General Discussions - 300ZX Related

AAARRRGGGGHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!! why the hell cant i get the damn things posted......(rant over :mad: ) when i try to put on a pic it says its too big. so after help from pk1, which i appreciate by the way, i go to edit the pic etc so that the picture size is less than the 97.7kb that it can be, so i dont think thats the prob. i think its too big in the pixel region, as the forum says nowt bigger than 100x100 i think. if anyone is able to post an "idiots guide to posting pictures", guess who would be interested in seeing it.................ME, COS IM AN IDIOT WHEN IT COMES TO COMPUTERS!!!!!!!!! :slap: (rant over again!!). thanks in adva…

Im in the middle of fitting indiglo dials. so far so good apart from the needles. do these just pull off - I dont wanna break them????? Ive pulled a bit but when the temp needle came out it came out with the pin attached still? Ive pushed it back in - is this is - all I have to do is pull on needles?? ALSO . . . . Do i remove the main bulbs when fitting indiglo dials?? Do I put the indiglo dial leads through the holes where the bulbs used to be? Thanks

Hi, Would a 2+2 roller blind fit my 2 seater Zed?

i've just noticed whilst checking oil etc in the z that my brake fluid has dropped again and the piant around the base of the brake master cylinder and bottom of the servo is lifting is it possible my brake master cylinder is f**ked? i will say brakes seem to be working ok at the mo but obviously dont want them failing

Hi my jap import twin turbo, seems to skip to the left when going over bumps in the road and living in the pot hole capital of the world(sheffield) this is quite often. its been doing this for over a year know but has got worse in the past three months, and has infact passed 2 MOTs (at a suposedly strict garage) the last one only a month ago, i read an article in japenese performance magazine saying that knackered propshafed bearings cuase the car to skip, could this be the problem? how big a job is this, and any ideas of cost as the birth of a second child is threatening to come between me and my car and i cant be having that :D :D :( :( (.....if my wifes reading this…

Has anyone heard from Chris @ Greddy in the last few days? Doesn't seem to be replying to e-mails or phone calls? Anyone hears from him can they let me know areid@empiredesign.co.uk Thank you guys

I know itll have to be changed more often but will it harm anything? Ta

The Green, yellow or white? or do i need to do something different everytime I locate the boss onto the (butchered) hicas/horn black plastic round part (which has 3 contacts - the green/yellow/white wires) - the horn goes off. Ive tried shorting all 3 together (like the boss is fitted) and it doesnt go off??????????? I have tried putting insulating tape in order over each one and if I cover the yellow contact the boss goes on without horn going of.. However - the horn doesnt work if i try and use it then ??? Any ideas please.

Does anyone know who has front shocks on the shelf, either OE or uprated? Car's just failed MOT on a weepy shock, hardly suprising as I suspect that they are the originals and the car has done 97K miles. :D Failing that, anyone got a nearside s/h shock that they want to get rid of, that way I can get the car through it's MOT and I can wait for the ones I want to come in from Aus'? Any suggestions appreciated. Tim

Dont ask me... changed the oil, coolant, shoved a nice new oil cooler on the front, HID lights and now I have electrical problems! And the fact that the car is smoking like a guy on weed. Anyway, anyone got any ideas? Try to start the car and all my electrics cut out. Got power if I dont start the car and the electrics works fine, if a bit slow. Did get a jump start but that never solved anything on top of the fact that my bloody wipers keeps coming on everytime I start the car. So if anyone can help cheers! :hyper:

hi have just bought a z32TT uk 1990 spec, manual!:nana2: But i seem to have problem with the original stereo and cd player, they dont turn on. All i have is the little red LED code light flashing but im unable to put a code in because there just doesn't seem to be any power, the screen dont light up. Although when i put the headlights on, the dash lights including the lumination lights on the stereo do come on?? can anyone help, cheers guys regards G

Chuffed! Got a complete set of r34 calipers, discs and pads today. Only problem is I havn't got the mounting bolts for the front and was hoping to fit them before the UJCC track day on Monday. Does anyone relatively near the Bristol area have the four bolts or know where I can get them? Dave :hyper: :hyper: ps - to the people who are looking for the same, Lamb on the skyline forum is selling some. pm me and I'll give you the low down. Was only offering the front, and wouldn't budge from £800. They are what look like very good nick though and are v-spec r34.

right i know thanks to pk1 that i need to go to the manage attachments part, im with it up till there. but then when i select a pic from my pc it says image is too large, so how do i make them not too large??? :confused: please bear with me i dont know how to use a computer :slap: :o

well after many hours ive managed to complete it. :D :nana2: so thanks for the advice given on the site! ;) it cost me £20.00 for 4 meters of red leatherette and about £15.00 for the glue (most of it ended up on me hands). i would put up some pics of what i done but i dont know how to?? :confused:

guys im confused why so many people appear to disable the hicas on 300zx / skylines, i thought the idea was that the HICAS helped you with the handleing ? Am i to take it that even if the HICAS is in a well maintainned condition that its still not that great?

hi folks , does anyone on here , have a cambelt tensioner for sale for my H reg tt, jap import , auto, mines not working, thanks. :bow:

Ok guy's put your heads together for this if you would please. Sorted the battery problem, (see last post) On removing the battery i found an air pipe which come's from a tee peice on the left hand side of the motor, tucked down behind the battery which goe's no-where, it appear's to have a small metal fitting in the end, kinda like a boost jet or a bust off alloy nozzle and i can't for the life of me see where it come's from. Any idea's?? Also, i know the boost guage in the dash is inaccurate, but should it be showing 14 psi on boost?? Could it be this far out or doe's it sound like boost jet's are already in there??

Can anyone point me to the cheapest place to get the above? z-centre seem the cheapest at £290 for the bumper and £46 for the lights (+VAT), but luke is off on holiday for a week, so I'd have to wait a while to get them (and the car's in the garage). petrolheadsnw are £420 delivered but I don't think the lights are included. Any help much appreciated. Cheers :)

Anyone know a website where you could try different rims on different cars? Like choosing a car (preferably 300zx), and then putting different rims on it. I used to know two web pages where you could do this, but one of them has stopped with this service, and I cant remember the Internet address to the second one :( Tell me if you don't understand what I mean and I try to explain better :p

hi i have a 300zx but its a none turbo how do i no if i have hicas fitted is there a light to tell me? or some thing i can look for

My Jap 2+2 300ZX TT has a knackered left side rear break disk.. i gather i need to change both rear disks... Im not too fussed about getting anything too fancy - i just want to keep the cost down as im a bit skint - any ideas where i can get a set? I rang a few places and i either got crazy quotes or they said they cant get them for imports... :headvswal Help anyone... Cheers Z- Man

Anyone know how easy it is to remove the dashboard dial pod - I have a new pod with a set of indiglo dials to fit already on so am just going to note mileage and swap entire pod over.

Anyone know the thread size, I belive it's M18, can anyone confim ? CheerZ Paul

Well the car is booked into the MOT station on Saturday morning :eek: , I was just wondering what are the most common things the zx fails on (not that I expect a fail - obviously :nelson: ).

where in Reading/ Thames Valley can I get some de-cats made up?