General Discussions - 300ZX Related

any companies in the south east lonson area that can do wheel refurbing ?? As im just having a respray and kit added ..dont want the alloys letting the side down !! :hyper: :hyper:

Anyone know a performance specialist in London not too expensive and reliable?

Followed you up Croydon road and left at Beckenham Junction ( convoyed until some twat in a fiat pushed in front at the lights.) :D

ok fitted 1 seat in on the weekend took about 5 hrs, this is only quick info as I will take proper installation pics and do a write up when I do the drives seat.. the seat is still electric forwards and back. :hyper: used 4 brackets from B&Q and just mounted each corner onto the original runners its abit fiddly but when youve done one the other will take perhaps 2 hours.. seats are Recaro reps.. full leather recliners and were £453 delivered all and Im organising a group buy with the chap he gets them to you within 2 days the 4 point Sparco harnesses are about £47 a side I mounted these onto the original seat belt bolts and the seat bo…

Hi there guyz & gals. Firstly I'd just like to say hello, this is my first post. :nana2: I'm thinking of trading my Suzuki Bandit1200 in a straight swap deal for my first Zed. The Zed I'm trading for is an H-reg twin turbo targa top Auto (fairlady) and I wanted to know what and where to check on the car for faults, as I love my bike but with second child on the way, i thought it'd be best to try and feed my need for speed on 4 wheels rather than 2, and wouldn't want to trade the Bandit for a pile of kaka. cheers in advance for any help given Bandit... Out...

as above :tongue:

1 gunmetal grey stapleford/sandiacre around 11pm 12/7/5 1 red ilkeston/stanton around 7.15 13/7/5 1 black ilkeston around 7.20 13/7/5 waved at you all !

driving out of Hecky towards dewsbury at 8am this morning, noticed you too late to honk or wave lol Yas

j spec - H707 *** zooming past the wembley complex bout half 7 last night?

anyone know where I can get these from ? I got 3 from a local motor factor (for over a fiver :shock: ) but the actual glass bulb size was too big to fit back into the light lens. Cheers Paul

Could you guys please advise on the best management systems there are for the 300zx? I'm planning to use X2 GT2530 blowers, 740cc injectors, and a single twin in/outlet FMIC and 3" bore pipe work and exhaust system (where 3" will fit and as big as poss else where), I'm looking for a minimum 600HP I want to use a standalone management system, the Apexi Power FC would have been perfect for me but it apears that you can't get 1 for the 300zx :headvswal (unless anyone knows any different) so could you guys please give me examples of systems that are similar to that. Hard wiring systems like the Link ECU in not going to be a problem. I have seen the Link and Motec…

Hi people..Im new to zeds having just bought a 90 n/a that has a few good points and a few bad as I have discovered..Car has been sitting for 8 months..Does anyone know about the brakes? The lines are very rusty and the brakes do not work as well as they should..the pads and discs are fine..no leaks from cylinders or lines..I just thought that 4 wheels disc brakes would work better..do your zeds brakes work fine in a standard form?? Also the power steering is leaking from somewhere and it makes whining noises as I turn the steering wheel...Is this a major problem? The steering is hard then it starts working agin sometimes..does anyone know a place that is Zed friendly t…

Hi Peeps can anyone tell me the difference between the TT and NA flywheels as i thought they where the same. Thanks. :confused:

Anyone heard of a Recaro special? On my rear light cluster it says 'recaro special' this isn't a sticker seems to be inside the plastic. I also have recaro seats, however I suspect they are not from the Nissan factory as they do not plug in to the seatbelt warning light connectors. Could just be where a sticker once lived and over the years it's faded the plastic and the sticker was removed leaving an imprint??? Anyone. PS. Having recaro's in 300 is fantastic.

Hi Guys Still in the quest to correct my 90 import TT's dodgy (sometimes) idle, i have found something that seems to cure it (apart from turning on the air con!). Ive done the usual throttle body clean etc etc, but still no joy? In the engine bay, by the battery there is a small black box (25mm x 25mm approx). It is screwed verticaly to the cars inner wing. It has connected a couple of small hoses, mainly going to the intake/plenum system and a electrical connector. If I disconnect one of the hoses (the one leading to the plenum), the car idles perfectly? What is this part, what does it do and is it needed? Is this a common problem? Thanks in advance …

right then need some help my 300 is a non turbo jap import.ok then what i need to no is where and who can get her chiped or remaped.how much more will it give me and how much.what sort of air fillter shall i get and who is the best to get it from thanks a lot

Any idea why my turbo gauge is sitting only just under the halfway point when idleing and driving normally? Its a uk car and when I bought it I was told that it should sit there but now I know it shouldn't and should be on -14 psi. Is it a turbo problem or could it be something else? Cheers GLENN

I only live about 10 miles from where I work (yeah, yeah, I know I should walk, cycle, bus etc!) so consequently I do very few miles a year. So far this year I've racked up only 2500. Would a 300ZX be suitable/reliable enough to use on a daily basis for work, plus the occasional weekend excursion? Or does a 10 year old supercar need TLC to keep it in good working order? Thanks in advance for your advice!

This is something which very rarely happens but it happens enough to piss me off. Every now and again my zed goes dead. I'll be driving along and when i press the accelerator nothing happens. The car is still running but it just doesnt rev. I'll come of the accelerator and when i press it again its fine. On the way home from PPS however, this happened and the engine light came on. The car seemed to be missing. I pulled up at the side of the road, turned it off, waited a second or 2 and turned it back on again. Everything was fine after that. I did noticed when this happened that the rev counter bounced up and down erratically. Any ideas? Cheers Scott

Ok, we can maybe get something printed on the back of these so we can use them afterwards. It has to be simple though. I was thinking of the above with http://www.300zx.co.uk in a nice modern type face underneath. Can someone knock this up and the correct size for a circular tax disc? I have no software on work computer. And then attach here and also send to me at twopipes300@hotmail.com And we have to be quick!

My zed has a bad vibration from the front at around 75mph. Its perfectly smooth up to 70 and fine and dandy after 80. When i brake at around 75 the vibration is terrible. I thought it might have been warped discs but if i slam on the anchors at any speed above/below that, its as smooth as you like. Any ideas whats causing it? My wheels have just been balanced. The guy at my mates work said he couldnt do the 4 wheel lase allignment because my bumper was too low. :confused: Could dodgy front tyres cause this? I just have a temporary set on just now which were lying around my mates gatrage. Thanks in advance guys Scott

Anyone know where in London i can get a battery as Halfords told me it's 3-4 days to special order one?????

anyone any ideas I have a flapping/clicking noise on every rotation ??? checked wheel and surrounding area nothing there? chris :D

Hello Chaps, Nice to meet you all - This is my first post as a newbie 93 Jap SWB owner - I`m desperately keen to get stuck into the whole Z car scene - the 300zx has been my favourite car since i was a kid and ive only just been able to afford one at the tender age of 27! Im keen to subscribe to the club but have only found a link to Paypal - is this the only way or can i send a cheque?? my beloved car is currently parked up under Phil's care at C&S Woods as i am trying to source a new bumper to spruce things up a bit at the front end. I quite like the scarab bumper but will probably get a 99 spec front end as it is easier to fit and will fare better if…

Hi all, I find myself in the enviable position to spend some hard-earned on my Zed :hyper: . I've already ordered some nice 18" wheels, and since this is putting the insurance up anyway I thought I might as well go the whole hog (or at least start some mods). Since my stock exhaust has developed a small blow on both sides (so I can justify a new one to 'er indoors) I NEED to replace it ( :dance: ). Consensus seems to be Mongoose or Blue Flame (keep thinking Blue Cow - that's what kids do to you!). Where can I get these on the cheap!!! Anyone have any other recommendations? Not wanting to knacker good tubs it will have to be Cat-back. I might as well so…