General Discussions - 300ZX Related

not another 1 I hear every1 saying :rofl: just cant get the bloody thing working activated it ok got all the drivers installed windowas wizard did it its self downloaded the 1 off blatz. connected plug to the grey 1 by bonnet release in drivers footwell, connected to laptop via usb started up datascan clicked on connect said invalid port so read previous threads on how to change ports an could find what port so just tried 1 - 9 an 3 was the only 1 that didnt give a invalid port box. so tried 3 an wont connect :headvswal only data reply, log analyser, an nds activation boxs are highlighted(already activated) any help aprecited g…

Got the Datascan cable and software yesterday, set up and working OK, all dials displaying on the main data screen fine, then suddenly the screen stops working. Trying again today I cannot get the multiple display to work, see attached screen shot as this is all I get. The dashboard works OK and I can select different reading and they display OK so I am getting info from the ECU, but this main screen refuses to budge. I've removed and re-installed the software and no change, has anyone had a similar problem or have any idea what might be going on? Cheers, Gaz .

I have found a pair of R33 GTS-t 4 pots that another forum user wants to sell.... They're going on a Z32 N/A, along with 322mm dia discs (30mm thick). Will these callipers be big enough for the discs?? I don't want spend money and end up having fitting problems etc .. I am running 19 inch rims so space should not be a problem. Any advice regarding this will be greatfully received :bow:

Just took the car out after doing the rear light conversion to get sum bulbs, reverse back onto my drive, started to replace the bulbs and i could hear a real gushing noise under the car!!!!!! she decided to have a P"ss!!!!!!!!! :confused: Its been dry today really and half parkedin the garage WHATS GOING ON :confused: ANYONE HELP!! is it holding water somewhere and ive disturbed a blockage!!!!

Heading towards Balloon Woods around 7.15 this morning! ;)

Grey zed goin past supertex in leyland 430 ish Home time!!! wahooo Was in my MR2 Tubby on supertex car park Started working there today full time. Nice looking zed....

about 12.30pm today in Cheltenham, had a large rear spoiler.

Any one know of a good 7" touch screan at a realistic price. To run my laptop from as a car install. Don't want side and pop up type. Want a static mounted. So I can run my itunes, everything on my laptop and a diagnostic program.

any ideas have a clip with two small holes spring type to fit into lip of bovs on the flange to keep in place..i have used the proper pliers but the dont seem to bend in enough to fit.... :headvswal :headvswal :headvswal

Hi fellas Anyone know if the rear bearings are adjustable or are they just cased bearings? Nissan say they are part of the hub assembly, not that I would buy them from Nissan, but its a good starting point to measure against. Cheers Dave

Looking for someone who can test fit a cosmetic engine product for me, it's quite a simple part and should take 5mins or so, however the instructions would need to be scanned and translated to English, ideally suit someone who likes a bit of bling. I can't do it myself as where this goes, I have removed some parts and it wouldn't fit correctly !! cheers smithy

H373*** Black Zed looked standard spec with n/s damage to wing ouch! Centenary way 8.20 am this morning.

Would someone be able to tell me if the tailgate skin that Luke and 300zxstyling sell covers the hole left from the wiper? My tailgate is rusty around the wiper arm and I want to do away with the whole lot. Thanks Baz :bow:

as above..... anyone know this?

Hi all - need to ask a couple of questions..if its dry this weekend -which i know it wont be but we live in hope..i was going to clean the throttle bodies...now...where are they!?! is the the two Outer pipes going into the engine, do i just take the jubilee clips off and remove the rubber piping? Also, was thinking about air flow to the induction kit - anyone rekon its worth getting say two cold air feeds and having them bent round inside the front bumber either side at the bottom up to the apexi induction kit... thanks for any help..

I've got a 1991 2+2 TT, when I change from 3rd to 4th over 3500rpm it seems to crunch a bit going into 4th, the guy I bought it from has changed the clutch recently....does anyone know what this could be?? All other changes are smooth as silk, even 3rd to 4th a low revs?

hi zmates, can someone tell me where i can get a bottle of water wetter and how much, i was looking at a website a few days ago explaining about how this stuff works, and now i cant find it, cant anyone tell me. thanks big mo

Saw a white convertible parked in Battersea fire station car park. saw it at 5:40.

Anyone got the Toe in/Toe out settings for a UK TT? Want to sort my alignment out this weekend. Thanks Jay

Some little B@574RD has pull one of the covers of the headlight washer on the front bumper. Does anybody know where I can get one, or has anybody got a spare one? Thanks Matt

Last night (17th may) in Ipswich - saw you from the pub, I think it 's called The Salutation???

Traders, This is the last call for you to consider if you want to add a flyer to the Membership Pack documentation. The docummentation will be heading off to the printers within the next week, so we haven't got much time left. I am ordering 500 sets for the club, however, will only be using 300ish immediately to satisfy the members details I've managed to collect so far. Cybernet & Shrimpy have already forwarded their fliers to me (thanks lads). They have halved an A4 sheet between them and have requested I get them a quote from the printers I'm using. If you didn't want to the expence of 500 sheets, you could just get the initial 300 done and anothe…

OK I've istalled the software and registered but when I plug in the cable the hardware wizard is looking for software for the cable. What do I do.

hi im new on this site could u please help me ,,im thinking of buying a 300zx twin turbo just need some details whats a twin turbo bhp,top speed ,0-60 {anything like that} what can u get bhp to with a few mods{not to expensive} whats good a bout them,whats bad points about them any help will do cant decide if i should buy a supra or 300zx

hi guys just signed up the night. im not an owner just yet but im looking into it currently im drivin a mk6 rs2000 but its gettin a tad boring now. iv always wanted the 300zx twin turbo so nows the time to get 1 :D. but i need help in how to find a good one what do i need to look out for? are the cars pretty reliable? the rs can be a bit of a nightmare!! cheers