General Discussions - 300ZX Related

hello every1 done air leak check and had a couple which i sorted now it leaks a little from dippstick is this normal thankyou

virtual pint for the winner, but jeff and isaac cant compete lol i think it is a rear diffuser and a sex change for isaac l(he wants to be a man so is having the op) what do you's think ?????

put a post up few days back fitted profec the problem is it aint changing boost [much] around 11 to 12 psi on whatever setting its on fitted 1 to mine and 1 on cousins z hes works fine i used fuel line on mine, and vacum hose on hes, so have now changed mine to same hose, tryed hes controller and bit of controller under bonnet, so aint controller, tested for air leaks had couple sorted them [only place it leaks now is from dip stick [oil] [is that normal] i have stage2 turbo technic turbos [hes are standard] could my actuators be differant i know i keep asking but running out of ideas [lol] anyone else got any ideas its all piped up the same as hes…

Well once again the arguments continue... this time with more action and more knowledge of how the movie programme works lol... enjoy :hyper: [YOUTUBE] [/YOUTUBE]

Hi A question for all you auto electricians out there, I have got a Boost gauge with a boost nipple out the back and 3 wires Black, Red, White, Instructions say connect Black to earth, Red to ACC (ignition accessory feed) and the White to the pos (+) of the battery. When i wired it up i only had ground and Acc feeds so i wired up the red and white together My one complaint to the supplier was that although i could now see the outer gauge numbers, i could not see the needle. they then sent me the instructions and said "have you wired it up correctly" obviously i hadn't so i spent today re-wiring it, However still no needle illumination, thats another story..…

guys before trying to fit these could someone tell me the 'A' measurement i need to know if these will clear my 18" wheels or will i need some spacers? any help much appreceated :)

Yup that's right. My tyres are catching on the arches, so I need a way to stiffen/raise the rear end. I have just bought these tyres so I'm looking for the cheapest & easiest route. I have fitted some G14 spring assisters but they don't lift enough.

Hi! Had the Z for a month or so now, love it to bits but the bloody sqeeling of the belts was driving me nuts, so bad I almost sold her! Just sorted it out now, back to being a good bitch! The only niggling thing in her now is a sticking drivers seat belt.:p

...when youve got a Z engine bay! :rofl: :rofl: :rofl: + =

My oil pressure goes up from cold but reads zero when been driving about 10 mins. any reason for this?

...located at the back of the engine bay in the centre - wiring has snapped at the top and the bottom. any idea what it is? im pretty confident its not the idle control switch as thats yellow and situated further along.

anyone going to be there. ill be there from about 8.30

Anyone know how to identify the difference between auto and manual 300zx standard turbos and what the difference is between them other than 'bigger/smaller' ? Help appreciated!

Seems my mate got busy after watching the other video... so he made this comeback! :rofl: http://www.xtranormal.com/watch?e=20091001171421177

http://www.prestigemotorsport.com.au/modules/stock/index.php?StockID=4851 :eek:the front looked hideous but then I saw the rear:shock:very scary if under 18 dont open above thread

Any ideas on what suspension to buy that handles well but is not silly low?

Yesterday (Wednesday 30th September) parked outside White Post Garage on A614 near Bilsthorpe

Just seen a real nice bumper on ebay not bad as a spare,,have it a gander NO Ebay links from Regi Users!!!

... or know of them? 356mm 8 Pot K-Sport Brake Kit 300ZX http://images.google.co.uk/imgres?imgurl=http://www.db-power.co.uk/images/KsportBigBrakeKit-REAR.jpg&imgrefurl=http://www.db-power.co.uk/index.php%3FcPath%3D128_148_230_412%26osCsid%3D6c93294090a0d4e4c69e2f4f145af049&usg=__eAYiIjnGiL3k47sCgqYPh5i_K6k=&h=400&w=600&sz=90&hl=en&start=28&tbnid=NF26ssMcImhumM:&tbnh=90&tbnw=135&prev=/images%3Fq%3DR33%2Bcalipers%2Bon%2B300zx%26gbv%3D1%26ndsp%3D20%26hl%3Den%26safe%3Doff%26sa%3DN%26start%3D20%26um%3D1&um=1 :)

saw a blue z on severn bridge yesterday and asso a different one today ??

HELLO CHAP,,THIUGHT ID START A NEW THREAD AS DONT WANT TO CLOG UP NEXT MANZ... I HAVE A VERSION R 1997 300ZX,,,AS THOUGHT I BELIEVE THE REAR GARNISH TO LIGHT UP,HOWEVER MINE AINT. I HAVE LOOK BEHIND THE PANEL HAVE COME ACROSS A SET OF BLACK AND RED WIRES GOING TO THE BACK OF THE GARNISH,INFRONT IS A LITTLE BLACK BOW WITH 3 PINS,IT STATES RF 902 ON THE TOP OF THE BOX,IS THIS THE RELAY FOR THE 300ZX TO LIGHT UP? I HAVE CHECKED THE FUSE WHICH IS ON ONE OF THE WIRES CONNECTED WHICH IS OK,HAVE BEEN ADVISED ITS THE RELAY AT FAULT,IS THIS THE CASE??? CAN ANYONE TELL ME HOW THIS WOULD LIGHT UP?WHERE I CAN GET A RELAY FROM?IF THE BLACK BOX IN TH PIC IS A RELAY FOR TH…

Right guys i have been thinking about Performance of the Zed and mods in the Future.... So what is one of the main Restriction for power on our cars.... INJECTORS!!!! As turbos max out at 18psi, what holds you back is our Injectors which max out at 14.5psi! So next size up = 555cc injectors which seems excessive on an slightly Upgraded setup and requires specific chip for fuelling etc etc!And have you seen the f**king price of them!! Robbery or what!! So having a browse i see that the 350z (not a typo) injectors you can have Nismo 440cc injectors for around 1/2 the price for a set of some (300zx)Nismo 555cc injectors! Now as the injectors are only a small amount bigg…

what is the recomended oil to use for gearbox oil change?

Hi there im going to be looking in to upgrading my brakes soon,and wanted to Know which are better, drilled or grooved or drilled and grooved, plus can i put turbo 300zx discs onto an n/a if so will they go straight on or will i need to mod anything, any help will be greatfull thanks.:D:D

Hi i have replaced a Oil Temp Gauge with a different model, is it okay to use the existing send wire on the new gauge? (i've already done it, just want to check its okay) Also, i see some gauges are "stepper motor variety" , are there other types? Cheers Rich