General Discussions - 300ZX Related

next time we get "I'm thinking about buying a Z" send em here. For those of you that have read this already sorry for being a bit behind the times. http://www.ukcar.com/sframe.htm?/road_tests/nissan/ZX300/ later

We had a great meet today at GPS,13Zs in all colours and kits,Duffman Muffman with his vid running Poor Tooley has to make a sharp exit as he had the shits .The green pepper and the red tomato could not get it on as it was pissing down ,Next time Ginger!So come on Duff Muff get the vid on here so we all can see it,Watch out for Tooley who had a close shave with a BT box . ------------------ [This message has been edited by MAC 1 (edited 27-01-2002).]

G reg Black, 5 star Alloys HKS everything Runs but LOW compression on 3 cylinders Must Go make me an offer

Hi I been trying to check the lamda sensors, first problem is I definately have no mode selector/pot on my ECU. I have the red LED and just a hole with no pot there, therefore how can I switch to the other side???? I managed to do the other side but I think it could be shot 'cos the check LED stays on for 14 - 15 secs then off four about 4 - 5 seconds while holding the revs at 2000rpm. According to previous posts it should flash five times in 10 seconds anybody no what the problem could be?? cheerzzz

cam accross this site, pretty kewl, got loads of goodies in it. I like the Electronic Scrolling Message bored for the car.. Tell Other Drivers What You Think hehehe http://www.boysstuff.co.uk

Does anyone have any experience of upgrading their grey cloth seats and trim to leather? I see Z centre does custom set and so do AtozZ toys. Are these the same? What's the quality like? Luke, if you're watching, are Z centre's full leather or vinyl backed? Does anyone know an upholsterer in Hants area who will fit it all? Anyone interested in a group buy? Cheerz guyz.

I seem to have a vacuum hose left over though... D'oh I dunno if anyone will spot it - but it's sticking up just to the right of the right hand side throttlebody (you can see the small silver spring clip) Actually here it is marked; According to the docs it should go to the underside of the TB, but I can't seem to see where Can anyone help? Thanks guys.. Az [This message has been edited by aaronjb (edited 27-01-2002).]

Hi guys, as a Z newbie but not to much of a bad hand with motors, i got home this morning just as my headlights and dash lights started to dim, then car started running real bad as i got on to my parking spot then conked out. After investigating i noticed when i put my meter over the batt terminals, i was not getting any charge from the alternator. car will jump fine and run for a little while then again die. so my conclusion is most proberly the bushies but the odd escort or cav wouldnt be a problem, i just about found the alternator on the Z. any body ?? oh by the way, its a Z31 1986. 07980800027 [This message has been edited by stuie.buckmins…

Hi guys, as a Z newbie but not to much of a bad hand with motors, i got home this morning just as my headlights and dash lights started to dim, then car started running real bad as i got on to my parking spot then conked out. After investigating i noticed when i put my meter over the batt terminals, i was not getting any charge from the alternator. car will jump fine and run for a little while then again die. so my conclusion is most proberly the bushies but the odd escort or cav wouldnt be a problem, i just about found the alternator on the Z. any body ?? 07980800027 ok maybe wrong section opps [This message has been edited by stuie.buckminster…

What is that headlamp panel? from what ive found out its a Stillen one. Where can you get them from, how much do they cost and what sort of damage u lookin at to have something like that painted? Alternatively ne1 happen to have a (rear) smacked pearl white Zed with one on [This message has been edited by Clarkey (edited 27-01-2002).]

OK. I got a voucher for £10 off. Which game do I buy on ps2 - devil may cry or max payne?

Hello All, Just had clutch rebuilt etc but need a master clutch cylinder.does the cylinder have to be z32 or can we use one from other makes of Nissan? Also what sort of price am i looking at for a new one from nissan. thanks Pete

Hi, both dipped head lights blew Friday evening, I noticed that the aircon display flickered when I went to Halfords for the new bulbs. A quick check on the US bulliten boards suggested overcharging, my multimeter showed 18.5V across the battery during idle!! So I guess I need a new alternator? or could it just be the voltage regulator? Have I missed something in the diagnosis?, Any recommendations where to buy the parts please? (I have only been a 300zx owner for a year - and the smile on my face has not dissapeared) ------------------ Simon

2 Japanese ARC after market, Japanese Domestic Market blow-off valves. Good condition. A few little marks. You can judge the condition with the photos. These are universal blow off valves. Just need to fit it to your pipe The pipe (flange) is designed for a Twin Turbo Z32 300ZX. The pipes (flanges) are 2" outside diameter on one end and 2 1/2" diameter on the other. Both valves and pipes are identical. Just unscrew and can be mounted to any pipe. Use them on your Twin Turbo or keep one for yourself and have a spare. The ARC Blow-Off Valve protects against compressor surge. This is done by releasing the pressure of the intake side of the turbocharger while stabilizing it, …

where exactly is the meet tomorrow? ive read some are meeting at the shell garage just off junct 23 m6 , is everyone meeting there or are others just going to wherever we are going.

Guys, Who on here is in the legal region! Not plod or highstreet shit, but i need a confideciality agreement diffined 'damm' quick!!! very quick...

Have you guys got the cheques yet??? As account doesn't show your no's yet. Have you got 'em. Or do I sort it. RSVP. harve. ------------------

Hi mate just wondered if you had the plans for ICE shelf as im coing up to GPS tommorow so could pick a copy up? Dont know if you got email i sent hence this post. Thanks for help see you tommorow mate Cheers Jamie

Need to fix a coolant leak on left hand side turbo. One of the two hoses has a small split. I can see them, BUT how the hell do you get in there! Any ideas or advice please, I know ive got big hands compared to the Japanese but please! Tried from top and from underneath, removed everything i can apart from the intake pipes to the turbo. Help [This message has been edited by BigRoy (edited 26-01-2002).]

Wot you think? ------------------ crazyeddie.co.uk

Guys' Found out water pump gone.How much to replace water pump & all the other belts??.... Andy said.... Here's what I'd do - 60k maintanance. Replace the water pump, thermostat, cambelt, two rubber hoses, auxiliary belts etc etc depends how far you want to go really - that way you've covered yourself for the next 60k miles anyway After I found what I found on mine, considering the receipts I had for work that had (not) been done, I would do this anyway ........... Any idea how much I should pay at a garage for this?? Cheers Ken

Folks - Just been quoted £500 for 2 265/35/18 S03's from my local branch of kwack-fit. Does anyone who may have bought these tyres from Micheldever or whatever they are called know how much they are there? Ta ducks. Have a great weekend.. ------------------ Glen :)

Cheers mate for talking me through fitting my boost gauge - only took me about 15 mins to fit it after that Top Geeza!

Stuart, are you aware of the meet at Johnnys tomorrow m8??? Last time you sounded miffed that you'd missed out - this one you surely can't have missed Around 12o'clock at the ginger bread mans ( ) house - address is in the contacts and links section... Hope you can make it but I know you work most weekends... CheerZ, Andy

Hi Mark - just updated your rides with the wheel pictures If you want to put them in a post you need to put:- (img)http://www.300zx.co.uk/rides/mczx/mczx_wheels_001.jpg(/img) and (img)http://www.300zx.co.uk/rides/mczx/mczx_wheels_002.jpg(/img) but replace the round brackets () with square ones [] Any more info required just ask.... CheerZ, Andy