General Discussions - 300ZX Related

Help.... I've recently (1 week) purchased a uk supplied 300ZX with a Nissan CUR 20-GB alarm/immobiliser fitted. I've had a look around to find some more info about this system but no luck, does anyone know if it's Thatcham approved etc or any other info.

i loose my adsl connection tomorrow, and have at least 6 days before i can get any other service installed so i hope you can all behave yourselves for a week or so while i am away nothing like 24 our notice of disconnect hey ?

Hello, My Air Flow Meter's gone (again!). If anyone is breaking a ZX and wants to sell-on this part, please call me on 07977 267707 or mail me on drewkearney-eds@eds.com Cheers Drew

anyone use this currently ? good or bad ?

www.twistedtunes.com Taliban on the Run is a classic T [This message has been edited by TT Tim (edited 10-12-2001).]

Hi All, just taken the battery out to change the nearside oxygen sensor and it won't budge. Nissan say you need a special tool anybody got any ideas??? Regards Mark

afternoon all. my pipes have turned up this morning and was wandering if someone could explain to me what happens with the sensors that are currently down there on the exhaust system. i believe there are two fifferent types, something like the air/fuel mixture and something else but i could really be talking out of my arse all info will be greatly received many thanks Martin

Hi guys the recent interest in the braided hose upgrades for the brake lines had me thinking and as one of my customers actually manufactures these thing for industry,it would not be too dificult for them to produce these for us,however I need some technical info like pipe diameter and length and types and sizes of end fittings. Alternatively if any one can lend me a single pipe for them to copy (I know its a lot to ask)that would be even better.Indications are a group buy would attract a very good discount Cheers lads Jeff TT

prepare to be bladed

I have noticed a slight groan, for half a second or so, when the turbos first start to boost! Any ideas?

to ask for christmas 7' LCD screen $499 alpine CDA7875 $349 alpine MRV-1507 $499 alpine NVE-N851A $1699 gps and dvd system Nismo keyblank $56 Z keychain $19.95 stillen 3 guage console $292.50 not to mention the zeemax panel, turbo timer, boost controller, greddy td-06 turbos (hey i can dream can't i? ) carbon fiber body (still dreaming), stillen spoiler, fittapaudi tubular 17inch rims, yokohama parada's, stillen intercooler, blah blah I'm not asking for much serious ;c

I've just tried to order a pair of Cobra seats to go in the Z, but they won't fit. Does anyone know of any others that might. John PS they told me Corbeau don't either

Guys I saw this http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=598879470 on Ebay and sent the seller an email to see if he could make a 180 MPH version for those of us with Jap imports. Here is his reply Dear bruce@netpd.com , Thank you for your email ! I am able to make any design on 300zx gauge for you , but I need no less than 50 sets order from you inorder for me to do it , I can put any thing on the gauge for example your club name . The lettering color can also change to any thing you want (No more than three colors on the gauge).The price will be about $55 us each , If you can put up 50 sets order from your club ,…

Yes I know its coming to everyone sooner or later but I just could not find my fuel smell source(s) until this AM minus 4 deg. Looked underneath and saw drips to a nice little puddle of fuel under the car just between the bell housing and engine. Looked up top again and nothing - then I sees its just moist under the fuel pressure regulator RHS - black plastic thingy between 2 rearmost intake tubes rhs. Cant see it coming from the rubber tube conns - IS it the regulator that leaks???? and enough to make a puddle underneath? Maybe thats why I'm down to 16mpg! This is defo not a car for smokers! Not that I'm one anyway.

My Drivers Side 'Main Driving Light Bulb' has gone (Ran off with Jack Frost!!) As I havea UK car do I just go to Harry's and get a new one? Is it easy to fit a new bulb? I need to get i done today as I need to drive today! tick tock tick tock tick tock tick tock..... As ever in your debt, Matty. ------------------ Bounce...Bounce...Bounce...Bounce...Bounce...Bounce...Bounce... (sorry no sound!) LOL

$130 AUSTRALIAN and they are yours. Hmmm how many guys would be interested in this? [This message has been edited by craig (edited 10-12-2001).]

Does anyone know of any cheap websites where you can buy electrical goods like VCR's, DVD players etc. I've tried a few but they are all virtually the same price as the high streets.... Any help would be greatly appreciated. Cheers Chris

last night saw this class looking Z on the Rettendon Turnpike roundabout on the A130 heading towards South Woodham Ferrers in Essex. It was a deep metallic purple with a complete Veilside kit. (Similar to Sennas without the big spoiler. I pulled up behind it and the exhausts were vibrating my car like anything!! This motor looked proper flash. If its anyones on here, gets some snaps of it now!!!! Chris

I talked to a jeweler about custom jewelry to create a all metal silver key to look exactly like the titanium key, he's creating the mold now and it's going to cost me $45 for the mold and first key, if it turns out good he said he can make more key blanks (cause he'd have the mold from mine) that he can create replicas for $20 each I'll post pics later of how it turns out, if it turns out good anyone else intrested?

this is such a half assed paint job, the guy should be shot for turning the Z so ugly.....

ok, theres been loads of posts on the new springs and shocks group buys lately but no-one at all seems to have mentioned anything about any of the bushings or camber adjustment. There are people on the forum who know far more about this than me but surely if I get someone to put on my nice new springs and shocks they're going to completely upset the relationship of my tyres with the road. Are the stock upper links on the front suspension adjustable so we can set up the camber correctly ? Don't fancy wearing out a set of tyres in an afternoon.... well I do, but not like that. Also at the back know even less about this, surely a camber adjustment is needed here too if…

I found this 2day, a site that has some options on customizing your gauges - http://www.mmrusa.com/gauges.htm ps, it states "If your vehicle is not listed in this chart MMR can make them for you!!!!!" - Assuming they can make them 180mph donno, I'll call Monday when they're open and get some info on that, for you guys. Droop [This message has been edited by Droop (edited 10-12-2001).]

Oh shit, my life story just overflows with one thing going wrong with my Zed after the other ... Today, after having installed a shiny new JWT pop charger, the car has developed what I can best describe as a "lumpy cruise". Basically, driving along at a steady 70mph (on the motorway), the car seems to accelerate and decelerate ever so slightly all on it's own accord. It is almost as if there is something that is temporarily increases the air resistance and then disappears again. (and before you state the obvious, no it wasn't windy) It causes the normaly smooth cruise to be jerky (albeit slightly but enough to annoy me and defo enough to have the girlfriend give me f…

Just incase anyone is after a Tracker for their motors i am now doing them. I will of course give you the best prices i can. Check out teh Tracker web site for a bit more info. Bob

Did you get my email m8? Cheers, Az