General Discussions - 300ZX Related

any help appreciated,z32 92 import;intermittent fault. o.k for few days then bad for a few.over idles hot/cold to about 2000rpm.uses more juice than normal also.when this happens i get a loud clicking/ticking from a small unit under bonnet-drivers side by brake servo.this unit has a few air pipes to/from it plus electrical connection.1 of the pipes ends up at another unit bolted to engine side(also drivers side). as i say its not all the time but when it plays up there is a noticable difference in how she runs,and most annoying to say the least. she is a 1992 z32 import non-turbo,love the car so could do with any ideas on what could cause this. thanks,,chumley. :…

Ive deleted my only copy of the datascan software - any chance someone could email it to me please ?? speedfreaks@aol.com or msn cheesydog89@hotmail.com thanks in advance - cant believe i was stupid enough to lose it :wack:

Turning out of woodend Avenue earlier today and giving it a bit of sideways action down the road in the dry. Sounded great.

How would four of these be on my Zed (import, NA)? I know lots of people might say 225 isn't big enough but it's what Nissan put on in the first place and wider tyres / wheels cost more and I'm tight! Would they be ok? Cheers!

Hi Saw a non stock Silver 300zx on a N/95/96 plate in commercial rd southampton last night? You were at the lights near London road i was the one in the White T reg vectra staring at you while turning into bedford place :tongue: Was it anyone from this forum?

Ive noticed Im losing petrol through or around the filler cap. It seems to be when I drive car hard, I stop and I have a patch of petrol around the cap on the rear arch. Is the cap meant to have a rubber seal on it? It turns and locks but can still be moved out by a couple of mm. Or does it sound like a breather problem? Cheers

Has anyone tacken of outer sills for replacement and if so what shold i suspect,

I need a part number for these urgently if anyone knows it or if anyone knows exactly what i need to ask for. ASAP Please

Hi Everybody Does anyone have the telephone number for z world as i need to phone them and have lost the web address

these buggers (on the left of the pic) have been a pain since i got the car, the 'O'-rings were leaking and the tyres have had a slow puncture. so seeing as the cars off the road, i took the wheels to get the tyres off them so i could replace the seals, well, the boy was a bit handy when breaking the bead off and ended up snapping the tyre valve. so i went to a few motorbike shops and found that theyre a pain in the arse to get hold of, but i saw that they had a type using the 'standard' uk type like a rubber bung with a chrome valve (as seen right on pic) so seeing as these are readily available i thought i would ream out the valve hole in the wheels to take th…

Hi again - i know this is my like my zillionth post on asking about Zed's but .. Im going to see a UK Spec Zed tomorrow (only as it happens to be a UK spec - also looking at Imports too) and where the usual Digital C/Control is there's just a switch for the heater controls by the look of it... Did UK cars not come with Climate Control ? Thanks Ed

Swapped my leather seats into my swb. Looks good apart from they are pretty badly cracked from wear. What do you guys use to try and disguise the white crack marks. I was gonna try some boot polish but fear it will come off all over the missuses clothes :)

Outside of C&S Tyresabout 4.30 - 5pm ish

spotted grey zed in industrial estate in bellshill glasgow this aft, near man/erf trucks. anybody from here??

The fluid goes down every now and then but always seemed worse after very cold weather. Anyway the other day I have a puddle of fluid on the floor and zero pedal resistance......I have a feeling one of the hard lines on the drivers side may have split. So my question is - Is this hard line easy to replace or is it a pain and gonna cost lots of dosh to get it sorted. I'm hoping that at either end of this hard pipe it goes to a rubber pipe so its not too painful to replace...But knowing Nissan, these things run all the way to the ABS unit.....like spaghetti junction plumbing! Is taking the brake line guard off easy enough - I havent got underneath to have a prop…

Bought some second hand Blitz bov's, fitted on the turbo pipesunder the bonnet but now the engine keeps stalling after I brake. How can I test they are working right and not leaking and how are you supposed to set them up so they both copme on together at same time? Any ideas, Thanks, Paul.

how hard is it to change the light bulb for the front lights,where can i get the bulb for the front lights? whats the wattage?

I know that my front callipers need swapping for T/T ones as mine will only except 26mm discs but I was told the rears are all the same (30mm discs T/T & N/A) but I looked at my rear discs today and they appear to be 26mm as well??????? even though I could not measure them properly due to a then metal protecter thing which is over them. So will I need front and rear T/T Calipers if I am going with 30mm discs all round????? Cheers in advance :duffer:

quite curious about this whole thing. As we all know than when a car is written off after an accident the insurance company generally pays out the book price. Now I know some of you have stated an agreed value. Now some of the zed's on here would need a very high agreed value to recoup a fair bit of your outlay. I myself will have spend the guts of 20k in the end, so was just wondering about all the high power, high money zeds on here and your insurance.... Mark

These wheels Says 95> ??? Thanks. If not, for future reference can you tell me what pitch etc I need so I dont have to keep asking!!

Hi guys Iv taken my headlights apart and my god i didnt realise how hard that would be but its done now! Just wanted to know what i do about this greyish glue kinda stuff shown in the pic I really wanna remove most of it and replace it with new stuff but dont know what it is........anyone got any ideas about what needs to be done Also im worried about condensation when i put them back together again.........can anything be done to prevent this and how Cheers for any help Fas

Hi Guys I need to glue some plastics together for some mods on my Zed and i dont have no idea on what type of glue to use The glue has to be able to withstand high temperatures and be as strong as fvck but also be of a clear nature so that its not really visible! Please dont come back and say superglue as that stuff is crap Can anyone help Fas

Hi guys Has anyone changed their original auto shifter and had a problem getting thier ignition key out afterward as the steering wheel wont lock and the release button is not allowing it to release. Thanks Konrad

In thinking of changing me z32 tt auto(import) auto box to a manual, ive sourced a manual box, how much trouble is the job and what other things do i need? Im presuming manual pedal box,maybe differnent prop?ecu??

ok i have just done my 99spec light conversion, and have f****d my whole lights up. :headvswal :headvswal the lensz are in but the lights do not go back into place fully therefore look shit on the car and are sticking out slightly! :mad: :mad: What am i to do? Do i have to buy new lights? heeeeeeeelp!!!!!!!!!!