General Discussions - 300ZX Related

Z with fresh looking blue paintwork heading towards shields from the Tyne tunel Sat 13th 2:15 i was in blue 200sx going the other way

help !!!! right ive had a bad weekend so fr, first of all my carlton decided to remove its own powersteering belt and in the prcess remove the fan belt and wreck the fan so that on car down. then my zx had an electrical short which i think has tken out the brake light fuse. I desperatly need a yellow fuse from under the bonnet ever to buy or borrow for a week as i cant get to nissan till next weekend. can anybody help

Right found the problem with the rear lights but now brake lights dont light up, anybody know where the fuse for these is?

Guys, anyone have a rough idea of what a new windscreen costs? Dan.

Received my illuminated kick plates today (thanks Paul and Vijay) but because my car is a slicktop im not sure how to wire it up. I dont think i can thread the wires to the interior light, is there anywhere else i can connect it up? Im not good with electronics so will need an idiots guide to fit it :slap: Yas

I just can't seem to get it below £1100:cry: I'm 25, 4yr NCB, licence held 5yr+, N/A, import, 1990, auto.

just thought i would post up some pics of my attempt to retrim the interior. its not perfect, theres a couple of ripples etc, but for £20.00 plus some glue i think its a good cheap mod! biggest prob i had was with the evo stik glue. i used what was mentioned by others who had done this, but for some reason it melted/reacted with the original glue and thus gave me some hassle. but apart from that it went ok :D (pics are from my mobile so i apologise for the quality)

Can anybody recommend a good outdoor car cover to fit a SWB Z32. It's my birthday and I thought I might blag one from the MRS! I've had cheep ones for other vehicles in the past and they do more damage than good. I don't want my rear spoiler getting ruined etc...

Please help! My SWB '91' Z32 (85K km) autobox has lost 3rd and overdrive. It drives perfectly otherwise on the first two gears. It happened yesterday when I must admit I did open her up! Having had to slow, due to traffic from around 150 to 85-90, I then flicked out of overdrive to help the braking, on reacceleration there was an audible 'pop' and then no drive?? I coasted back to work and have carried out the diagnostic check, which revealed no faults. There is no fluid loss and the fluid appears to be clean. Any ideas?? Please tell me its not costly!

Does the Grounding Kit really work as stated on http://www.groundingkits.co.uk/? I mean, how could you by giving the car better grounding get more horsepower? I could think that indirectly it could maybe increase that a very little bit by giving more stable power supply. How big effect does these have on the 300zx TT? Don’t think of me as a fool if this is obvious, I’m just curious and I’ve never heard of these before :)

Went to go out in my car switched the lights on and the fuse blew. replaced the fuse and investigated, noticed i had no back lights. the live wire to the drivers side light was also getting very hot. i disconnected this and the passenger rear lights then came on. i guess there is a short somehwere. any idea's

Driving down Chislehurst road at 6:30 this evening - from the Leesons Hill roundabout.

Hi Marcus (mrogers?). Good to meet you there mate. I'd just been stuck in a traffic jam from hell. Took at least an hour to go the 3 miles from yate! Then when I saw you ,me and the missus were trying to work out where we were going! so we were all over the road. Dave

1st in Cosham parked on drive H reg grey 2nd red twin round lights and high level spoiler at back parked on drive in Drayton. Anyone on here?

i have just got a quick shift gear leaver are they any good and are they hard to fit

When installing the above gauges do you just feed the wires from the back of the original clocks or is there another feed for them? Thanks in antisipation. :hyper:

do any of you no much about fse power boost valves is it worth putting one on my car its a 1991 na and also my mate has one off his civic says it will go on my car is this right

!st one was a dark red one in the car park of sainsbury's emersons green 2nd one was monaghanroyal who i chased down in my xantia to say hi lol

i get a slight vibration from about 40-60mph, it feels like you are in the wrong gear but your not if u know what i mean doing my head in HELP!!! lol any ideas?

AAARRRGGGGHHHHHHHHHH!!!!!!!!!!!!!!!!!!!!! why the hell cant i get the damn things posted......(rant over :mad: ) when i try to put on a pic it says its too big. so after help from pk1, which i appreciate by the way, i go to edit the pic etc so that the picture size is less than the 97.7kb that it can be, so i dont think thats the prob. i think its too big in the pixel region, as the forum says nowt bigger than 100x100 i think. if anyone is able to post an "idiots guide to posting pictures", guess who would be interested in seeing it.................ME, COS IM AN IDIOT WHEN IT COMES TO COMPUTERS!!!!!!!!! :slap: (rant over again!!). thanks in adva…

Im in the middle of fitting indiglo dials. so far so good apart from the needles. do these just pull off - I dont wanna break them????? Ive pulled a bit but when the temp needle came out it came out with the pin attached still? Ive pushed it back in - is this is - all I have to do is pull on needles?? ALSO . . . . Do i remove the main bulbs when fitting indiglo dials?? Do I put the indiglo dial leads through the holes where the bulbs used to be? Thanks

Hi, Would a 2+2 roller blind fit my 2 seater Zed?

i've just noticed whilst checking oil etc in the z that my brake fluid has dropped again and the piant around the base of the brake master cylinder and bottom of the servo is lifting is it possible my brake master cylinder is f**ked? i will say brakes seem to be working ok at the mo but obviously dont want them failing

Hi my jap import twin turbo, seems to skip to the left when going over bumps in the road and living in the pot hole capital of the world(sheffield) this is quite often. its been doing this for over a year know but has got worse in the past three months, and has infact passed 2 MOTs (at a suposedly strict garage) the last one only a month ago, i read an article in japenese performance magazine saying that knackered propshafed bearings cuase the car to skip, could this be the problem? how big a job is this, and any ideas of cost as the birth of a second child is threatening to come between me and my car and i cant be having that :D :D :( :( (.....if my wifes reading this…

Has anyone heard from Chris @ Greddy in the last few days? Doesn't seem to be replying to e-mails or phone calls? Anyone hears from him can they let me know areid@empiredesign.co.uk Thank you guys