General Discussions - 300ZX Related

What do you think of these?? in my car yay or nay?? I have full cream and black leather interour. or do they look cheap?? http://cgi.ebay.co.uk/Nissan-300ZX-Z32-Door-Sill-Plates-Polished-Stainless_W0QQitemZ270537750901QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item3efd4e7975

Had a look at some pics most just have a bolt in them and some I can see, What have you got in yours? Thanks.

Right well i finally got it on today and i like it. What do you think? The first is a before pic - the rest after.

I have been fitting the new EFI loom and have got a connecter that I don't know where it goes to. Its on the bunch with the AAC Valve, Exhaust gas sensor, VTC solenoid, Injector and coilpack. Here is a pic of the connector below. I ve looked at the online manual and it doesn't seem to show this connector. Anyone know where it goes please? Thanks, Ant

I have a Ashspec rad which doesn't have the pipe for the expansion bottle. Is it ok to run without the expansion bottle? I think I remember reading that it was ok but I can't find the post. So is it ok without? Thanks, Ant

im after some coilovers for my z tt. any advise on which i should bet? dont want to spend stupid amounts of money got about £700. i was thinking about bc racing? any advise or help would be greatfull aron

does any one know where i can get repacement arches as got some rust has just started in my rear arches so i want to cut and replace , there use to be a someone on ebay that did them but sods law when i need them they are not on there??

Sat thinking just now, I've had mine 5 years this summer. Probably the longest I've ever kept a car. How time flies! Apart from the misshap with a piston shortly after purchase, this car has been the most reliable I've had. Just wondering how long people have had their current Z for?

For several months now my clock has stoped working(no jokes I said clock lol)this morning I started up the zed and yes it has fixed itself and is working fine I just had to reset the time, I love my zed:clap:

My car smells very rich and working out how much fuel I went through with testing the engine I'm inclined to believe it is indeed running rich, would this be a problem with the o2 sensors? Or something else, I think I do still have a small air leak on the inbonnet fuse box air intake pipe to throttle body, could this also be a attributing factor? Or should I be looking some where else?

http://cgi.ebay.co.uk/FOLIATEC-Window-Film-ADHESIVE-REMOVER-150ml-22501_W0QQitemZ230439267590QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item35a7402d06 Anyone used this as the last owner did a bad job on the back window. Thanks..

Won't be to everyone's taste, but I think it looks absolutely amazing. Such a great stance, and an awesome set of wheels (Hayashi Racing 505) :thumbup: http://speedhunters.com/archive/2009/11/04/car-feature-gt-gt-that-240z.aspx

We all like good brakes and there are many ways to improve your standard set up but of course cost can be an issue. So quite a popular method is to retain the existing calipers and use adapter plates to move the caliper out so a larger disc can be fitted. But get the maths wrong and what looks like an upgrade can be much less than you think. Here is a case in point, bigger 330mm discs fitted using caliper adapter plates give an apparent extra 20mm of disc. But on closer inspection the pads have beome incorrectly position and as a result the pads overhang the disc by around 5mm. Further inspection reveals the inner 15mm of swept disc area is not in …

as ive got loads i want to get done on the zed. Fit full s/s japspeed system, refurb the wheels to silver from black, ditch the high level spoiler and skirts and go smooth Then get started on re covering the interior grey alcantara with new stuff. But this poxy weather is holding things up. Please bring on the better warm weather quicker......

I have a clifford alarm on my Z - its an oldish one (white fob!) The indicators flash when alarm 'goes off' but siren doesn't sound. You can press the unlock button and it will reset the alarm, although it doesn't operate the locks. Finally, it doesn't seem to immobilise the car as I can start it without even touching the fob. The person I bought it off said it was some connection in the passenger door, but there seems to be a multitude of faults there. Control module or something? Is it hard to rip it all out and get another one fitted? :boat:

Question I have changed the side light bulbs set in the Fog lights to orange. Bought some Clear indicator side lenses. plugged the Indicator into the Large pod, then clear small bulbs in the smaller pod of the indicator lense, and connected these to the now orange side lights, so i have two sets one orange and one white. The white ones now being the legal side lights but should I keep the orange or make them white as well (legal wise)?? If that makes sense

Hi Peeps Opinions please!! Got a Japspeed s/s exhaust that for me is to Loud and looks Sh*t Wanna get something that is a quieter and more refined without losing Power and breaking the bank!! bit of chrome would look good!! Any suggestions would be helpfull

saw you skirting around clatterbridge roundabout going out to willaston wed afternoon 24/ 2/ 2010

I have just put together my engine stand which arrived today and im going to need the bolts to attach it to the block, im thinking 10x100mm if anyone knows for sure please let me know. Also because of the pipe on the rear of the engine, it seems to leave only 4 mounting points. Anyone with any pics of the rear of the engine on a stand will be great. Last question, will it rotate ok on the stand or will it try to swing out of control, is it best to have 2 people to do it. Many thanks Graham

OMG what a day, I spent all of it fitting a new FMI. If you dont mind getting a saw to your freshly painted after market bumper then im sure its a quickish job. :clown: However if you dont want to destroy your bumper then you have to bend, hacksaw, and generally struggle with every part of it. Its like the movie Karate Kid but instead of "wax on, wax off" its "bumper on, bumper off" ahhhhhhhhh. And then when you wrestle with it all day so the fecker fits underneath you then need to fabricate two brackets to hold it all into position. Sure pleased that is out the way :no:

How do you tell that your HICAS inner ball joints are on the way out?

Hi, I was talking to guy on here last year who offered complete ECU swap outs for performance boost. Cant locate the thread now, does anybody have any idea who it may have been or of anybody else offereng this service? Z

Sill question and ive done a search but cant find anywhere what fluid the autobox uses Dextron atf 2 or 3?? as i have seen both on the shelf?? anyone? Thanks Craig

Spotted in the Services on the A20, heading southbound, just past Crittles Conor, parked in the Mcdonalds drive throu carpark, around 5.22pm 24/2/10