General Discussions - 300ZX Related

http://www.ebay.co.uk/itm/RS-Performance-300zx-fairlady-99-spec-wing-spoiler-lip-FRP-FIBREGLASS-/221242709703?pt=Motors_Car_Truck_Parts_Accessories&hash=item338317d6c7#ht_177wt_958 Discuss or get the hose:cool3:

This post on TT.net shows the installation of a Nismo Euro Spec Oil Cooler Kit: http://www.twinturbo.net/nissan/300zx/forums/general/view/2212694/Nismo-Euro-Spec-Oil-Cooler-Kit-21305-37P00K.html It is the same as installed on my car from the factory (the pictures are clearer than I can take the moment with all the other stuff in the way). This photo shows the power steering cooler taken through the bumper. It is fitted on the mounting bracket you can see in the pictures in the TT.net post. This is the parts diagram for UK/Euro power steering piping (hydraulically actuated Hicas): -Andrew

Can anyone remember who the guy on ebay was that was supplying the above? wouldnt mind getting a drivers side set before i need them

Very quiet in here today, everyone ok or is the boss about? Jeff TT

Its not often i post in here asking for help lol, but sometimes a problem shared and all that. Here goes: car ran fine, then recently started chugging on tickover, which i thought i had pinned down to the temp sensor, the clip was missing and wasnt seated tightly, sorted that issue and all seemed fine. Then this week kept stalling on me and hunting, gave the throttle a blip and stayed up for a while, but tickover was lumpy, power down until past 3k or so revs and eventually pulled well. So i decided to do a process of elimination and some connector checks. All the injector plug terminals had some green corrosion, even though i had used dialectic grease on them p…

Hi all, I have been told before who to see about potential body work jobs, but being new and having a brain like a sieve I can't remember who it was. Can't remember their name or username on here :lol: need a quote from someone for a bumper respray and some sill/quarter panel work. Plus it's my daily car so the less time it's off the road the better :)

Hi All, Coming back home last night I started to get a squeak/thud from the front suspension area. It has stiff Eibach suspension on and that side has taken a few big hits over the years. Anyone know if this suspension uses stock bushes or can I get some upgraded ones instaed and anyone know who stocks them. Cheers in advance. CT

Heya Guys, I notice a few of the regulars still posting so thought I'd put this up for some honest advice. I pretty much live in France now chasing surf and am back for 3 months to finish a long list of left-behind projects. I'm 100% going to shift this 300zx of mine (The White one I used post loads of pics for and as far as I could tell was always in the top 5 power-houses in the UK) -- I don't say this to start a debate!! :) So, I haven't even started my 300zx since JapFest a few years ago, it's sitting in the same garage it was always in. AND There-in lies the Rub - House is no longer mine and the new inhabitant ( Mother-in-Law) is F'ing a…

Now that i have your attention I am sure this is under the right section, as I is in need of help and advice. So Ive been on the hunt for a few parts and nothing major just the norm but can find anything that is budget-able atm im so broke i cant afford to laugh :crying: my baby needs some TLC and I want her back. she currently is just sitting all sexy like in front my house waiting to be touched. so i will be making a list of things I need/want to bring her to my viewing pleasures. 1, Spoiler mine has rotted in the middle and is heavy as hell... paint is cracked and nasty looking. i want the same type or maybe a mid level one not to su…

chaps does anyone know who makes this chip? any information what horse is it good upto etc would be much help

Blackpool Illuminations 25th August - 29th October 2014 Who's up for it? What date are we going to hold the run next year? Richard and Wayne who done such a fantastic job of the organisation this year, would you please be up for doing the same again next year? I'll help if you need anything. Get your names down early for this, you will not be disappointed. ACraig + 1. 2 nights

A couple of months ago, my viscous fan coupling decided to spit out all it's oil, I replaced it with a second hand one (very kindly donated by bruce300). This also has now decided to spray it's oil content all over the surrounding area....:huh: Is there something causing this to happen or is it a pretty common occurrence? What's the best way forward - another viscous fan coupling or go the electric fan road?

In the Zed community where let's face it news travels very fast especially bad news, I have been sitting on this info/pics for about 3 weeks now and I get no pleasure from it but only to inform you all. I was shown these pics and more of this car and it dawned on me that I had seen the car before, not having to look far I found it and it belong to a very high profile active member on here..........Paul C had owned this UK Zed 11 years, sold it earlier this very summer and within weeks.....well see below for yourself - now a Cat B, apparently 'the rear kicked out on a dual carriageway and the driver lost control'. Sorry Paul if you didn't know bud, I guess the fo…

Hi guys, yesterday my car developed strange noise. It sounds something like when you put a small metal ball inside a plastic cup and shake it. I'm not sure if the noise is coming from the top of the engine or the back of engine. My car is an automatic, I can always hear the noise when I put the car in drive, and only sometimes in neutral. Her is a video of the noise (it's dark so you wont see anything but sound is ok.) Normal engine noise is up to 29 sec, then I put the car in drive and you can rattling noise start. [video=youtube_share;-DYAFR7PLq8]

Hi All, You may remember my thread a few months ago when I joined the forum (http://www.300zx.co.uk/forums/showthread.php?171494-Hi-from-Berkshire!) , when I was looking for a decent TT. This weekend I drove a few hours across to Wales to meet up with Dean (Sir Charles) and pick up a Slicktop that needs no introduction on the forum. The car is a credit to him, and its former owners and I hope to keep it just as fresh and tidy and keep adding to the spec list. Dean is a fantastic bloke, genuine and friendly and I would not hesitate to do business with him again. This is my first 300, but I have previously owned S14a and S12 Nissans, a X308 XJR…

Hi, just found I forgot to fit these and now cannot find the old ones..... Anyone know if they are just standard 2.5' 3 bolt ones? I need to get some tomorrow...... And was going to pop down to local motor factors and don't want to have to jack up car and remove decat pipe for a template.... Cheers.... Russ

http://www.ebay.co.uk/itm/nissan-300zx-3-0-v6-engine-uk-twin-turbo-model-/111184138345?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Model%3A300+ZX&hash=item19e3175069 Found this and thought someone may get a bargain for parts or to build a nice forged monster.......lol Wish I could afford it......

My old Zed did not have the HICAS elimination but this one does - it was like that when i bought it. I was just wondering (after watching that 300ZX video that princeking uploaded) why is the HICAS eliminated seeing as it looks so clever in the promotional vid. Nissan must have gone to all the effort of fitting it for a reason one would think. Then we take it off again? Rich

came across this thought it everyone would enjoy it

Ok the car is Squealing on start up.... and its doing my head in lol... Is this down to warn or loose belts? Bear in mind that the car was sat for a year before i got it, so if its the belts then i best get them replaced lol.. help and advise is always greatly received.. CheerZ Neil

Dont know if its a common fault or maybe im missing a bit of trim , but as the heavens have opened , when opening the boot fully water falls down side of the bootlid and right into the rear speakers... not ideal, I now obviously dont open the boot fully to avoid this but telling the misses this seems in vein as it just goes over her head. Is this a common problem and is there something i could cover the speakers with the avoid this, or is it just a case or never fully opening the boot? Thanks in advance Alex

Have done a few tech posts concerning recircs leaking via the diaphram internally giving poor boost issues etc. well this tech concerns a spin on that, whilst looking for the cause if a boost issue in a zed in the work shop the normal boost leak test showed a very large leak at the front under the afm. Luckily the zed in question had an induction kit fitted so was much easier to see what was going on. Initial thoughts were one of the pipe cuffs to the recirc was the issue as I could feel the air escaping in that air with my hand wrapped around it and inflating the inlet pipework. However once I had better access I could see the cuffs were ok but the metal vacuum in…

I have just ordered some ate super blue racing brake fluid for my two z's anybody else running this stuff, seems to get good reviews and recommended in driftworks etc got it cheap too from eurocarparts discounted to £10.26 a bottle from the average £15 a bottle

Is the main engine loom the same on the auto and manual cars. The reason I ask is because there is part of the loom inside which goes to a connector block, which I guess probably heads back to the key ignition switch. I am just asking because I am reshelling from an auto converted to a manual to a manual? Thanks gents!!!!

Im looking at getting 19s but not sure what route to go down ,ive found the wheels I like but don't really want the kenda tyres they can supply not sure there any good so im looking at getting the wheels first and sorting the tyres out after the offset of the wheels are 25 fronts and 35 rears,the tyres they have spec for the wheels are 245/35/19 fronts 275/30/19 rears ive had a phone about on half decent tyres and most are saying they only do 275 /35/19 would this size rub the rear arch ,im running standard shocks ,should the fronts run 35 and rears 30? anyone out there got this set up ive found a set of tyres called Achilles anyone come across them and if there any…