General Discussions - 300ZX Related

who is leaving from the wigan ish area tomorrow and about what time ? i am not sure of exact venue , so i wouldn't mind following somone phillyctt

Just wondering how do you check and adjust it? Cheers Vijay

Hot or cold sometimes the car stumbles at around 200 rpm when I start it then dies. Touching the pedal has no effect. Can take 4 or 5 attempts before it will rev properly to pull away. I have cleamed the 2 coolant sensors on the front of the engine and the TPS but no joy. The coolant sensor must be ok because when I pull the plug off the engine speeds up and the electric fan kicks in. Paul

...a lesbian and a Jacobs cracker??? One's a crack snacker, the other is a snack cracker. RCD

I want to have a front facia installed and painted. Also a few small things like repainting the windshield wipers. Additionally I might have the wheels refinished. If anyone has a wings west or similar front facia they would like to sell I am interested. I would prefer a location within an hour of the M25. Please give me some suggestions. I do not want the best paint in the country, I would prefer nice paint for a good price.

Anyone from here?

I have recently acquired a sorry looking 300zx and have limited time to make a decision about what to do with it. I have posted a notice about it on the for sale board but I am also considering bringing it back to it's former glory. The problem is that I am currently working in Australia and can not undertake such a project myself. Does anyone know someone who does this kind of thing so that I could return in a years time to a beautifully restored Z.

I need a dust/water cover that goes on the back of the main beem headlight as my dear old dad ripped my last one in to two parts! curently one and a half month wait for one from japan!!!(arse)

Does anyone have a link so I can find out what cd changers work with what stereos. Paul.

anyone have some small 300zx.co.uk stickers for sale. Only want little ones to go on the side windows.

Some new kind of flux capacitor maybe?

Right that's it FFS!!! My favourite chair for surfing is Phuket! How has this happened I hear you say? I don't know but when I find out they are toast! OK! Tech! Here is the problem, my chair is a rough old thing...picture a sorta dining room jobby with a high back and side arms for support! Grrrrrrrrrrrrr Sorry, lost it a bit! Anyway, the left hand side has packed up big time, has fallen and no longer supports my left arm on waiting for the forum to accept my valued posts! Most gutted!!! I have investigated and noticed that the screw is of the allen Partridge type and cannot find myself in my current state capable of sorting out! Have tried t…

Hello to all board members from a sunny Tokyo. Still reading the board almost daily. Guess keeps me a bit in touch with the UK, after now almost 2yr in Japan. Out here, I have the fortune of using NISMO for tuning instead of SE, but there are times, where I wish I could just take her on a spin to Maldon!!! Garages out here, are useless. Simple as that. (Oh yes, the black one, on the SE web page, with the extended rear, is mine; drive it now out here). Anyway, question is, Brembo brakes. We've just tried fitting brakes from 'crashed' GTRs. Tried two sets even and had brakes re-sealed, but it just ain't working right. So now looking at a spanking brand new set of Brembo…

Andy, The PTU is fine,everything good.Was it a big job & what sort of damage was done inside the ptu?????(simple explanation) Thanks again Ken

The z lights in the dark are crap everyone else looks to hav brightter lights? I've already cleaned the round lights, Q has anyone put more lights on, in particular right at the bottom were the plastic raps round and splits into two little edges, if so could u tell me what kind of lights to get? The reason is I do a lot of driving wear there's no street lights at all. Seen some headlights that the new x-type jag has CHEERS ROB

i am about to take the path of boost upgrade but need some tec advise, and i dont wanna start a war (lol) my car is uk spec 92 on a k if i us bleed valve's ,apart from the bleed valve's ahat am i going to need parts wise ??(apart from the obvius((bost gauge))?). i dont wanna go down the parth of boost controller yet as funds don't permit! but i am willing to consider an ecu upgrade ,but if i do that what parts would be needed there?? i suppose you can see what i am getting at ( i hope)lol would appricate all tip's and advise good or bad thanks Philly:::

Has anyone got a pair for the TT 1990 jap? need ones that haven't got wacking great holes in them! Latz

pioneer 6" 2 way coaxials. all the plastic panelling for the inside of the boot if any ones interested? Latz

I dunno, let's organise a team building course for some of the gang! We all need to chill out and get drunk/stoned/get the chemistry sets out etc. ROFLMFFFAAAOOO Why don't more of us talk to each other on the dog & bone??? Me and the Macca speak to each other all the time coz we're secret lovers...shhhh, don't tell anyone! ROFL Seriously, it helps to clear some of the tension between members. Either that or let's hire out one of them Fun Pubs for the day, you know the ones, with the boxing ring or Sumo blow-up suits and have a "bash the shite outta yer favourite member!" type meet! LOL Or tag teams! Yeah, that would be good! GPS Northe…

my engine has been stood 20 months in oil which was heavily contaminated with water, during the rebuild ive replaced a con rod(hydro locked) but have found that hydr lifters are keeping valves slightly open.valve seats are good & hydr lifters are drained of all oil & can be compressed easily in fingers.4 valves remain open which shut when cams are removed. darent take a few thou off valve top, any ideas

Can anybody tell me the offsets I need to replace standard wheels and the P.C.D.... Also are there any other manufactures that have the same wheel offsets, pcd's etc... e.g Toyota, VW, Audi????? As I'm looking for some secondhand aftermarket wheels, cheerzzz

i see people talking about boost jets what are they and do i need them when fitting an electronic boost control any advice would be much appreciated mark

Two Irishmen walk into a pet shop. Right away they go over to the bird section. Gerry says to Paddy, "Dat's dem." The clerk comes over and asks if he can help them. "Yeah, we'll take four of dem dere birds in dat cage op dere," says Gerry, "Put dem in a peeper bag." The clerk does and the two guys pay for the birds and leave the shop. They get into Gerry's van and drive until they are high up in the hills and stop at the top of a cliff with a 500-foot drop. "Dis looks loike a grand place, eh?" says Gerry. He then takes two birds out of the bag, places them on his shoulders and jumps off the cliff. Paddy watches as his mate drops off the edge and goes…

Hey folks, Going to see a Z in Nuneaton (near Coventry) tomorrow at a garage called Whittleford motor sports. You can see the car on the autotrader website (it's £6,250 which might help ya find it). Has anyone heard of 'em? Good, Bad, Ugly? Thanks folks, you've saved me from a shite dealer once, so maybe you could help me out again Gonna get a beer now -Stu

anyone here reg L300 TTT