General Discussions - 300ZX Related

Just noticed a listing on Ebay for a UK spec Cruise Control Module - £20 plus delivery. They claim that fitting this UK module to a JDM car will allow cruise control to be set at speeds above 69mph. Does anyone know:- 1. Will this allow higher CC speed settings? 2. Where is the CC Module located? 3. Any gotchas? Many thanks

Q. Why did the man drive his Zed 135 miles a service? A. To drive the 135 miles back. :tongue: Cheers Jeff.

I need to buy a new spark plug socket for the Z32 plugs as the one I have has lost its rubber insert. What size is it???

Let's keep this one simple... Got the plenum off, was gonna do an egr delete, got the delete kit. Now the issue.... It's an absolute sod and I can't even see the pipe that comes from the manifold (It's a tt) Can I remove the vac line and take a hacksaw to the pipes coming round to the plenum and be done? Am I right in thinking the valve is normally closed? I know purists amongst you will have you opinions but I'm mainly just after a yes or no with this one. I'm only thinking of this lazy way out because I've already bought the delete kit and one of the gaskets for the pipe into the plenum is a bit mashed. Dunno if I wanna risk putting it all back together onl…

As some of you may remember, I'm having some exhaust trouble so was shopping for one, I'm basically still struggling to find one I like, but I was hoping to get some combined postage savings from the states when I get the stillen lip. so the favourite's so far are the B&B or the Labree, however the B&B is only in a quad exit, and the only labree one I've seen that I like is also in a quad, and although my mind has changed and I am now becoming a fan of the quad exit, I'm concerned if it will fit through my bumper, and not look sh*t to give you all an idea this is what my current one looks like And the only other picture's I can find are these t…

I wanted to go down the hardpipe route but can't find one that I like (would love a CF look kit or a gloss black finish). Anyways, my hoses need replacing and I hear SFS are good but not sure of the sizing I need. Does anyone know off the top of their head what size hoses and clips I'd need for the x4 intake pipes? Thanks

Have a look at this guys http://vimeo.com/72915329 http://www.customcreationpaints.co.uk They have some very very interesting products, im going to order the hydro chrome kit soon and have a go

Spotted you turning out of a Meath St onto Battersea Park Road heading west around 2.30pm last Saturday. I was stood on the corner of Battersea Park Road and Queenstown Road waiting for a bus...lol You looked good! Spotted you as soon as your nose cone peeped around the corner!

hey Guys, Just wonder, how much would someone expect to pay for an alcantara interior?... I know there is one breaking on here after JAE so just wondering what teh going rate was usually?... Best, William.

Just browsing for a new sound system. At some point the speakers will need doing but the current CD player is below par for me. What do you guys think of this? http://www.ebay.co.uk/itm/7-inch-double-DIN-Digital-HD-Touchscreen-Car-cd-DVD-player-Stereo-REVERSE-CAMERA-/171064893344 Sounds pretty good :glare:

Are ally subframe bushes any good?

:balloon::balloon::balloon::balloon::balloon::balloon::balloon: less than 2 months ago i started looking at 300zx's and 350z's and low and behold one of my bro's at work bought a smart 350z in silver i kept pondering on which to get finally choosing my baby 300 zx tt in sexy pants red and now yep you guessed it in the car park today ----- a very clean 370z in copper so in a matter of a few months our works car park has become one sexy place to be so we have a true speed nutter in silver a cruiser in sexy red and i am sad to say a never to be out copper ornament (he has four other cars only ever drives a battered peugoet …

I need a rear bumper registration light any idea on where and which would suit as I'm stumped.

as above got caliper assembly & rotor off + tie rod ball joint, just got the lower ball joint & kingpin lower nut & the actual removal of the hub & steering knuckle assembly to go..... Question is how do I separate the assembley once the king pin & the lower arm nuts are undone ? do I need spring compressors or is it a case of a long bar pushed down on lower arm & lift off??? Hope this makes sense..... Cheerz Jamez

For those that missed it yesterday I smashed my bumper so it looked like this But today I've been busy and it now looks like this I'll update more on the progress as I go along.....

Ive had 5 zeds in the past including my current one...1st was a manual in 2001 then 3 auto,s and now my latest S2 manual.Ive always been the 1st to jump on stage and fly the flag for the slush boxes but after a good run tonight in my latest manny i can honestly say they are a complete diferent driving experience and bring the car alive like you would,nt believe.Far more sure footed in to bends and out the other side and the power delivery is like night and day...fantastic:thumbup1: For anyone thinking of getting rid of the Auto and converting or changing car then my advice would be to do it and re-kindle the love for these great cars as they were meant to be...

hey guys, for some time iv been needing a new compressor for my air con and i finally got a second hand one of eBay. My question is how hard should it be to turn by hand? because when i got mine it i had to use a socket to turn it. iv repaired and gassed ac systems loads of times before but never on a zed and I'm positive i should be able to turn it using one finger. iv since filled it with pag oil and loosened it up but still not 100% about fitting it and contaminating the rest of my system if it eats itself. any suggestions would be appreciated thanks :D

Hi guys been trying to find a small rear lip spoiler maybe a carbon one which still retains the perpex infill panel .Has any one seen one they seem popular in the states but they look like they fit into the boot infill recess where the perpex panel goes any pics thanks Taff.

found this what i want to know is there are cheaper way of doing this or is this the best way http://www.z1motorsports.com/product_info.php?cPath=6_343&products_id=1080

If anyone was going to put a pair of vents into their bonnet, where do we think the best place might be to position them...? Would they be better at the front or at the back (either side of the bulge) so as to evacuate some heat from the turbos a bit quicker? Any thoughts?

Just seen a J Reg silver zed on station road, I was in my van, looked a nice clean one :)

Anybody know anything or recognise this? I feel it's overpriced for faults it has. http://www.ebay.co.uk/itm/1990-Nissan-Fairlady-300ZX-Z32-MANUAL-one-off-Jap-drift-PROJECT-SOLD-AS-SEEN-/271273976692

Two pics od car in paintshop.ten days to go to pick up and colour pics to filmów when i get.

In an effort to try and reduce ever spiralling costs Bob has decided not to have Ben and the Eurospec guys provide full "on Event" support, although they are still preparing the car beforehand. When Bob first started out on trackdays I just went with him and we did all our own work. This time I am delighted to announce that I have enlisted Paul. (111Mattin111) to join me on the team. This will allow Bob to focus solely on driving.. As I am now over 65 I felt the need for some extra help especially if we have to do multiple wheel changes on top of the usual stuff so Paul fitted the job description perfectly.:thumbup1: Im sure he will be a great asset . Paul will …