General Discussions - 300ZX Related

im running on 19" wheels, so lots of space to fill. hi-spec do a 360mm kit any thoughts anyone.

When I close the door on my car, the warning light on the dash slowly goes out, I am sure before that this light just went straight out when the door was close. I am trying to trace an electrical fault and just wondered wether I am wrong and it always slowly dimmed, or if this may be something to do with it, anyone? The fault I have is a drain on the battery after being off the road for 9 weeks, also noticed I got a slight shock off her when I got out and the interior light bulb had blown when I got her back. Are these all linked? Any help out there?

Big thanks to you mate :bow: I got the pump fitted last night took the car for a drive this morning and everything looks good. :dance: Looks like I can make japfest now :nana2: Cheers Eddie

Anyone running T-28 BB turbo's with standard injectors? Just wandering what my tuning options are as I can't afford to shell out for bigger injectors just yet. The car already goes fairly well, tubs spool very quickly and it has decent mid range running 10 psi, de-cat powerflow, cone filter and JWT. Think the boost is upped just a touch with one boost jet only. I assume that running 14 psi on my Profec if I get it installed will max out the injectors due to the bigger tubs? Also have an SAFC...some like them and have got good results, others prefer a custom chip. Cheers all :)

Is It common for recirc valves to sieze completely?? As mine have done 85km and are siezed allowing slight boost loss and do not open at all!! :rolleyes:

Does anyone know where to get one of these?

hi chaps, im from the gtir site, so good evening fellow nissan drivers! just a quick question, does anyone know if 300zx seats will fit an r? my mate has a 300 an i fell in love with the seats ! drive safely! daz,

Bright red Z in Droitwich, worcs, on VE day, (may 5th) coming out the town centre, BIG wing on the back, i was in a white, standard Z entering the town with a stupid cheesy grin on me face, well i was driving my Z in the sun shine. :hyper:

What is the problem with the recent apexi avcr units. Should I avoid buying one at the minute or what? cheers, Kersh.

Having to strip these gearboxes is no fun , main casings is easy but then........ when 5 th gear is a b***ard to remove. they are an inteference fit gear on the splines...and by fook it woz tight, using hydraulic pullers they were bending the c clamps around the gear FFS. I woz just about to consider smashing the gear until I found the price of the litlle bugger........................£210 plus vodka wtf?? I like especially the nissan workshop book showing how to use the puller set to JUST remove gear lmfao . twats :hurl: anyway I now have one big jigsaw to rebuild when i've measured all the baulk rings and replaced them as required. moan over :cool: richa…

Who has aftermarket seats here?? what make did u go for and what do u think of em ?? Any pics appreciated too !!

I got my KYB AGX shocks in the end, but they didn't come with any boots (rubber gaitors that go over the shock). Will the standard ones fit ok? Been ringing around all sorts of parts places to try and source these (my current ones are knackered). I would of thought that you'd be able to get ones that fit no probs. But no luck so far. So what's everyone else done? I know a lot have these shocks. Cheers

Im getting my car chipped anyway, but the delimiter has been acting up a while now (steering going heavy, hicas light coming on), but how do i remove the delimiter. Where is it located (it has a small toggle switch on the side of aircon cluster which makes the needle sweep in kph) , and how do i remove it. Any help, please, Thanks.

Hi, someone should be able to help me ;) I'm going to start shipping some big parts around the country from my MG, bonnet, windscreen, engine, gearbox, dash board, wings, couple of doors, rear diff, Who should I use to courier this stuff to people, it obviously can't be to expensive and it needs to be safe in the case of the windscreen, would be great to hear other peoples experiencing with shipping parts from a broken car cha

i live in north east yorkshire and was wondering if any of you can recommend a good garage in this area? (used the local recommended garage..........never again!! :nono: ) thanks guys! :D

Arrrrghhh. Just had Ryan tell me that my big-end was blown because there was way too much oil in it. It also blew out the rear oil seal. Problem is that it had only just been serviced at a main dealer! It was running quite sweetly up until the service. So thanks, Murley Nissan in Warwick, for nothing. I'm not a happy bunny.

Hi guys.. I bought a car which had had a boost upgrade done by S E Nissan. I have just taken it to redline for some work. (Excellent guys there,,,really recommend them) and they have found that S E Nissan have fitted boost jets as expected but also bleed valves!! Now I would have expected one or the other but can anyone explain why they would have done this? I am being advised to go for an AFC from APEXi or similar and have spotted this on ebay, can anyone advise? AFC

Was just wondering if there was supposed to be a cover on the housing of the seatbelt mechanism as if you were looking at it from outside the car. When the windows are down, I can see two holes which are for the mechanism and they look pretty ugly!! :( Was there supposed to be some sort of cover for this, if so, does anyone have some for both driver and passenger side? Cheers Jon

Guys This problem is doing my head in so I am oposting here to see if any of you IT bods have a clue.... Its a XP SP2 install, office XP etc etc etc on a laptop... I want the user to be able to work from home loading her domain profile and then dial in etc etc, as do most users here without a problem.... However.... This laptop wont recongnise the already chached profile under Documents and settings unless its an administrator account... What it does is keep building a new local profile (well, local roaming profile) with the extension .000, then .001 and so on......bloody annoying!!! :headvswal If I log on with the domain admin or loc…

First one I've seen around here in ages !!! Spotted this morning at the traffic lights on the A5117 near Chester, heading toward the M56 junction. Tidy looking dark blue 2+2 import. Not sure if its a member - no stickers in window, lol! I was in the vectra estate next to you going left towards Shell...

HI All. Has anyone tried a set of the blue flame 4 tail pipe cat back systems on e bay as I,m thinking of upgrading mine, hopefully without spending to much hard earned.

My bloody right front indicator has stopped working, wont flash when turnong, wont flash with alarm, yet works fine with hazzard lights.. any ideas please ?

Im looking for a good paintshop in the south east london area. nearest epsom as possible , Can anyone recommend any that if they say 2 weeks it really takes 2 weeks !! any help appreciated.

Just finished work and when out to the car to find a huge puddle of power steering fluid all over the car park. :shock: I have removed the pmp and found out i can pull the spindle and shaft completely out. i am going to be ordering a new one tomorrow is the any thing i need to look out for, i know that the turbo has hicas and has a second part to the pump but are the import and uk models different. The weekend before japfest aswell :cry: :cry: Cheers Eddie

is there any vibrations with these as I'm thinking of having one made , to do away with centre bearing feedback required????