edk83

Im looking at injectors at the mo as want more headroom. Car is still running rich at 14.8psi according to noble but dont wana runt the risk.

yerp its all coming out!

The internal temp one is on a plastic heater pipe that i pulled out from under the dash, the connector on it is just really tight. Anyone know if I have to take the center console out to get the dash out or can it be left in?

Its on the bottom spoke of the wheel right? Thats what I have been trying at but can find a screw head to undo.

come do mine lol!

ahh, ta hellraiser. Dont think you can get the dash out with the steering wheel in the way, in any case its just better for access, seats coming out too probably, so i can lie under the dash to get at the clutch pedal etc. Im changing the heater matrix and clutch booster by the way. Ed

cheers, Ill try pulling the center off the wheel than, if i break it ill just put an aftermarket one on. I have took the screws of the hazard switch assembly, does it then come out the pod? Still cant seem to get to it. I'm off work now till the 31st so gonna try and do a couple of hours a day on it.

Well I have finally started to take my dash out. I have given up outside for today, come in to build my gauge cluster. Following issues so far: Cant get the bloody hazard switch connector off Fog light switch has been bodge soldered by prev so im gonna have to cut the wires. Cant get the stpuid connector off the internal temp sensor Cant feel a screw head in the rear of the steering wheel to get the cover off, to get the wheel off. Can anyone help with these? Can of worms lol!

does it idle ok?

I'm getting mine done but just the two roof bars

sounds like you got a short somewhere but no the elec windows switches dont light up i dont think

1) duffers 2) fairladyzgirl 3) Big kim 4) mattymoo 5) hellraiser 6) retro620ti 7) boldy 8) coopers-swb?? 9) wozzer(AKA ZIPPY) 10) Grolls 11) anthonyd 12) JonLowndes101 13) emero 14) cybernet 15) Darkside TT 16) viniboy 17) Zogg 18) madmarco 19) S-Tune 20) gazza and julie 21) CJ with claire and dogs ( ben & jerry) 22) Saikoracer and the katskers 23) smithy 24) Shrek 25) The Dark Warrior 26) DCarey 27) steve burns 28) Joely P 29) Suzy 30) Tulip 31) Chewie 32) Geoff Jordan ??? 33) Crotchrocket 34) Derek Sulley 35) OZ-ZX and Sam 36) simon300zx 37) Nidge74 38) Legrath 39) Hitman13 40) Tony 260Z 41) dalos 42) red zed 43) margixxer 44) Wingnut My_fair_lady + reece 45) markzx 46) DJZ 60 47) Moggy and his hypnotic pussy! 48) RSJ 49) JEZ300ZX 50) wemzx 51) MaximG 52) Jambtee and good lady 53) sharpy 54) JJP + 1 55) SkylineDave 56) Snowygt + missus 57) Reddel 300 58) Quagmire 59) Russ 60) Silverbullet 61) car.mad + 1 62) Daves_Zed + Karen (Assuming Eliza is still running then ) 63) Nickz32 (should have a zed by then, if not ill be in the beemer) 64) Rat 65) chris_300 66) bird 67) edk83

12.7 now that must have been a quick z!

aye, its normally burnt out old connectors that cause it? Did they change the plugs at all unseating the connectors can cause them to be a right pain.

I have a uk spec oil cooler fitted, its about 16 row i think better than the jap 8 row anyway

Sounds good, cant wait! I'm gonna book a few laps in my supra before hand i think.

Slick pete has a stainless system for sale, it has no cats but has a bullet boxes etc which should dampen it down a bit. I think wsnuk was buying it but worth a look if he still has it

I bought the side mounts you linked to on ebay. Didnt want front mount blocking my rad and oil cooler. Had them fitted yesterday and I'm sure the car has more go. I'll be booking another session on the same rollers and will be back with the hp gain shortly! Only thing I found is that mine didnt come with any brackets etc and didnt have the right hole drilled on one side so are mounted with the pipes and one bracket. Not going anywhere tho. :)

Harsh! I have been driving at no more than quater throttle today!

There is one for sale near me. I asked about a test drive They said it would be fine after I had given them a 35K credit card deposit which is the insurance excess!

My hicas is removed. Hicas cancel bar from z centre New rear ball joints and track rod ends all hicas hydrolic lines are removed hicas pump removed power steering pump just has the pipe looped back round to itself, proper way would be to fit one from an na as they didnt have hicas. Just gotter remove the warning light now! Cost about £400 in parts

http://viper-performance.co.uk/index.php This place any use to you Keith? I had some hose from them before and its good stuff, they might be able to do custom stuff, also says they do ally tubing as well. I'll have to pop round again sometime and see your v8 again! Mines not too far off now either!

time for a conversion then.... :)

maybe you could chrome it once polished, but i wouldnt want mine filled up with chrome

I got pulled ages ago and let off with a warning. My front plate is much smaller than the proper ones. My rear one looks just like yours and i thought it was legal But he said that the characters were too thin, height on them is ok tho Since then I have been looking for the sticker type ones you see on mx5's and had one on my old mini you cant buy them as number plates now tho so I have stopped bothering to look