General Discussions - 300ZX Related
Z related topics and discussions
79,716 topics in this forum
-
when car is ticken over the revs go up and down from 700 to 1100 but when you start it when it is cold first thing the revs sit at 1500 and drops slowly and then start to go up and down again is this just a blocked hose
-
-
Sorry if this is a re post, but I have not seen it before. Its pretty good!
-
- 1 reply
- 316 views
-
-
:hyper: finally got round to buying another Z, this time a TT :D robogaz's from on here(many thanks, top bloke) still grinning 24 hours on. hope to make full use of this one as my previous Z was a real dog, didn't let that put me off another one though
-
got a bottom end rattle think it is the crank shells onlay when you start it first thing in the morning could it be anything else if not how hard is it to fix do you have to take the engiene out or can you just drop the sump out
-
- 8 replies
- 649 views
-
-
Hey folks Any ideas what the best thing to do with the plastic coatings on the screen sides and targas,mine have peeled/broken away in places exposing chrome areas and look unsightly cheers Paul
-
- 15 replies
- 715 views
-
-
Hi guys, I dont know if any of you can help me out, but iv looked everywhere and i cant find anywhere thatll show me where to put the amp power wire through the bulkhead. Iv removed the battery to see if theres any existing 'holes', there are some but i very much doubt ill be able to get the wire through them?? Any help will be much appreciated as iv presently got my car in bits! lol! Cheers :D
-
- 6 replies
- 1k views
-
-
cant bloody decide what i want first. 1. get some HIDS 2. headers 3. ecu chipped 4. screen repaired/replaced due to being scratched all in my £100 limit i have set myself for this month! arrrgh!
-
- 44 replies
- 1.3k views
-
-
Hello all, After getting home from work today I was just letting the Z cool down and turned the stereo off. I heard a whirring noise coming from the rear / boot area. Occasionally there was a clicking noise while the whirring was happening. Tried turning ignition off and back on again but the whirring returned. Didnt even need to turn engine on, the whirring came in when ignition was on. Is this something to do with the Hicas?? Can I 'reset' or check the system some how?? Thanks in advance ZX_Steve PS I have 1992 UK Spec Manual TT
-
- 6 replies
- 532 views
-
-
Having had the benefit of a Z with a full custom cream leather interior I can say that I really appreciate the luxury and as a lot of other Z's are getting old and tired interiors I am sure a lot of other people would do too. This post is a bit of market research. I will explain. I work in Walsall which is world famous for its saddlery trade and manufacture of leather goods, with suppliers of the finest quality leather products in the world based here supplying royal family, various car manufacturers and designers we have the skills and talents to do anything in leather, I kid you not. Therefore I pose the question how many of you guys would be interested in fu…
-
- 11 replies
- 905 views
-
-
What water pipes are their at the back of the engine apart from the matrix ones ? Anyone got a got pic of the rear of engine too ?
-
- 7 replies
- 543 views
-
-
I have what sounds like a big end rattle on startup from cold only, the rest of the time it's fine. it doesn't rattle when i bring the revs up gradually in neatural and doesn't rattle under load, also there is no rattle on startup when warmed up. I know the oil pressure is good, i've checked it with a workshop pressure tester Any ideas
-
- 2 replies
- 401 views
-
-
My windscreen wipers stopped working on tues just as it started peeing it down and had to drive to silverstone with no wipers. The plastic cup at the bottom of the wiper motor has broken, it attaches to the rod which turns the wipers. Has anyone got one or a wiper motor that is still intact. Urgent cos i use the car as a daily driver and wont really be able to use it when it rains. Any help appreciated. Cheers Graham
-
- 8 replies
- 556 views
-
-
Theres a new site for the Z's http://www.fairladyzx.com Seems good, will be a mix of tt.net, 300zxclub.com and 300zx.co.uk i think
-
- 10 replies
- 533 views
-
-
Right everyone. I am looking for some ballpark figures here, it is time to do my Zed and I have found my inspiration. How much do you reckon I am looking at for a reasonable bodykit (nothing too flash), fitting and a full respray in existing colour (gunmetal)?? Also, any recommendations of bodyshops in the Nottingham area? Thanks
-
- 1 reply
- 273 views
-
-
Hey all, Just put 500quid into my engine (NEw Cambelt Kit, Water Pump, Tensioner, 2 02 Sensors, Oil Change, Auxillery Belts, Alternator) and Thank god its running super smooth now but last 2 Starts on cold when i have started her up the Revs have been jumping from 750 - 1100 just up and down maybe 3/4times before it settles at 750! Now its never done this before im guessing it has something to do with the Cam timing perhaps??? Also another new prob (WAHEY!) is Twice now when coming up to Traffic lights if im in 3rd at 30 i put my foot on the clutch and before i put it into 2nd or Neutral the revs die all the way to like 200rpm so lights dim and it cut out on me (Stal…
-
Two shortie slicktops in the same area thats not fair ! Was it you ???? P.S I was in my white smart car flashing ? :hyper: :nono:
-
- 3 replies
- 472 views
-
-
my car was raised and each wheel checked for play in all directions. seemed fine. if this is the main method for checking common suspension problems (such as bush failure) and bearing problems and it was fine can i pretty much rule this out? see below thread for more background. http://www.300zx.co.uk/forums/showthread.php?t=106561&highlight=bearing
-
- 7 replies
- 693 views
-
-
Spotted this for sale again in Japan, always loved it, shame at the moment i cant afford it but i think its awsome :D I think i would change the colour and maybe see what its like without the spoiler but apart from that its mental :hyper: Oh and its also running the FULL tomei 3.2 kit and TD05 turbo kit :bow: Not cheap though Mike
-
- 15 replies
- 682 views
-
-
i`ve fitted a full decat exhaust sytem and was woundering what to do with the pipes that connect to the old exhaust?(there`s one each side and run up into inner wings some where) do i just leave them,block them off or join them up.
-
- 2 replies
- 315 views
-
-
-
its a 1992 J reg, white, uk, TT... it came from Kent and has reciepts from Sussex and Essex...
-
- 8 replies
- 620 views
-
-
I cant decide what colour xenons to have, i fitted the 6000k last year on my BMW, but fancy something a bit more special, although i know that the 12,000k are strictly a no-go. What do you guys have fitted, pics would be very helpful, thanks guys
-
- 6 replies
- 494 views
-
-
dont want to jinx my car or anything but is has done nearly 110,000 miles now, its a UK manual tt, i have many reciepts for the car but cannot find anything to suggest it has had new turbos, its still runs fine and dosent smoke... my question is will regular oil changes prolong the life of them also do they wear out quicker the more often they boost??? thanks guys
-
- 21 replies
- 1.1k views
-
-