greg

running around 1bar of boost would be roughly 360 but at least he doesnt say its running 400hp with an aftermarket exhaust only :rofl: ,looks a tidy motor

so jd has a supra in other words :rofl:

we have a breaker in at the mo craig,so give ryan a bell 0796816640 sure he can sort you out bud,IIRC the rear bumper is still on so should be able to help,failing that ricerocket in the trader section

a chip removes the limiter on the speedo so instead of buying a speedo convertor that has a habit of interfeering with the sensitve speed sensor it enables the limiter to be removed,and may- depending on the chip also increase the rev limiter slightly stay away from the cheap chips on ebay allthough one of the mebers on here sells them on ebay and the chip is fine IIRC as the chip is socketed in to your ECU and needs to be soldered in,unless it has been done already,a good tv/auto electrician can fit one,but i wouldnt recomend you do it yourself,as its very fiddly and can be expensive if you damage the ECU

there is usualy a bit of play in the arm at the jointed end,but if play is excessive then replacement is needed,they come in two parts the ball jointed end! and the tie rod itself which connects to the hicas itself

happy birthday stu

are you doing it yourself or with two? makes life easier if one presses pedal whilst the other collects the fluid and locks of the nut whilst the pedal is compressed or you still have a leak/or air air getting in

99spec everything ;)

same scenario as increasing boost that little bit extra strain is added to an already old worn turbocharger-therefor its likely to fail more rapidly im not an autobox specialist,but would imagin the hks alc would put a worn box under even more pressure and shorten life

td05 16gs is correct also when they were fitted custom oil lines were made for the turbo feeds! as the housing was to big to accomadate the stock oil feeds so yes i can say they are td05 16gs.which you should of been told when you bought the car ;) capable of 22psi not a problem,although with that rear diff anymore power is overkill :rofl: :D

looks a nice motor,manuals are harder to find these dasy aswell,and the auto box isnt the most reliable so could be a good buy ;)

nice one mate,looks a tidy example ;) all the best

either the clutch booster has failed or leaking or it has an uprated clutch triple plate or equivelent or your use to saxos :rofl: only jestin bud,more than likely one of the above

sweet :D

Only joking bud,there was some chap on the dancefloor partying and he kind of matched your description,shame you didnt make it bud ;)

nice one jack,how much then ;)

well your twin bro avin it large on the dance floor,we called him party kev pmsl :rofl: ;) :hyper:

you were there what you on about :confused:

hope everything turns out ok chris :(

1 terminal to fog 1 terminal to earth/ground 1 terminal to battery live as dave says one feed will be for the illumination,use a multimeter to find 12v+source

to add also looks the biZ si ;)

yeh i want one,[in a andy style voice] :rofl:

glad its sorted mate ;)

:( T-POT bought a nice steering wheel of ebay a momo style one and you can bend it,dont think he was to impressed,but im sure you have a nice sturdy one vin,once its fitted make sure it doesnt bend as sometimes they are made out of cheap metal

best external mod you can do to a z IMO