taff

I think an eaiser conversion is a 32 gtr diff these are 4.1 and are a machincal clutch type lsd they lock much more agresive than a worn old vlsd .They also use the same subframe mounts and are a r200 you stil need the na frame but thats it they use the same 6 bolt output shafts as the tt .So you can keep the thicker tt drive shafts and the tt hubs .They also have the same 4 channel abs as the tt i know a lot of na zeds have no abs .I havent done this yet but i looks like it will all go together ill let you know .

Can you get a poly bushed gearbox mount my mate has an uprated one on his s13 maybe they do one for the z32 as well or maybe the s13 one will fit only an idea.:)

Thanks i dont think its got a rca input but i think its got a Ai net socket it looks like you can get a Ai net to rca then rca to 3.5 jack plug .;)

Ive got an oldish alpine head unit can i just get a rca to 3.5 jack plug and plug into a i pod or is not as simple as that .Or do i need a fm modulator thing thanks taff.;)

Is that black slicktop with the stripes pk1 s old yellow slicktop .

I cant find anything about nismo edtion z32 i think this guy is talking rubbish. I done a bit of research on diffs and it seems a r200 on a na sub frame will fit as we now .But it seems you can keep the thicker tt drive shafts and tt hubs if you use q45[certain years] output shafts as the q45 uses the same thicker tt drive shafts as the z32tt.

I wouldnt say a Korean made coilover is better than a tein flex monotube coilover but they seem ok and good value.;)

Seem good driftworks sell them . http://www.otomoto.com.au/HDSystems/

craft square or veilside .:cool:

Found this posted on the net is it right [i just thought every one should know that you get a 4:11 ratio r230 in a z32.its only in the nismo edition z32.mine was a 1999 model i think those were the only nismo zeds.]

Nothing to do with lowering its so you can adjust the front castor.

Done a bit of research on this engine its not a z31 engine [ twin cam] it was fitted to gleoias- cimas -lepoard models has the same quad cam engine as the vg30dett but with a single turbo t3-t4 flange surley this is the engine to run a big single turbo on a z32 .Or maybe just use some parts from this engine ,exhaust manifolds and intake system .It can also use a normal type front mount intercooler.;)

Think ive sorted it ecu temp sensor green inside plug[ corroded] .I didnt think to check this as i replaced the sensor 2 months ago could do with a new plug can you buy these separatly.;)

Were side skirts ever fitted on any swb models from the factory i think the version s or r was but wasnt sure if they made a swb model of that .:):)

My zed has just got a problem not a missfire as such just jerking at low revs 1500 /2000 rpm most noticeable at slow speeds in 4/5 th gear.It happens at around 30 /40 mph above 2000 rpm fine any ideas thought it maybe plugs or coilpacks but it runs smooth over 2000 rpm thanks :cool:

Ive got defis in glove box panel ive used a thick cable tie round the back to hold in place.

http://www.maniacworld.com/Record-New-Years-Eve-Jump.html

Looks good welcome to slicktop ownership :):):)

Aparently the car was resprayed when imported ino this country in 2005 with nissan eh7 paint because it had faded in japan .So im hoping the colour match isnt to bad im taking the fuel flap with me as well thanks .:cool:

What sort of colour match do you think ill will get .Im going to get a pair of door mirrors painted i belive this is a tri coat pearl .Anybody had experence matching eh7 thanks taff.

I had this break on mine managed to get hold of a metal one not sure if nissan changed to metal ones at some point in production.;)

Thanks im still unsure its not the same panel as the one in pic mines one peice .

Must of been 10 years ago at a silvia engenering open day in maldon , loads there had an s13 200sx at the time never realy seen any 300s to i started going to se for mods for the 200sx , spoke to some owners but they were around 15-20 k to buy back then.

Any body got any pics of an abflug revolfe rear light panel got one af ebay cheap these are mega rare never seen one outside japan.And abflug dont make them any more .I may not like it when its fitted i thought they were ugley but it looks ok think it will look better with the perpex boot infill panel .Ive searched the web for pics of one with no luck thanks taff.

Didnt jason farrow have simalar things to this just not slatted.