znut

lazy lam sensor

2.5di

i found out by frustration mate after getting sent the wrong ones twice from ebay and 3 times as much..went hunting around the factors this mornin and then Bingo..

For anyone needing downpipe gaskets (3 hole type) just go to your local motor factors and ask for Ford transit 1991-2000 ones...2 1/2" and the same hole PCD. Only £2.75 each too:cool3:

remember mate this is a family forum:D...on a serious note iff the car is running ok then it must be fine

also check under the passenger seat for a 12" rubber vibrating dildo...ive heard those Duracel batterys can last for months on low power setting.

iff its a humming then the pump seems to be working fine mate

Get a 12V tester Dave and take the earth side to a sound earth (neg batt is best) and put the positive to the middle pin in the bulb holder and see if its live..if you get power then its the earth on the bulb holder. You can do a continuity test on the bulb holder earth and the other lead to chassis earth point and see if you get a buzz..iff you dont then its the bulb holder earth either the holder or the fixing to chassis

What a fantastic thread...thankyou mate for some great pics:bow::pint:

Why dont you go and measure yours then you will know for sure what you need,leaving the simple choice left to slots or drilled:)

Needs a load resistor the same value as 1 more bulb..or a simple fix is have a slave bulb wired into each side and have it hidden in the boot,this will load the flasher unit and the world will be good again

Hello and welcome...nice rims:cool3:

according to the current goverment no..

we need to make this post a "sticky":wack:

Tom... myself,the daughter and the missus went to St Ives 2 years ago and stayed in a fab hotel overlooking the harbour from a hill...it was called The Tregenna Castle hotel. We stayed 2 nights and the rooms are great,check it out here http://www.tregenna-castle.co.uk/

Anyone need a chuckle on a monday night:rofl:

:rofl::rofl:

you forgot iff you buy 6 spark plugs then you can only fit 5 unless you then remove the balance bar to remove the 6th coil pack then realise a rubber O ring from the bar has come off the plenum and fell down the back of the motor:headvswal:D

52 winters old, still roofing every day,280llb with a fat index of a 30 year old,can still bench press a small house and run a 5K the same time it takes you to eat a sayers pastie while stopping off twice to piss, have my own hair and teeth and shoulders like boulders:tt2:....its my joints and bendy bits that dont bend any more thats all:rofl::rofl:

looks like we have conclusive proof Allan of your question and 2 things back this up 1..people do browse with there phones alot 2.. there seems to be a lot of members and users with fat fingers

Ahhh ok thats cleared up my puzzling look thinking "wheres all the electwizzdry fit":1eye:

thats just makes me speechless Rich...little tVVats should be gassed and should of been at birth :rant::rant:

Now that is good Rich... not for me but very good. Be just up Andy,s street that with all the whistles and bells:cool3:

Just wrap plumbers PTF tape around the sensor thread before you fit...gives it a nice snug leak free fit:)

it should be 25 psi on idle and 80C temp...it would appear as iff the wires have been swapped around,strange:confused1: