General Discussions - 300ZX Related

All i saw was a read zed, side on, with black alloys that had red rims. Anyone here?. This is 3 zeds now in dublin in past week. And ill have another on wednesday :hyper: :hyper: ..they getting popoular.. :rant:

can i do the heater matrix removal on mine by following the same procedure as shown in this info? http://www.aus300zx.com/tech/heater/heatercore.htm or do i need to remove the clutch pedal also? as its jap. i dont want to take the dash off unless i have to.

Whoever you are you seem to be there often these days. Come on who are you :D

Hi, has anyone ever posted a leather interior? (front + rear seats only) If so, can you remember what the weight of it was? I need to give the courier some idea on weight. Cheers, Shaun

as above when applying the brake to slow down i can hear tap tap tap tap..! and sometimes feel it throgh the steering wheel too. have checked all the whell nust and they are all present and tight as a nuns arse. any ideas?

Runnig problem when cold this time. Had it about 4 or 5 times now, car idles fine no problem but when tring to drive I get the odd splutter and cough but no backfire out the zorsts. Only does it when started in the morning when cold i.e. left overnight. Only does it for around 2 - 3 minutes. Any ideas :confused: CheerZ Paul

My new ZX i got last friday has the turning circle of a super tanker as 245 tyres are on the front as well. And it has been lowered. When i am turning around or making a sharp turn the wheels hit the wheel arch. This really sends a shiver down my spine. I think i might get the ZX unlowered which would help a bit. What is yow thoughts on this? :headvswal

Had a problem with the Zed yesterday. Started it up, it would rev up to about 1500rpm then drop right down momentarily to below 500rpm (normally cutting out). It was also cutting out when you reach the bite point to move off, you'd have to give it loads of throttle to get the car moving. Anyone have ideas to why it might be doing this? It starts up fine on the first turn of the key but then it does this... Cheers.

Would a car immobiliser have a problem with a turbo timer letting the engine stay on and idle? I think it would.

just looking on demontweeks at these as mite get round to plumbing in my gauge. have the autometer ultra lite gauge and sandwhich plate already fitted, the question is how long a pipeline :confused: they come in 4,6,10 an 15ft I was thinkin 6 will this be long enough :confused: also what connections :confused: on the pipelines 1 npt/1 bsp flat 1bsp tap/ 1bsp flat 1 npt/1 bsp tap 2 bsp flat 2 bsp tap cheers

...just wired up the fog light wrongly (it was working before I dismantled it) and now I've no rear lights and the headlights are on main beam only. I've changed a blown 10amp fuse in footwell and checked everything else and it looks ok. Any ideas would be most welcome. cheerz Jack

i saw a nice convertible white zed pulling out of amersham hospital on friday 11th ... was it you?? do you know of many other Zeds in amersham or chesham?? Z Man

A white zed at the side of the esso garage in santry just next to kart city. Just caught a glimpse of a white zed sitting down the side when driving past and my mate wouldnt go back so i could have a look. Ah well anyone on here :headvswal

Hi All. Just taken out the Nissan CD player & it has left this hole (see photo) I went to the car audio center & they do plastic box that looks like it was made for about 50p.....so that aint going in. What can I put in the hole that will look good ? PS & don't say my D***......... :D

Spotted a blue z in wantage yesterday, heading towards grove. Anyone on here...?

The white SWB outside City Police living quarters.

stopped next to you at the great cambridge lights in Cheshunt, anyone on hear.

Justed found out that my tubs are shoot :( ,I need a rough price for a set of recon tubs

was just gonna go fit the Brembo GTR34 calipers , discs and pads on the zed then thought, Will the standard zed bolts fit as i only got the calipers and no bolts or anything with them or will i need to buy them ?? Also anything else i need b4 i rip off the old ones?? also where can i get em from in that case and any idea on price ?

Hi All, My car is idling at about 1300rpm, i've set the TPS, removed/cleaned/refited the idle valve, if i remove the yellow connector off the idle valve it has no effect, can i assume it is knackered. Thanks Baz

hi guys can anyone post a pic indicating where the fuel lines are in the engine bay pls, im getting a smell of petrol from time to time and the advice ive been given is to check the tightness of the lines. cheers

As my stock piling of parts continues for when my zed is back on the road I wondered where I could get a strosek wide kit from? Cheers!

Can anyone please help me ? I need to order a replacement nose panel, as mine is on the M5 in a million bits. Iv'e found the site, and the panel i had, but i cant speal a fooking word of japanease the panel is 25,200 yen, which i convert to about £125 how the hell do i ask how much shipping is and how do i order it ? or even better, anyone know a UK site i can order abflug ? cheers for any help you can offer

..but it only seems to happen when I put the lights on!!! I am guessing that this is my slaternator belt slipping cos when I turn the light off,,,the screaming stops!! Or is it the alternator instead??? :(

Need to do an oil and filter change on my Z, what would you guys recommend as the best oil to use??????