groover

Let me know if it will suit your needs

Hi Mark Yes you can change the fuel gauge, its lit up from behind and to the side, so no problem. I have a spare if you want me to change it for you Cheers Graham

TT calipers will fit your N/A straight fit, price anything from £50-£100 depending on condition Seal kit DTA or MJP

No Not in the hole, just back from the hole, run your finger over the rubber at the point the targa would meet the top of the A pillar. It tends to flatten out and needs to be raised to create a seal with the targa rubber. I say a matchstick, anything that you can put under the lip of the rubber to raise it. Another idea is to use a straw under the lip, a bit of glue or heat to keep it from moving Or inject some silicon rubber into the rubber tube to expand it slightly and create a better seal I will try and dig out some pics

One finished, one to go

Hi Mark, you would need to be subscribed to pm, but stick a post up and let me know. No prep required really as you will need most of it intact to drive down.

Hi Mark Im up for that, will take a quite few hours though, could get a chinese delivered for tea ;)

LMAO how the fook would i know that:rofl: Seriously though Trish, you wouldnt have any trouble pulling, get yourself over there and have well deserved break or........................................................................something:x:

No Probs If you mean the red in the rev dial, believe me ive tried several ways of getting that little sucker to light up red, but the dial face has a blueish coating and it doesnt look that great. If you stick a led directly on the dial face, you see the spot of the led, so it needs to be off the face slightly. The only trouble then is that not enough red comes through to give the required effect

Yes Dave, i find that just replacing the 4 bulbs with 5way leds doesnt give an even enough finish, couple of dark spots around the top of the speedo and rev dials. So i use some led strips, virtually underneath each of the 2 offending clocks, add a bit of reflective tape here and there and job done. Heres a pic of mine in blue. I added acouple of red leds at the temp Hot symbol and the fuel empty, just to see how it turned out. Bit more fiddly highlighting certain symbols, but a overall a more even effect with the blue coverage

heres a couple of pics of the dash, it is purple lol the camera sees it as blue, not very good quality,

Have you just replaced the rubbers on the targa or the long rubber that goes from one side right down the door? At the point the targa rubber hits the rubber in the roof section, there is a little lip, that tends to get flattened, stick a match stick or similar under that section, should make a better seal

My mum goes every year with the girls, seems to have a great time, met a guy out there. It looks like fun, but i cant stand drunken lager louts making a shed load of noise. Maybe im getting old lol

Well done mate, get something organised soon, would be nice to have a south meet before crimbo. All the best Graham

If that was just the case, we could let it go, unfortunately at the bottom of the facebook link under the pics, there was an indication of a charge for anyone wanting the pics.

Reigistered users are not permitted to offer for sale, link to a site to offer the same. If you have free pics to offer a member who may have been at an event, then please state as such, if not, im afraid you cannot create a thread offering to sell pics. You have been warned already regarding this.

An n/a for instance, has a plate/disc with 3 grooves, TT will have a multiplug fitment HTH HTH= hope this helps;)

Straight swap, couple of little screws on the back/bottom of the wheel to get the front cover off, multiplug for the cruise control, then a 19mm nut IRC Do make sure that its from a TT for the hicas

No Probs, hope you get it sorted. How did you find it so far? im going to remove mine soon, but not looking forward to it lol

You wont need to take the dash out, you just need to be a 2 foot midget and get on your back upside down with 3 foot arms:rofl: Best give JeffTT a quick call tommorrow, they do loads of conversions and im sure he can give you some tips. Going to be doing this myself soon, so if you get it sorted, let us now :D Cheers Graham

This may help http://www.pexcom.com.au/z32cms/e107_plugins/content/content.php?cat.168 And another one http://www.twinturbo.net/nissan/300zx/tech/plenum/plenum.aspx

The auto ecu is still trying to get a signal no doubt, yep take the bulb out, wont affect anything

With the amount of electrical connectors under there, its not a good idea to pressure wash. There have been threads in the past regarding this issue, if you do a search

Gone;)

My apologies Rich, you do have a valid point, i will get turboz to change the heading in the opening page. In the meantime ive put a sticky in the newbies section relating to the faq section Cheers Graham