General Discussions - 300ZX Related

i need to replace one of my wiper blades. Are there any blades that show a serious improvement over the cheap halford refills? Did anyone try these flat blade ones on ebay in the end? http://www.300zx.co.uk/forums/showthread.php?t=105770&highlight=wipers any reports?

can someone tell me what the std rolling radius of the z32 is? i.e with std wheels and factory recommend tyres.... The question i have is if my rolling radius is LARGER will the speedo be showing FASTER or SLOWER than i am acutally going and how much difference does it make in mph per cm increase/decrease. I am actually running a HUD with digital readout taken from the ECU but i guess the same rules apply as it takes the factory rolling radius when it calculates the speed from the wheel rotations. Just want to know so i know i am safe when going through speed cameras!

Spot the difference competition :nana2:

I know there are threads about this but was wondering what the best glue to do it with would be. I am having the screen replaced and thought I might take the opportunity to glue the peeled dash down. Anyone got any idea how long this will take as the fitter no doubt will want to get on with fitting the screen. Darrell

For those of you who expressed interest today at Virginia Water and those who weren't there, this is the link to the track day I will be doing with a few mates on the 16th March. :hyper: :nana2: :hyper: :nana2: :hyper: http://www.donington-park.co.uk/trakzone/ Donington is a superb track, I have never had a problem with the noise limit and it works out good value too. You get around 2 hours and 20 mins on the track all in! Come on SussexStu and Silverbullet, you know you want to...

m5 southbound weston s mare dark blue uk auto i think private plate ******7

Does anyone know how the Na Prop comes away from the NA Diff - as i'm puzzled now how to seperate them? Any help would be appreciated! Cheers, Ste

Anyone any ideas?-------------- Zed starts fine ,no problem ticks over fine although does hunt slightly ,no problem otherwise,drive to lights about 500yds ,stop---tickover lumpy like a plug is misfiring or something---drive on no problem---- 11 miles, stop everything fine still hunts slightly but not lumpy.It would appear that once the engine has warmed up the problem lumpy thing goes away.The misfiring thing only happens when the car has been parked outside in the evenings NOT after the car has been in the garage.Have checked the usual things ,plug top wiring connections etc all SEEM ok.Any help or ideas would be greatly appreciated. :bow: :bow: :bow: Chaz :…

i kerbed/curbed (however u spell it) my my alloys! well one of em. i'm foooooking gutted.

What's the std width of a ZX wheelbase, and the width of a widearch ZX in inches please? Thx Lee

i am trying to fit 8.5 by 18 front wheels with an offset of 32 but i am struglleing to get them to clear the callipers as it looks that they would stick outside the arch with a massive spacer that is needed in between as any one had this problem before i also have looked in to extending the studs but am not really sure what is best to do or what needs to be done can any one help

http://cgi.ebay.co.uk/NISSAN-300-ZX-TWIN-TURBO-MADDEST-1-IN-UK-CUSTOMISED_W0QQitemZ200203886954QQihZ010QQcategoryZ18238QQssPageNameZWDVWQQrdZ1QQcmdZViewItem i think the guys a bit too excited by this zed but i do love the rear arches wonder where you get them from not the maddest ive seen but quite good all the less exept the rear spoiler which is not to my taste

:nana2: :nana2: :hyper: I got it!!!!!! I got it!!!!!!! After 18mths of trying to get my car sorted in Germany its finaly done. I drove it from Eric at DTA's in Holland yesterday :hyper: It felt so good to get it back. I :bow: to you Eric for sorting my car and its running like a dream. Also i thank Peter Nendles for sorting things out for me :bow: :bow: The help from everyone in Holland has amazed me. Thank you!!!! Gota go, cus gonna drive back to UK(and pay road tax again!!!!!!!!!!) :headvswal

does this look genuine? i need an uprated clutch sent to nexus performance who is working on my zed but need it there by middle of next week. exedy clutch on ebay

Hi Guys and Gals - Like most of us I am working to a budget. I was wondering if anyone has had experience with or has any thoughts on these; http://cgi.ebay.com/ebaymotors/XTD-STAGE-3-CLUTCH-FLYWHEEL-90-96-300ZX-NON-TURBO_W0QQcmdZViewItemQQcategoryZ33730QQihZ007QQitemZ170197410374QQrdZ1QQsspagenameZWDVW http://cgi.ebay.com/ebaymotors/XTD-STAGE-2-CLUTCH-FLYWHEEL-90-96-300ZX-NON-TURBO_W0QQcmdZViewItemQQcategoryZ33730QQihZ009QQitemZ190202476526QQrdZ1QQsspagenameZWDVW http://cgi.ebay.com/ebaymotors/Koyo-Aluminum-Radiator-300zx-turbo-90-96-91-92-r1439_W0QQcmdZViewItemQQcategoryZ33602QQihZ015QQitemZ250220226420QQrdZ1QQsspagenameZWDVW The car i…

take a look at this pic and see what you think, I wanted to do a conversion on them but wanted something different, also if anyone who has done the conversion can give info on the obstacles i would face let meknow( other than sticky black burned fingers...lol) many thanks to the persons car pic i stole ;)

Can anyone thread me a guide to removing an airlock from the rad/cooling system? i've tried and failed to fix this problem a few times now so jus need to check that i'm doing it right,cheers zed geezers.

Hi Guys, new member here. I am from New Zealand, and I drive a 89' 2+2 TT. I belong to the NZ 300zx club, but you will see me on tt.net, 3zc and aus300zx too. so yeah...Hi from down under! PS: Still trying to find my way through this forum, appears though that I can't send pm's and also set a signature? FAQ says its in edit profiles but :confused:

Just got them last week, they are made by Jenvey, 45mm bore, 30mm tall. They're very compact and feature an ingenious lever and spring system which is very compact too. The levers currently face up but the bodies will be turned around so they face the engine, clearing the plenum floor for a low profile. The 2 banks will have to be preciously matched and I have yet to find a way of doing so. Some modifications to the lower manifold are required. Typical add on is the increased runner lenght, up by 50mm since the original plenum floor also serves as the runner end and the extra 30mm and 19mm from the velocity stacks + the new plenum floor (5mm) lengthen the system. Thi…

Plugged datascan in and get a code 34 - car started 0 times with this fault when engine is running. If I reset ECU and just put ignition on then i get a code 55. Minute I start the car it goes back to "code 34 - the car started 0 times with this fault" I have a 1Meg resisitor in the det sensor plug. Does this mean I still have a code 34? Thanks

Ive been using search with no avail, i cant remeber my speedo unit being taken apart, but I have no Dash Lights, the Aircon display dims when you switch the light son but no dash lights. I tried clicking on the dimmer button but nothing. Any ideas on fuses and stuff to check??

I'v given up on the idea of polishing the lip of my alloys, its just impossible to get in there properly due to the spokes being raised. So i'm gonna paint the spokes gold and the lip a bright silver. Anyway my question is this, once i have sprayed the lip can i put masking tape on top of the basecoat, to enable me to paint the spokes in the gold colour??? Once i have done that i can laquer the whole wheel in one go. Anyone had experience with this?

Peeps, Im trying to sort out some of the wiring issues with my defi control panel/ gauges and the Blitz Turbo Timer. Having some issues now with the wiring harness with the T/Timer. Has any one got fitting instructions in a PDF file or similar so i can make sure everything is going where its supposed to, or alternatively, is anyone around tomorrow to give me a hand. Cheers Nick

As promised mate....... Wings West Rear, If you need any other angles let me know. ;) Neil

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250221060233&ssPageName=ADME:B:SS:GB:1123 Just had this pop up on my favorite searches.