General Discussions - 300ZX Related

Been trying to get in touch with Graham but had no joy :crying: Cheers

what is the correct weight of the 300zx tt iin kg? am gettting conflicting info online

My own stupid fault, not checking where I was driving. I'm so pissed off with myself :mad: :cursing: :censored: :cry: :hang: [ATTACH=CONFIG]73342[/ATTACH] Definitely not repairable this time, can't cover it up with duct tape for a while and then get it bodged, it is well an truly gone. I'm not even sure I even picked all the pieces up, indicator's ok, and nothing else is damaged, but the ****ing things only a couple of months fresh :cry: :cry: :cry:

Hi is anyone local to Stanford le hope essex or around London that has a spare CAS unit I can borrow. I think I just found out where tje mysterious noise is coming from. Will only need to test it on my car for a few minutes. Thanks Dan

I replaced the front wiper amp today because my wipers do not work. If I turn them on full and then off they wipe twice and stop. Any ideas?

can anybody bring timing light and consult to jae ? just want to check if my timing and tps is ok. thanks

Hello, I hope You guys understand what i mean... So i got strange problem with my car, when i rev it really high (no matters i drive or on neutral) one (or more) of my cylinders stops working for a while. After few moments everything back to normal. For example, i accelerating hard on 2nd gear, put 3 and no power, engine work like tractor. The same thing is when my car standing somwere, i rev it to red line and then its start work really bad for a few moments. No air leaks, i check 2 fuel p. regulators, i install new fuel lines, i got series 2 PTU (check 2 of them)... Help pls?

sit in killie on the road up to morrisons..been resprayed mattblack n lime green

I have the DTA licensed Conzult which has a seriel connector on the interface lead...it wont open COM1 port on my laptop (error 5) although the freeware version with the USB connects no problem...Will i need to get a seriel to usb adapter to run it or does anyone know a fix?? btw,i have COM1 port open atm.

Hi! I had helpful responses to my last request for advice (thanks guys) but made the mistake of burying a second topic in my post. Seemed a good idea to make it a topic all on its own! I'm OK with my brake set-up generally (floating Brembo discs and AP 6-pots with Ferodo DS2500 at the front; grooved discs with standard Nissan calipers at the back; braided lines and Dot5.1 fluid) but the pads on the back are completely anonymous and look standard. What do people use on the back for fast road/occasional trackday use? The Ferodo website is completely silent on Z32 rear pads. I've think read I've read that the rear calipers are the same as the Skyline or somet…

Hi any one know here its the best place to buy a 99spec indicator? Thank you

Hi guys, Having issues with my bloody brakes... trying to bleed the brakes, and pedal keeps sinking. clamped the rubber hose at each caliper one by one but pedal still sinks, Tried another master cylinder and still sinks. checked for leaks and nothing, Only thing I have noticed is when im bleeding at abs pump u here the fluid hissing while pumping like its releasing the pedal pressure inside the pump. starting to think its a valve in the pump open is this possible lol... Anyone got any ideas..

After finishing replacing my stereo and CD player, I thought I would go for a quick spin. After a couple of miles I noticed that my temperature was slightly up! (the cars that is, not mine. lol) so headed home. When I pulled up onto the drive I was horrified to find steam billowing out from under the bonnet. It was coming from the drivers side of the engine at the back and was coming up from below the brake fluid reservoir. Any ideas as for the likely cause??

Just a quickie.... ;) Would a T10/501 bulb be suitable for a front repeater filament? Would there be enough illumination from this, and would the repeater flash at the standard rate? Cheers, Alz.

Got engine running but after 2 mins roughly the aux fan kicks in and stays on regardless of temp switch bypass, is this a sign of a faulty ecu? Tried my own ecu on it and the car is fine! Probably answered my own question but I'm a bit miffed as I have to swap my ecu from my main z to my track one, I purchased the impul ecu so I didn't have to do this

Hi All, I'm picking up my new zed next week ('90 import TT auto) and have booked her in for an inspection/re-commission at MWP. The car had a cambelt change 4 years/6k miles ago and more recently, new discs and pads-f&r, shocks and springs. I'm thinking that apart from getting it up on the ramp and looking for bushes to replace etc, the next job should be fitment of an oil cooler for the auto 'box (given the year). What do you think? Am I on the right lines? Many thanks. N.

...well 300zx porn of course. For anyone that hasn't seen this, it is a thing to behold. That engine bay, and the interior.... WOW. GT3 seats work amazingly well, just happens to be a set on ebay at the moment, but replicas aren't' too dear in the grand scheme of a build like this. http://www.stanceworks.com/forums/showthread.php?t=19185&page=10 You have to respect the length of this project, it is a real passion. and for a car which is so unique... I would pay to see this! Best, William.

Hi guys,I just got a new battery for my z,the car way lying for a few years and I was just testing out the electrics but for some reason the front indicators won't work,would you guys have any idea why this happened as they were working the last time I drove it,any help would fantastic.cheers lads :no:

Today i left the house early to travel to Angelsey (North Wales) and once loaded onto the car trailer i had joined the manual zed club..A nice sweet running S2 in black,propper straight black too unlike my S1 metalic black. Few bits of cosmetic but a really nice rust free late 92...Also picked up another TT engine and a licensed DTA consult package. Iff timbomax reads this then it was good to meet you today mate and thanks for all the help loading the car and engine onto the trailer:thumbup1:....Pics to follow.

is is possible to fit 18inch wheels of a 350z on to the 300zx

I signed up to an agreed valuation insurance policy with Sky insurance approximately 6weeks ago. As expected they took payment of the full premium immediately. Only today have I received confirmation of the valuation they are willing to agree - £5k!! After close to 6yrs of ownership, a shed load of receipts and proofs of work completed and a valuation from a recognised car club this feels like a a kick in the teeth! My questions are these: 1. Am I being unreasonable when all the evidence available to me suggests this value is 35% of what I was expecting it to be? 2. Have any of you had this situation? What are my options for recourse? I took the policy solely be…

Hi hoping someone can help me here.... Just changing the cambelt on the car as the original new but old one fitted was on the engine for 4yrs with 0 milage. Anyway I was just fitting the spacer plate between the cambelt sprocket and under drive pulley and noticed that the spacer can freely spin. Should there be a key way to hold it in position? As there seems to be a groove in the crank to place one.. The only one I have is for the under drive pulley. Im guessing its job is to stop the belt from running off the sprocket? Can I do without it? Thanks Dan This is the plate in question

At the weekend the lockup looked like this Now it looks like this After 2 years tucked away I've decided to use the z31 again and have put the z32 away for a while. Slightly sticky throttle and the brakes need ran in to remove surface rust but apart from that she seems in good health. Had a service, think brake and ps fluid could do with being flushed too, one coolant hose was brittle and has been replaced but apart from that i think its good to go. :thumbup1:

when i drove my baby home the very first time she leaked fuel when filled from where the filler tube mounts onto the tank looks like the local mechanic did a bodge job :asshole: is there a supplier who can supply the correct gasket so i can sort this very quickly even though i have my ticket for jae this puts my attending in doubt

I brought a 300zx tt yesterday but on the way home it overheated and the oil pressure was low and had no power. When it got hot it was making a rattling sound but now its cooled it starts and sounds ok, just running lumpy. I have checked the oil and that looks ok but the coolant is very low. Do you think this sounds like head gasket failure?