sayers

two questions I guess, is it possible to lower the physical height of an na clutch pedal ,when released mine seems higher than the brake pedal , if so how?, and in turn how do I lower the biting point of the clutch Thanks Sayers

as a guide , JT automatics say NISSAN 300ZX V6 3.0L/ TURBO (1990-UP) RE4R03A 4 SPEED £795.00 Gearbox £250.00 Torque converter £190.00 remove and Refit £75.00 fluids £1,310.00 (exc VAT) £1,572.00 (inc VAT)

I cannot tell you the difference between an ALC 1 & 2, however I can tell you that the difference it will make to an Auto box is massive, changes are far faster, and the box does not seem to wallow so much, but, if you want your car to be the animal it was made to be, get rid of the auto box and make it manual, I was a committed auto box fan, however after going across to manual last week my car is properly transformed. If you are going to stay with your auto, then my old HKS may be for sale. I left it with the garage that made the change, If necessary ill email you their details

first things first for me , ill get the vernier out and measure the hub diameter of the car , and the size of wheel centre , thanks for your help gents , much appreciated

Thanks Si, I am looking at circa 30mm bolt on , my current wheels ( came on the car ) don't have any spigot rings , they just fit the hub centre, the wheels are something like mahidi, or madi, split rims or something like that, to me they looks like Porsche 928 wheels teledials.

Looking to buy some wheel spacers, what is the best type to go for, my wheels although non standard fit the Standard wheel hub, Thoughts, Cheers Sayers

how do you mean Stephen " Understeer" , I don't see how fitting plastic arches can effect any change to the steering ???

thankyou, now where to get them from ??

Bumping up this thread , as I am looking for the same

Okay, a bit of a marmite look, Im considering fitting plastic rear overarches, I think similar to to those which Baz had fitted , but not at sticky out. Any one where I could buy said items, Or what other manufacturer standards may be made to fit, Thanks Sayers

yep, my engine has been out and serviced recently, its running really well and I don't want to muck it all up by pulling the lump,

But I need 2 of them

what happens if I permanently ground pin 44 on the ECU

What are the largest uprated turbos that can fitted in a Z without taking the engine out ? Cheers Sayers

er , even more stooped question whats the neutral switch, where is it , and how is it connected

er , even more stooped question whats the neutral switch, where is it , and how is it connected

Hi, when converting to manual from auto, what do I need to do to change the timing , I understand that an auto will run at 20 degrees not the required 15 if I don't modify the wiring , Of course I may be dreaming all this ! Can anyone help ?

me, ill talk to you about it if you wish 07929159828

As above needed please. Ideally needed delivered by Friday of this week. If you can help please drop me a text 07929159828. Thanks Sayers.

Thanks chaps

Where do I get a replacement set of pedal rubbers or foot pedal covers, non chavtastic though. either way, whatever I end up with I need to be sure that they are the correct fit , not just generic tat Cheers Sayers

Hi I need the Cruise Control cancel switch which is mounted on the foot brake ,and / or clutch pedal, It is black in colour, ideally I need the connector that's clicks into it with a couple of inches of loom attached, better still would be 2 of the loom connectors, If you can help let me know ASAP please Thanks Sayers

that is the strange thing , the old cruise control switch located on the brake pedal failed , so I connected the two wires permanently together, However the Cruise control STILL cancels correctly when I press the brake pedal, how can this be ?

And I can connect the wires to this ( Clutch ) switch directly from the brake light pedal switch. ?

so that will be opposite to the brake pedal switch which uses a white switch . The white switch creates a circuit when the brake pedal is pressed. for the clutch I need to use a black switch ?? which will break the circuit and disable the cruise when the clutch pedal is pressed?.