General Discussions - 300ZX Related

Saw you go past twice love the wheels, body work looked like your working on it.

Hi Anyone any idea what this clip is called or where i could get one from before i ask Nissan? Its from the inside of the front 99spec bumper. Its the little clip that holds the black fixing bracket onto the bumper.

Hey guys, I've run my MX5 with a welded diff for over a year now. I love it, it makes the car so much better handling in every area and situation in my opinion. Now it comes to the 300... I've had it sideways a couple of times now, initiation is good, keeping it is less easy than I'd like, and exit is f**king diabolical. Mine is the manual LWB TT, so it has the 3.7 VLSD as standard. When leaving a drift it acts like an open diff, which is every bit as dangerous as an open diff. I'm seriously considering welding it unless you insanely knowledgeable people can back up my fears. The drivetrain can handle it effortlessly, as can the quality of my welder'…

hello today i swap my serial turbines to t28 and the problem is that not blow more like 0,7bar I was checking the pressure test and is ok no leaks so i decide disconnect ebc and blinded hoses from actuator and still is same problem what you think actuators are broken? help if eny1 know something. Regards Pit

Hi I looking for a rear quarter drivers side pannel for a z32 and the strip between the bumper and rear lights is damaged aswel looked everywhere no luck can an6body here help cheers

Hi I looking for a rear quarter drivers side pannel for a z32 and the strip between the bumper and rear lights is damaged aswel looked everywhere no luck can an6body here help cheers

a mate is looking at buying this, but its bit of a distance and wants to make sure about things first, ive had a look in the forsale section, but cant see it, so not even sure if the owner is on the forum, if they are and registered, i will remove the link, but any advice if anyone knows anything about it, would be nice. unsure on if its turbo or not http://www.ebay.co.uk/itm/181301560541?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2648

found this on ebay, http://www.ebay.co.uk/itm/150680249941?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 anyone else used this kit, some parts are genuine, but worried the rest might not be up to the job?

Hi all. Just wanted to say thank you to Jeff TT for sorting the parts for me ;) . And all the rest of you that have helped me with my zed in the past few months. now she's had her cambelt ( pulleys n tentioners) and water pump and oil sender fitted, hopefully now i will be out of trouble for a while and have peace of mind. But i still have this oil pressure problem, even with the new oil sender unit, im still getting a reading of just over 4 when started from cold and then drops down to just above the zero. is there something else i can check? or is that just how its meant to be? oil and filter was changed at the time of the cam belt. lookin…

just saw this on the Oz forum... :blink: http://www.gumtree.com.au/s-ad/grafton/cars-vans-utes/1989-nissan-300zx-coupe/1035980504

Hy! I am rebuilding a friend Nissan, and I have this question... Which clearance is the best for a car that will drive max. 1.1 bar (OEM turbos). http://imagizer.imageshack.us/v2/800x600q90/27/914v.jpg I need to install with 0.0045 or 0.0050? Thanks

Getting the right oil for gearboxes, diffs and transfer boxes can be tricky, so please ask here if there is any information that you need. To help us to give the most accurate advice possible we do need some information about your car. e.g. Make: Model: Year: Manual/Auto: Performance Modifications: Driving style: (road / off-road / track etc.) Any other information that may be relevant: e.g. approx BHP if modified, any transmission problems What recommendation are you looking for? Gearbox, diffs, limited slip diffs, transfer boxes etc Any oil we recommend is available to buy from us (if you would like to) for delivery throughout the UK and many d…

After get the zed I have not had the time to even think about her. So after being sat for a while I started her tonight. Flat battery but started as soon as she was hooked up. Let her sit and run but got up to temperature quicker than she should (10/15mins at idle) Kept an eye on it then the fan sounded like it was working overtime. Let her keep ticking for another 15/20 mins and maintained temperature at just under halfway but leaked coolant somewhere from the back of the engine (can't see to much due to the dark). Since I got her the heaters never blew out hot air but did the easy check the footwell but bone dry so likely this leak is the cause of that? A…

Does anyone know if you can get a steering wheel boss for an Na with an airbag? I want a different wheel but find a boss anywhere, don't want the airbag either.

Like a plonk I just bought the leather armrest covers didn't realize they didn't come with the base to fit to. Now where do I buy those or find them. Anyone?

January deal for you guys, those pesky little plastic quadrants that break and allow the key barrel to just turn and not lock or unlock the door now in metal. £14.99 per pair delivered to your door You got just love the internet eh? Just follow the link to purchase: http://www.ebay.co.uk/itm/Nissan-300zx-brand-new-lock-hanger-mech-/131097293346?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3ANissan%7CModel%3A300+ZX&hash=item1e8601f222 Jeff TT

Can anyone please advise me why I can't get any hot air from my heater. I've been working through some of the faults on the Z over the last 12 months and I'm left with the heater and the rear de-mister just not working.

Nissan isnt thinking of producing a new z it IS GOING TO BE PRODUCING A NEW ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ. Next Nissan Z will be smaller, lighter Nissan is reportedly hard at work on its next-generation Z. According to Inside Line, designers are already churning away on a concept version of the 2015 Z that may bow at the 2014 Detroit Auto Show. The report notes that Shiro Nakamura, head of design for Nissan, says the new Z will be both smaller and lighter than the current 370Z. The model will also be geared toward a wider audience, and Nissan may be investigating the possibility of ditching the tried-and-true 3.7-liter VQ V6 for a turbochar…

Hey pal, can i still get those gaskets from you? as i managed to cancel my order today :)

Only seen from front as passing... was nowhere really to flag down or spin around, just about managed a flash and wave. Nice Zed!

http://jalopnik.com/nissan-is-probably-cooking-up-a-new-turbo-z-1504981955

ok a 18 ich rear wheel that's 12 j wide with a off set of et3 how much would this stick out ? I know the body will need work just want to know who much it will stick out

Hi all, I'm in the process of developing my own Brake Master Cylinder Brace because I've noticed a lack of availability of these things in the uk. I've heard great things from those who have fitted one, as it eliminated the flex our cars suffer from when you press the brake pedal. I'm hoping to get something smart made up. I'll keep you updated with my progress, if it works out well I may well get a batch made up if anyone on would be interested. Damn the lack of parts here in the uk!

Bored of mine now want a change. They need a refurb anyway. Can anyone photoshop my rim dishes black for me???

Mine is old and orange and cracked? Anyone have One on a zed they are Breaking? Hmmm maybe I can source one from a zed shop.