vijay

Cheers guys. I did look in my manual but didn't see any socket sizes mentioned :confused:

Hi, Can anyone tell me the right size socket to remove the rear hub from the driveshaft? Cheers Vijay

would a dremel with a cut off blade get in there? or a cut off blade on an air tool.

turn the heaters on max heat and max flow while running the engine, that will circulate the water and get the air out :)

IIRC a TT isn't on the database so they have to put your car through as a N/A which should pass no probs (unless you have serious running issues) I catually had to bring the flowchart into the garage to show them what they should be doing! lol

Agree with CJ, I'm sure that's down to a faulty ECU. Vijay

Can you hear the motor running at all when operating the switch?

Hi, Contact Mike Feeney - http://www.mjpauto.com/ He'll be able to help you out :) Vijay

what did they initially quote you?

Cheers guys, I've got one off an N/A already ;)

Hi, How much of the rear of an N/A is needed to swap the diff onto a TT? Do the hubs get swapped over too? Cheers Vijay

Yep, handbrake is off. Eric, that's how I did it before on the passenger side, worked a treat. Thanks for the reminder :) Vijay

Hi, Any tips on removing a rear brake disk that is seized? Got one size off but the other is stuck fast :( Cheers Vijay

Have a look at a BMW if you can, pretty sure they have a jump point in the engine bay and battery in the boot. Vijay

Hi James, The oil pressure gauge is known to be a bit hit and miss, normally a change of sender or an aftermarket one sorts it out :) I'd certainly be asking a few more questions about the engine change at 70k :( Vijay

no seperate one on mine either, uses the boot switch

The switch is in the boot lock unit

cylinder leakage test, take it I need a bit of equipment for that?? Vijay

does this help bud? - http://300zx-twinturbo.com/cgi-bin/manual.cgi?list=el&dir=&config=&refresh=&direction=forward&scale=0&cycle=off&slide=112&design=default&total=133

Cheers guys :)

if you get a low reading, what could be the cause?

Cheers guys, all sorted now, managed to get a PCMCI network card but getting the driver on there took hours :( Vijay

Cheers guys. No network card port on it so can't connect it that way or connect to the net. Was hoping to do it without buying anything as it's not my laptop but seems the only way :(

Hi, I'm trying to get some files off an old laptop running windows 95. There is no USB connector and the floppy doesn't work. It has a parallel and seriel connector but that's about it :( Any ideas? Thanks Vijay

Not impressed with them, they told me they didn't want to know unless they charged me again and I had 2 sets :( Can you update this post when you've had yours done cos I want to call them again but don't want to speak to them untill they've done yours (don't want to mess things up for you ;) ) Vijay