General Discussions - 300ZX Related

Black zed turned round at end of my road- Caversham Park!?

what is the best way of going about it, what kit is best, how low can you go and were is the best place to purchase them from? after seeing my car parked up at Japfest i relised it would look better a little lower!! Cheers Dave ps the car is sat on 18" wheels 10" on the rears and 8.5" on the front

Hi guys Nearly cured my misfire problems but i'm stumped now. Car now only misfires under acceleration. Its like stop start, almost like throwing a switch. It's nearly caught me out on some close overtakes. Any comments gratefully received.

who was it it was a black zed dumping it then parked up. it had a single big bore exhaust with HKS dumpvalves and HKS stickers on it and a high spoiler. it also had i think double pillar guages. with i think was a redish steering wheel. it was around 3-5pm any 1 from here.

Been in and drove 300zx twin turbo fell in love not a petrol head just love the style and rush want one for myself now don't want to be baffled with techinical stuff just want to know what look for got about £3-£5k to spend help

Im think'in of a new set of rims for my Z,wot size is the best im think'in 18's and wot make? I liked the azec's on e'bay at the start of the week are else some sort of spilt rim but just can't make up my mind? :dance: :dance: :dance:

Drove back from work on friday, got stuck on the motorway doing 10mph for 1 hr in stupid hot temperatures. got home opened the bonnet an the sound of somethin boiling from the plenum area. no sound from the rad so i guess it was the oil. no is this normal or really bad. cheers marcus

nice looking silver zed Chichester south shields at 8.00pm Sat 28th May

AT albert embankment SE1 at around 4:50 Black, had big spoiler, and lambo lights think had white alloys and possibly white stiker on the door, not sure though only got a glimps of the ZED. first zed iv'e seen in ages. :dance:

Rite lads!! This is a contiuation of a earlier thread! As u can c from all the threads ive left every where im desperate!! :( So if anyone can help its beers on me :duffer: My leftside camshaft intake pulley is leakin but its not from the front where the spring and o-ring is this area is dry and its not the cam seals these are also dry but the leak is comin from the rear of the pulley itself, the side that faces the head! Any ideas!! :headvswal Is there a way to stop the leak or do i need a new pulley!!(NOT CHEAP) :( Thanks Andy.

OMG. I feel like a twat but HTF do you change the inner (high beam) lamp? I have tried but there just isnt enough space to get my hand in? Is there an easy way. other than taking the engine out :headvswal

Ive got the original imported 110mph dials 1. Are these ones any good...does anyone have them theyre alwasy on ebay 2. Is it JUST a case of adjusting some screws to get the speedo working for the new dials? Or is there something more complicated to do? 3. I think my motor has been derestricted (arent they restrcited to 112mph?)..ive had it well off the bottom of the dials so i dont think ive got to deal with that... I quite fancy the red bulb options as ive done that in my clusters, but still need advice on converting..theres a lot of pposts but nothing decisive? cheers, rob

Guys, I have a UK 91 thats done 126k now, just found out my turbs need replacing so obviously looking a couple of grand there and i was just about to put it in to a bodyshop for a full respray and rust removal etc etc. Now the car is mint inside and i have replaced a fair amount already (see signiture spec). Now i feel im at the point of no return as between the bodywork and turbs this is gonna cost me around 5k, but if i was to sell the motor i prob get FA for it now. Personally i luv the car and if i do these remainding jobs it gonna be in top condition with the majority of parts new and uprated. What i need to know though is what are the engine…

Help i recently installed a new set of clear wing repeaters and they wont work! I blew a fuse at the start by crossing the wires but a new fuse later and the fronts and back are ok but not the wings! The bulbs are ok as well so now im lost. :rolleyes:

Checked the car this mornng and it was definately reading code 34. Reset the ECU and then 55 OK. Boost up from 6 to 10psi. After half a mile back into Safety Boost and code 34. How can I fix this problem. Is it OK to fit a resistor across the Det Sensor, or I'm I risking bigger problems by linking it out. My ECU hasn't been chipped yet and I have fitted Apexi BOV's, Divorced downpipes with decatt and Mongoose catback system and Blitz SUS Induction. I've been told the ECU isn't set up for these mods and that is why the car is running lean and into Safety Boost. I'm also about to fit a Greddy ProfecII Boost Controller. Does this controller link out the Det Sensor …

well this one's got me baffled (well it dont take much) ? When i start the car a warning light comes on ?, on the left hand bottom bank of warning lights (next to the hicas warning light). it says LIGHTS, i have checked my lights including indicators and brake lights and they are all working. This started to happen when i reconnected the battery ?, when connecting the battery i got a larger than normal spark ?, have also checked all the fuses and cant find a blown one? WOTS GOING ON ????? HELP....... :smash:

I have searched the threads and they all seem to have the problem on a cold start... But..... The last couple of days ive noticed that in the hotter weather I have an awfull petrol smell. Is made worse by running my aircon and reving(using throttle) Its makin me head ring :headvswal and feels like im swimming in amel nitrate :mad: It has never reared its head before but today was unbearable. I have checked and tightned the fuel lines (including under the throttle cover) and they all seem fine. I have reved it and have found no leaks. I know most will say a fuel kit from Smithy...may have to do this but....my lines look very good condition and have h…

saw it again today, strosek (not wide arch rear), viper front, black bonnet with bonnet bulge, black headlamp panel, 3 pot leds, tailgate tub. definately had the 300zx.co.uk sticker so whos is it!!?? yaseen

looking at the following http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=72205&item=7976584660&rd=1 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=72205&item=7977275271&rd=1 be buggered if im ppaying 500 odd quid for a kit !!! do the weld on plates (flanges whatever) come with the kits????? not a prob if they dont as ill fabricate them from ally to weld on cheers all

Hi guys, hope you can help here. If you are looking at the Zed from the front, on the far right hand side at the front of the car. After I'd stopped at a shell garage to fill up with Optimax, I let it run for a minute or two, turned her off, filled up, paid, then came back to find shit loads of liquid on the floor under the car. I got down to have a look and it wasn't drippingor anything, only a couple of drops, but it was very worrying. My water temp guage was almost at the bottom, whereas normally it's around a quarter of the way to a third of the way round the dial. Apart from the low boost she was running fine. I didn't know what it was but carried on, and it hasn't d…

dont suppose anyone has a recent pic of stus (SMW1) zed? Preferably showing side skirts. Cheers

my rad is leaking and i'm looking to get a new one. i just want to know what is available,please let me know i need it this weekend thanks

Hi all remember the Guy on Ebay that was selling shoddy bodykits for the 300zx??? Well he's back with a new Ebay seller's Id : http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=72207&item=7977131533&rd=1&tc=photo He's even left himself feedback!! Feedback:http://feedback.ebay.co.uk/ws/eBayISAPI.dll?ViewFeedback&userid=mickyzmotorz :rofl: :rofl: ;)

Hey guys just bought my first zed this month after years of wanting one ( My brother had one untill he got a R33 GTR last year. What a car ..... its a red tt manual targa one with ferrari rear lights, 19s, and rear diffuser, AP racing brake conversion, and full tein coilover suspension etc. It was advertised as having 380BHP but havent quite figured if this is accurate. I know it has a full system with cat replacements, Air filter and its running 14 boost. It was advertised as being stage 2 but the guy said it isnt chipped so im guessing an actuaror or something! It is fast........ really fast but do you guys rekon it can be 380BHP with these mods. Does anyone know what S…

Hi all, Driving around town today and the temp gauge (aftermarket) was reading approx 93c prob ok as wasnt above 30mph at any point and the temp outside being 31c so no cool air flowing. Anyway got on to the dual carriage way and it wouldnt boost more than 5psi??/ Just got home and did an ECU check and this was 55 so all clear there. So I am guessing this was just due to it being so hot that it wasnt boosting properly??? Anyone else had this today or is there something I should be looking at?? It was boosting to 12psi yesterday and the temp gauge usually sits around 80c on a cooler day. Another question is on hot days does anyone elses temp get to the 90's whe…