General Discussions - 300ZX Related

some of my window and roof trims are cracking and revealing the bright chrome work underneath. how do you strip all the black plastic coating off ready to re-paint, some of it just crumbles off in the hand but alot of it is still well stuck on..

is it possible to fit one without taking the front bumper off? Because the guy who fitted the bodykit took the gaps out and i dont want to ruin the bodykit. cheers Jo

Not sure if this is normal, or someone could help me with the issue, but my car is building alot of pressure in the front water hose, so much so that it gets bent out of shape is rock hard and the car overheats, now im not sure if this is normal for the hose to get rock hard. hence this post, now if this is not normal, might it be the thermostat causing both problems? no water leaks, radiator is new, and heater matrix has been bypassed as it began leaking, also there are no kinks in the matrix bypass pipe causing and loss of water cycle.

Hi guys, merry Christmas to all! As a Christmas treat for me, whilst I was running the engine and checking the coolant, my car decided to lock both doors. Unfortuately I only have 1 set of keys and they were in the ignition. Hmph, disconnected the battery and the PTU to stop the engine etc and went to find my spare remote locking transmitter fob. It did nothing. So, I swapped the battery but of course this needs the fob to be resynched with the alarm. This didn't work either, totally dead, presumably because the igntion is still in the 'on' position the remote will not operate the central locking... So, the only option I can think of is to shove a screwdriver in…

Well got my rust free tail gate, which I have been looking for ages for one, I have a set of standard perfect rear lights and a power steering pump, so Iam nearly there ready for spray then on the road. Mark:-)

http://cgi.ebay.com/ebaymotors/Lowering-Springs-M2-Nissan-300ZX-Z32-Turbo-90-96-New-_W0QQcmdZViewItemQQhashZitem48394a5058QQitemZ310198816856QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_3484wt_1046 As far as i can see all springs are made the same way. Does brand really matter? Ive asked for a postage estimate. Mark

My Car is finally away to the car park in the sky, I have a final picture taken by the wife as I was working, for me sad to see but hopefully in the future when finances prevail I will deffo get another. I have just subscribed but more than likely wont be around as much. I have wings/bonnet/targa tops/doors which I will list soon as well as a radiator and some other bits n bobs. Cheers John

just been looking thru the mods on my zxtt,says has got uprated 5 stud garrett turbo's + divorces turbo elbows + is stage 3 chipped.anyone shed any idea on what sort of power increase these give?also has custom built twin exhausts with no cat.:huh:merry xmas & happy new year to all.:thumbup:

Eating smoked salmom on toast with black pepper sea salt and rocket :) with a glass of prosecco, Merry Xmas :) Got Bubble on the hifi:)

I have an after-market wheel to fit (which currently has a Pulsar boss attached) and I'm looking at this - http://www.racerbits.com/servlet/Detail?no=558 Does it look to be ok for a N/A without cruise of air bag? Horrible centre badge I know... I've had probs in the past with boss's not cancelling the indicators etc...no tag on the bottom to cancel them. This one looks nice but it more than twice the price - http://www.zcentre.co.uk/index.php?page=shop.product_details&flypage=flypage.pbv.tpl&product_id=206&category_id=76&option=com_virtuemart&Itemid=7 I'm staying away from the ebay ones at the mo, don't trust I;ll get th…

so what you got this xmas ? I got myself a set of meisters and three new digital iridium drift guages. and that's just was I bought for me, no idea what my wife got me.

its got an up a down and and auto setting with a pic of something that looks like a fag next to it, but wot does it do???????????????

how do i remove them? where can i get better ones and what should i expect to pay. mine are showing metal through and one side is split. can anyone also tell me re replacement clips for the trim taht goes up the front windwow and over the roof are available want to pull it off and spray it black.

I found myself in Buslingthorpe today not far from Lincoln and there is only 5 houses i think in the Village however at the end there are 2 zeds parked in a driveway. One H reg UK spec and a M reg Jap spec anyone from here? Oh and im sure you will read this Baz was that you on the bridge over the Brayford today in the Jeep? I thought someone tooted and i saw a Jeep past me in my wing mirror :) Marty

http://cgi.ebay.co.uk/Detail-165-GC-Racing-Nissan-300-ZX-IMSA-Mint-Box-/260709831074?pt=UK_ToysGames_DiecastVehicles_DiecastVehicles_JN&hash=item3cb38451a2

Hi guys hows it going.. I am a new recruit of the 300zx scene and recently acquired my targa about 3 weeks ago.. I only bought it to hold up some money so i didn't spend it all with the idea of selling the car again in the summer.. However i love it! So that has put a hold to that situation.. anyway I have had a look and my car is leaking oil out the bell housing where the gear box meets engine. There are no cracks so i reckon it is the oil seal in the gear box.. Has anyone done one of these or had similar problems? My car has only done about 80k and the engine is sweet as a nut. Its all clean underneath no rust etc so I cant see why the seal would have gone?? I…

Having had blue light illumination in my pods for some time and as I am a complete fiddler and always seeking improvement, I have fitted a combination of red and blue led bulbs in the pods :cool3: You will see above the red bulb illuminates the red 'heat' graphic and two down I have fit a blue bulb and this lights up the cold graphic bar quite well :yes: You will notice the knob is missing for the speed control so I desperately need one?? Anyone please!! Also 4th speed graphic is missing but this does not bother me as much as the missing knob!! :angry: This next one is the right pod we all have and just a simple alternate red and blue configuration, …

I had 1mm boost jets in my zed when i bought it, but have removed them as i was getting random boost spikes, but have had an idea... What if i was to put a 2mm jet in each end of each pipe? In theory that would still effectively give me 1mm, but with the gap inbetween, might cure the spikes? What do ya reckon? Tudor...

http://cgi.ebay.co.uk/19-L-M-MESH-ALLOY-WHEELS-NISSAN-300ZX-FAIRLADY-TYRES-/110628004936?pt=UK_CarParts_Acc_Wheels_tyres_Trims_Car_Rims_ET&hash=item19c1f16448 Always liked these but never seen them at this price:ohmy:Great alloys with tyres:thumbup:anybody after alloys take a good look at these.

Trying to find some pics of any Z with the TEIN SS installed to see the difference between how it was from original and after installing the TEIN how low it sits..I´ve looked all around the net and google and no luck, if anyone has any of finds them please can a pic be attached? would really appreciate...need to know how low it slamms... Merry Xmas!!!!:yes:

Is there any particular reason why this book is so expensive? http://www.amazon.co.uk/Nissan-300ZX-Enthusiasts-Companion-enthusiasts/dp/0947981527/ref=sr_1_1?s=books&ie=UTF8&qid=1293204104&sr=1-1

Hi all, I have an exhaust question, WHEN I get a Z i want to get a nice system but a Duplex Single box twin exit pipes either side, kinda like the 1996 mr2 style, doable? kind regards adam

Is there any difference between jap and uk spec headlights if so which is better?

do u think i could get rid of my indicator on my wings and smooth them off. I think it would look mint. But then i would have to put one in the mirror? What do u think

if my upper wishbone arm aint standard and needs to be replaced do i have to change both?