General Discussions - 300ZX Related

http://cgi.ebay.co.uk/1991-NISSAN-300-ZX-2-2-BLACK_W0QQitemZ300288663892QQcmdZViewItemQQptZAutomobiles_UK?hash=item300288663892&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A7%7C39%3A1%7C240%3A1318 Wow ive been hunting for one of these for years:rofl::rofl::rofl::rofl:

spotted on London Road parked up 7pm 21/01/2009 looked very nice :) think it was pearl white anyway!

Am i right in saying that the NA horsepower around 225 bhp, mine has a mongoose exhaust and induction kit, what horsepower would u say that would add?

Hi all, I maybe getting some new wheels 2nd hand but the fitment is et30 is that ok for ours zeds? Also they are 18' 9.5 on the rear and 8.5 on the fronts will i have any problems? Cheers Dan:dance:

Anyone have a picture of how these are connected on the UK cars? I'm wondering if the wiring is there but just not connected up on japanese ones? Going to use the original fog switch for my rear fog now I've binned the front ones.

hi can anyone help. i cant work out which resivoir in the engine bay is for what? can anyone tell me which is for the clutch fluid and which is for the power steering fluid. i think i got it licked i believe the one near the suspension mount is for the power steering and the one at the back of the engine is for the clutch fluid. can anyone just confirm this is right? cheers

-------------------------------------------------------------------------------- just want to know if we are going mad or what! the manuals & various searches have told me that the timming should read 15btdc ..... when we rebuilt my engine i set the timming up & when running we could not get it below 27btdc..on conzult & 35ish on gun..so me & Dan have redone the cam belt & while we were doing so john popped over in his 300zx tt so we checked his tmming & his read about the same 25 on conzlt 35 on gun is there something we are missing or is his zed timming out too? all readings were taken on a warm engine in Netural al fans off etc.. …

With the recent cold weather I went out to open my Zed turned the key, heard a click and something fall to the inside of the door and now can do a fill 360 with the key in the lock.... it is super safe though as I can't get into the fkr now :-) Question: Where can I get a new lock, or get this one repaired? and what is the likely damage? I'm in South Wales. Old cars....don't you just love the excitment of not knowing what's going to go wrong next.... :rofl::rofl:

In addition to fitting my oil pressure gauge, I'm also trying to fit a water temp one. The sensor for this gauge is also 1/8 NPT, which definitely won't fit in the stock location. I'm thinking about drilling and tapping a 1/8NPT thread into a suitable location on my top water pipe to fit the sensor (when I can find the right bloody tap...). Will this work, or will I not get a good seal without getting a boss welded on first?

Argh! I'm about to fit an Option oil pressure gauge but I can't find any definitive answers on whether the sender that comes with it will fit in the stock location. I've done a search and found Jimmy's post, but I don't know if he was trying to use the stock location or not - were ya Jimmy? My existing stock sender is about knackered, so I don't mind getting rid of it and just using my new gauge, but I want to make sure it'll go in or I can get the right bits ordered before I have my brand new oil coating my drive... The sender it comes with has a 1/8 NPT thread - will this go in or will I need an adapter? I tried the site suggested by Z32 (gaugeplace.co.u…

Yes its happened. As you can imagine I am rather pissed off. Monday afternoon my mate saw a silver BMW reversing up the access road to the back of our houses (no through road) with 2 eastern euopeans in it he confronted them and asked what they wanted. They replied "we want to buy a car from here" He told them that there were no cars for sale and they went. At 23.15 I left for work and as I passed my mates Soarer I noticed that the passenger door had been forced open at the handle and it was ajar. I knocked he's door and we discovered that the car had been broken into. I promptly went back around the rear of the houses to inspect my cars. The skyline and others we…

Anybody ever seen a JDM ECU that is not one for a stock car? I want ECU for 555's and hybrid turbos, Stillen intercoolers, induction kit and exhaust

Hi Guys and Gals, As the title says .........I fitted my new Koyo radiator bracket (from the Z Centre) tonight. A couple of issues that I'm sure you'll help me with : Firstly - using a standard bonnet prop clip in the slot furthest away from the rad cap secures the bonnet stay but not too well and the bonnet prop rests on the radiator cap ........any advice? Secondly - I still have the original viscous fan, cowl, etc... and had to detach the fan cowl from the radiator lip in order to get the bracket to fit correctly. Is that ok in these circumstances? All being well, I should have attached before and after photos. Thanks in advance - And…

Spent the day building the other sub enclosure... just have to finish the amp rack cover and cover it....... should only take 2 or so hours... the cover the rear seat.. but run out of wood lol... so that'll have to wait a wee while... but i'm really pleased with in concidering my chippy skills are crap :whistling: Cheerz Neil

when the car is running and i disconnect the tps, it does the usual hunting around till the revs level themsleves off, then i get what sounds like an electrical spark noise coming from the aiv area and the revs jump to around 1500 rpm the car is runing crap yet again and im getting annoyed now why would it do this

is there anybody near hailsham who has a spare digital clock? only want to try it as mine is no longer working so just want to connect it and see if it my clock thats dead or something else!!:confused: if anybody can help it would be much appreciated thanx mark

What running temps are people getting when fully warmed up? On an aftermrket temp gauge?

Does the stock fan run off the crank but ecu controlled?

PLEASE PLEASE put what you are paying for when you send money !!! if you have paid for something via paypal can you add your name to this thread as i have a couple of payments that i dont know what they are for many thanks

hi all, long time no speak, i took this system off my Z when i bought it to fit an hks superdrager because i love the noise they make, the system i took off is advertised on ebay and some body has asked if the system will fit an n/a? isnt the only problem if its lwb or swb? http://cgi.ebay.co.uk/z32-twinturbo-300zx-turbo-back-exhaust-RESERVE-REMOVED_W0QQitemZ230320307755QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?hash=item230320307755&_trksid=p3286.c0.m14&_trkparms=72%3A1299%7C66%3A2%7C65%3A12%7C39%3A1%7C240%3A1318

A cautionary note to not jack up your zed on the auto box sump! Jeff TT

hi everyone ........ Markzx ....has a lot of problem's ,at the monment ,he is in ,court fighting his wife,over who own's want ...etcetc ..... I have spoke with him .....and he will do his best,to send part's out too people ,he has deal's with ..... any prob's ...PLEASE calll me ....07798625541.......and i will do my best to help you ..... many thank's wozzer ./... ..

Reason i ask is i bought my zed with a koyo rad,kenlowe fan controller and standard rad hoses already fitted....soon after the kenlowe gave up and was leaking coolant because of the copper probe wedged down the rad hose, so i removed the probe, tightened up the hose and had the fan wired to stay on full time (temporary fix).Anyway just bought some aftermarket radiator hard pipes and was previously thinking of fitting a sandwhich plate fan controller in the top hose but this is not possible now because of the metal pipes......so i was wondering what types of fan control you guys have got and where do you take a coolant temp reading from as ive got a gauge wired from the to…

Just got a set of these to match my shiney new fog lamps. Am i right in guessing some Z's had side lights in the indicator units? As there are holes for 2 bulbs on each one. cheers rich

:(what do i need to sort out leaks between t-tops & doors.leaking on both sides.94 z32.help!!