two from the plug, put a crimp on it so it can be reconnected at a later stage should it need too. and use a bullit connector from the wire (loom end) and connect to the convertor signal.....simples.....

Alot of Tesco stores have it now, isle of wight store getting it soon, mind you the sign " super unleaded coming soon" has been up for 3 months lol

Thanks Trish, long time no hear, must be a long holiday lol

Happy birthday Steve, have a good day Graham

lol old pic, still got them im afraid, soon to be 2 aside instead of 3. I know exactly where you are coming from tho. but they look great at night, not convinced during the day tho.

Antalya is beautiful, went there a few years ago, great weather, nice people and lots to do. You should have a great time Graham

Ill swap, i have the japspeed from 2fast2cool

Had a nice day, cheers, back to normality now tho lol

Happy birthday matt, long time no hear lol

Happy birthday matey

How very dare you:xxx: Thanks guys, im enjoying a nice peaceful day with no ankle biters about, then going out for a meal and a few :duffer::duffer: See ya later Graham

http://www.300zx.co.uk/forums/showthread.php?t=66739 10amp 2nd in from the left top row

have the window in the open position to remove the screw which goes through each stopper, you might need to adjust the window height slightly to get to the screws properly, so have your window switch to hand. Lift the glass upwards. You may need to jiggle the angle a bit to get it out, but fairly straight forward. There are the 2 stoppers on the window in the door and a third at the top of the door. HTH Graham

Have a good day bud, all the best :duffer::duffer:

Happy birthday matey :duffer::duffer: Mine next week :dance:

IIRC there are modifications to made for the air con unit to accept the new gas Do a search on aircon regas, there are plenty of threads about the subject Cheers Graham

Great post you guys, im sticking them in the faq section, if you dont mind

Ive had 3 SD1's in my time and loved them, look forward to seeing the progress.

True but rechipping will get rid of the rev limiter too

What happens now? :D Carry on as usual :tongue:

John Dixon http://www.300zx.co.uk/forums/member.php?u=239 Just pm him