General Discussions - 300ZX Related

i'm very tempted to reskin all the door card not just the centre section so wondering if any1 else has done it and got any pics ... cheers :excl:

I've had a bit of a stuttering problem that goes away if I ease off the throttle and then accelerate again (most of the time), it reminds me of how another car I had dorve when the throttle position sensor was playing up so I'm going to try a quick TPS swap over to see if that remedies it before investigating further. Question I've got is - is it the same TPS for auto and manual, tt and na? Mine is manual TT import. Cheers

I saw a nice grey import 300zx on Lower Road in Stoke Mandeville around 5.30 this evening, heading into Aylesbury..... ......I was driving the other way in a silver SLK and flashed my headlights at you! Anyone on here? Richard:thumbup1:

As per title, I haven't had time to phone them direct but figure that quite a few guys would have had there's done at Zedworld, so was wondering what the going rate was?

Arriving shortly and hopefully fitting next week ! Can't wait.

Very surprised there is no bids on this,is anybody watching? Wish I lived in England sometimes. http://www.ebay.co.uk/itm/1992-NISSAN-300ZX-TWIN-TURBO-RARE-SWB-2-SEATER-NO-RESERVE-/230786896015?pt=Automobiles_UK&hash=item35bbf8908f

quick question, i am looking at gettin a new set of shoes for my zed. i want either 19's or 20's but my zed has been lowered. i know alot of you have large wheels, so the questions are, 1. will they fit without any problem? 2. what offset is the best one to get? any help will be gratefully received. Dave

Hi mate's Im pissed and kinda happy at the same time, got my wheels last week delivered from drift works ,called them a bunch of times asking about fitment. they said et 30 was ok for my car but i guess there wrong. i put them on to day with sum budget tyres for the mean while "SUNNY 255/35/18 FRONT AND 265/35/18 BACK" WAS LOOKING COOL! heres a pic! i went round the corner and i hear a grinding noise, im saying wat the **** was that !!! its the wheel grinding on the caliper lol so im like ffs new ****ing wheels lol ("THANK GOD IT WAS IN THE INSIDE") So i go and get 5mm spacers for the front(for an offset of et25 now!) it now looks li…

In the process of installing the BC Coilovers suspension..I been adviced about getting the kit cambers front/rear on the Z; question is; I barely drive the Z that often; I mean weekend drive..some long trip once &while...I mean is it nessesarily recommended to install kit cambers with the BC Coilovers? tires would waste so soon?

Hello U.K. Z owners, I would like to introduce myself. I am an owner of a 1991 300zx TT over here in the U.S. I love the Z car and am amazed at the toughness and quality that Nissan put into our cars. The performance that we can get out of the stock components that are now in my case 21 years old is amazing. Here is a list of my upgrades, JWT ECU JWT intake Profec B Spec II Dupree SS Downpipes Cat Deleted 3 inch exhaust Z-1 Larger intercoolers 60HP(44KW) NOS wet system Mechanical Fan Delete--Electric Fan installed One Piece Z-1 Drive Shaft Clutch Master Stage 4 NGK Copper Plugs Larger Oil Cooler I am still running the original stock si…

Hi all, If I get a carputer installed, what type of connection does the Z32 have, to give out readings and diagnostics? I know how to create the GTR Digi Display using the OBDII connection, but have just realised the 300zx doesnt have OBDII. This is the sort of look I would be going for: and I would like to get the dash flocked in black, for a suede effect, which wont peel and then have the center console customized, and wrapped in leater with a contrasting double stitch, to surround the screen and heater slots, right the way down through to the gearbox surround. Anyway, if anyone can offer help or advice how to get the si…

Just done a deal for these :) 19" with tyres £250 delivered i think thats a pretty good price concidering the tyres have all got good tread :) and before anyone says it , yes i know there reps :)

Will this gauge pod holder fit right in the zed or am I better off buying one from z centre which is a lot more expensive http://www.ebay.co.uk/itm/Double-Pillar-Mount-2-Gauge-Holder-52mm-Black-RH-DRIVE-/380364309340?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item588f7ac35c

Look how much these are and are not the light up type :no: Don't expect he or she will get the asking price though :huh: I saw some local to me, the same for a LWB, they were slightly damaged and went for around £30.00. http://www.ebay.co.uk/itm/JDM-Nissan-Fairlady-300ZX-Z32-Rear-Quater-Window-Visors-RARE-2-2-/230787542388?pt=Motors_Car_Truck_Parts_Accessories&hash=item35bc026d74#ht_2404wt_802

So twice now after very heavy rain I’ve found a little aquatic gift from the heavens in my drivers foot well… The mat had a good cup full of water on it… don’t even know how much has soaked into the carpet… I’ve checked the targa drain and it’s working fine, I can only assume its getting in though the widow rubber but can’t see any tell tale signs… looks like a hose on the roof job over the weekend.. Anyone else lucky enough to have a mobile foot spa?

hi can someone mention to vodkashots nobody can pm him his in box is full

Guys as you may no I am setting up a ramp buisness but in the mean time really need to get by decat on any my na ideas help please

Hey guys will these sizes fit my zed as found a set of wheels i like my car has been lowered an inch or 2 i belive fronts 19x8.5j ET 35 tyres 225/35/19 rears 19x9.5 Et 38 235/35/19 Not bothered about doing abit of arch rolling etc just dont want a major headache

Hey there need a sincere honest advice; here it goes; when I bought my Z couple years back in Italy the guy whom I bought it from had it completely stock; that is nothing changed except for the fact he had MAK Velano wheels (still does) the rest it´s completely stock originally..well it has the sungard tinted film on the windows..inside nothing has changed; the thing is a while back I am thinking about putting the BC Coilovers to slamm the Z..and I also was thinking about putting the JDM 99 rear lights; and also changing the speedo meter from white to blue leds...and I also has put the red stitched shift knob and handle break; The thing is.talking to him today after …

http://www.ebay.co.uk/itm/1991-NISSAN-300-ZX-STROSEK-TWIN-TURBO-/200755383031?pt=Automobiles_UK&hash=item2ebdf40af7#ht_500wt_1361

got the engine out today wasnt as hard is i thought..(fair enough the egr bypass hd been done which mad things slightly easier) left the gear box in place was so much easier than faffing about pulling the prop and dropping the box..just climb ontop undo the wter pipes and you can get to the to gearbox bolts took 5 hours all in happy days now iv got a few weeks to clean the engine bay up and respay it

ha antone got a spare set of alloys for an audi i can borrow as want to get original alllys powder coated so need to swap to get done any 5 stud audi car in garage and wont be used so any ones please

I know it,s a long shot but does aybody know of a way of changing the front n/s injector without removing the plenum ? i think it,s died You can clearly see one screw but the other looks near on impossible to get to without removing everything :surrender:

has anybody got any pics showing where the water drains out from the targas . i need front and rear . if i can get into the drain route well enough im hoping to make a complete drain tube with no joints and possibly an extended piece to take the water away from the body underneath the car. i just need some outlet point pics to get me started. cheers andy

Anyone know where you can get similar types. This particularly http://www.sarona.com/Sarona/www/SEARCH/showInfo.asp?PRODUCTS.PRODUCTCODE=NS-046-TW&MAKER=Nissan&MODEL=300ZX&PARTGROUPID=2&PART=Trunk%20Wing&BODY=2%20door&BODY=2%20door&PRODUCTS.DESCRIPTION=&OTHERINFO.WDESCRIPTION=&FROMYEAR=1990&TOYEAR=1996&PRODUCTS.PRICE=320&IMAGES.IsAdd=0&IMAGES.WEBIMAGEPATH=Nissan/lowwing300zx.jpg&path=../IMAGES/Nissan/lowwing300zx.jpg