General Discussions - 300ZX Related

as above ta!

As above, light goes out once warm. Does this indicate a problem? What can I do to rectify it? Thanks...

Wheres that paper 300zx model you can print out and cut and glue ?? Cant find the thread ??

as above, an any 1 help

I remember reading a few threads regarding the clock not working but can't find them :headvswal Anyone know what the prob is as the stereo's working etc ?? Or remember where those threads are ?

Im after some pics of aggressive wheel setups, trying to determine what offset I want for 8.5" fronts and 9.5 or 10" rears to get the wheels flush with arches, or even with rolled arches. Going to be running more negative camber so can get away with more.... Do you know the offset and width of your wheels ? if so please post pics

I currently have someone looking in Japan to get hold of this kit, how much interest is there in this kit? as we could probably replicate the kit once I get hold of it, (if there is enough demand...)

my mirrors arnt working and im trying to establish why... checking the fuse (if i can find it 1st) then go from there. any ideas thanks

Hi all , im having my alarm + immobiliser fitted today be a friend ( fully quaified !!) He loves Zeds too! and has said if anyone wants alarms , immoblisers of any electrical items fitted he will travel to where the work is , also he will give a discount to the 300zx club members, and belive me when i say when i was ringing around he out beat anyone i rang or contacted online by roughly £210, I dont want to go breaking any rules by put his details up without permission!!so (This is to the mods) will it be ok to do so? Thanks wayne

Hi all, ive been having issues with low boost with no fault code on ecu ( been check after driving without ignition being fully turned off so ecu cant reset its self) i believe iit mite be the boost control solenoids but im not sure what they look like or where they are, any help would be great, Thanks wayne

Hello to you. Missus saw you on the A52 today near nottingham somewhere. Ivan

is it easy to fit a manual boost control or has anyone got any suggestions on upping my boost, as its running at 7psi. :confused:

My sister keeps tell me she has seen a silver ZX in preston. In her words "Its lovely, much nicer than yours... thank you very much helen!" Apparently it lives near the suzuki garage, anyone on here?

As above really got some from a member on here and thought it would be a good idea to replace them before i fit them.

my car runs high revs at first then slows to just under 1000 revs is this ok, my other 2 seemed to rev slower on tick over. cheers.

I had just left the multiscreen having seen Rambo (plenty of action there) and was heading back home to Swindon, just turned into London Road and passed this nice silver Zed (like mine!) waiting to come out of either Alvin Street or Oxford Road.....I think. WAS IT YOU??

All you Zed mechanics and genius's out there please hear my plea :bow: :bow: :bow: I have to take my engine out to redo my turbo's and to fit new clutch and flywheel. I have looked at the guides online etc I have a workshop and a hoist where said deed can be performed. I just really need some assistance in doing said task. I can't afford to check it into a garage and them do it. So its down to me and anyone who would be willing to come and visit. I am more than happy to pay for anyones travel expenses and to keep you fed and watered to the highest standard. (By that I mean fillet steak and as much stella as you can drink (or any other drink of preference). Also by wa…

Anyone got the picture of the incar carputer installation that looked stock? Think it was legraths?

Just installed a nice new frontmount intercooler but now the engin kind off splutters when she trys to boost up and jerk and backfire a little (or try to)!! anyone got any ideas, its got a boost controler and has been remaped.... im stuck!! cheers

WShe's all home safe and sound, Now starts the interior wheels and install. Interior pannals are all retrimed and just need to go in, wheels are in the garge, just need the tyres putting on, and just need to put the stereo in...... errr the only thing i need are the seats retrimming! so all in all not bad, It's taken a long time to get to this stage,and it was a bit noisy on the way home with no interior in but i still get a smile when i drive (even though in the nearly 2 years i have owned her i have only driven her twice... once to the body shop and once back :shock: ) But now the fun begins, and the summer is drawing near as is Z008 so look out, i'm not hard…

Right i have done all the searches but it still not clear to me what the problem is?? All the cars temps and everything runs perfect. So when i am sat on the drive the heat blowing out of the blowers is ok but no where near 40. Then when i start to move it becomes chilli, then i might as well not have it on. Now the pipes that go through the bulk head, 1 is as hot as it should be and the other isnt cold but isnt even warm. So it does seem to be circulating a little, so its as if the little valve that controls the temp is stuck open at around 10d So does anyone have an idea where the valve is. or can it be replaced OR could it be possible it c…

Hey, Was wondering if someone could tell me if the NA only has 4 bolts onto its diff? And is the propshaft 3s71a in the online manual for an NA? And how many bolts for the prop on the back of the gearbox, the difference i'd see on the gearbox mounting to the engine - as i think i have a NA diff and prop shaft. Cheers, Ste

My zed doesn't have these (think it was a cost cutting thing). Can one of you guys tell me how they are attached? If they are bolted on its a bummer as there's no holes for bolts on mine. Would it be ok if I used something like tigerseal to bond them on or is that a bit risky? The force of the wind is quite strong at high speed. (guy behind might get a nasty surprise hit his windscreen!) I'm just annoyed because at 70-80mph the wind flipping resonates over the top and it feels like there's a jackhammer pressed against my head. jay ---

Hi all, After posting how easy to change engine wiring loom I think ill just change plugs on injectors, anyone know where I can get some? Thanks

Hi all, Ive noticed a few people have these wings now! Did any of you have problems fitting them as mine dont seem that straight forward looks like alot of work is needed especialy on the lip that bolts on under the bonnet. Cheers