General Discussions - 300ZX Related

If I buy the reg no. B18 ROY, and stick a little bit of plastic on the eight to resemble "g". Whats the worst that could happen legally with the plod? Apart from being flashed by suspect men in leather caps etc. Timmy here u go mate another 1000 posts for u!

i keep seeing a black z with a private reg like b sard parked outside the town hall in manchester this wouldnt be anybody on here by any chance would it

I've got the following bits for sale, all are direct from Nissan, still packaged, and unused. Prices include postage, and preferred method of payment is via Nochex (www.nochex.co.uk). 22060-30P00 - Knock sensor - £110 24078-30P00 - Knock sensor sub-loom * 2 - £15 ea. *sold* 22670-10Y00 - Fuel pressure regulator - £49 *sold* *sold* 22675-10Y00 - Fuel dampener - £49 *sold* 92400-30P00 - Heater matrix hose - £8 92410-30P00 - Heater matrix hose O/L - £8 *sold* 11810-40P00 - PCV Valves - £8 the pair. *sold* *sold* 11826-30P01 - PCV hose (drivers) - £7 *sold* *sold* 11826-30P11 - PCV hose (pass.) …

Thankyou Turbo Technics for finally shipping my breather kit! If you ain't got it yet I would highly recommend ringing a nice chap called Bill on 01604 705050 You won't get to actually converse with the guy but after a few attempts and being fobbed off by the receptionist, miraculously your long overdue rubber hose collection will be dropped from the beak of a stalk as it flies over your area!!! LOL

Has anyone ever replaced the drivers side PCV with the engine still in? The passenger side was a doddle by I just can't work out how to get at the driver side one.

ROFL! Come on, where are my congratulations? ------------------

Hey guys have found the anwer!! whilst working in a dealership today, if you disconect cable No.?CENSORED? at the ecu and the blue one to the ?CENSORED? the in built access mode of the eprom allows for 40+mpg and +100 bhp with no other mods, takes 2 minutes and cost nothing and if done before midnight tonight all insurance companies will reduce your premium by 70%!! plus the value of your car will increase by 50% Oh by the way, sorry guys only works on auto`s. Jeff TT (Wooohhh done mine already) [This message has been edited by Nissan Uk regional administartor (edited 15-02-2002).]

http://www.itwfoamseal.com/automotive.htm Anyone had any experience with this sort of stuff? Heres the blurb: ITW Foamseal's AUTOSEAL Automotive Sealant Foam ITW Foamseal's AUTOSEAL is a two component foam kit that has been specially formulated for automotive aftermarket applications such as chassis stiffness improvement, sound damping, and reduction of vibration and infiltration of air, water and dust. Featured in the June 2000 issue of Sport Compact Car Magazine in the article entitled Nissan 300ZXTT, Part V, More Suspension Tweaks and Tales of the Magic Foam (pages 236-242), AUTOSEAL (HandiFoam 11-22) significantly improved the chassis stiffness of t…

Right this MUST belong to someone on this board. Very Clean Red G*** SGO Auto Zed, with Zed badge on bonnet parked outside Speedy's Cafe just off the Euston Road. Come on, make my day, let m,e know it belongs to one of you guys. ------------------ John (S14a 200sx)

http://www.300zx.co.uk/rides/nitropow/

I have finally made up my mind and am going for the above bumper. There are a few other guys also interested and I am just posting to see if anyone else wants in before the order goes ahead. The deal is: Bumper, side lights and standard fog lights (current jap spec ones will fit fine) for £548.50 inc vat. You may order without the fogs if you wish and you may order the new side skirts and rear spoiler too. Best thing to do is phone Mike at MJP on 01277 374201. This doesn't include the mesh but you be able to buy that locally far cheaper. If you want some pictures here is Warren's thread http://www.300zx.co.uk/forums/ubbforum/Forum1/HTML/00458…

When I changed my spark plugs a few months back I took off the balance tube so I could get to the back ones. I seemed really dirty inside the part it goes onto. Is there any way you can easily clean the inside?. Also There was nothing sealing the two joins, no gasket or O ring!!. Would this mean a potential vacuum leak?. Does this effect performance a great deal if the balance tube has a leak?? any thoughts??? Cheerz Simon H

has anyone got the two lower intake(throttle) hoses going cheap? when I took my engine out they were introduced to stanley, so I need two more!

Hi fellas! Yep, I got down on one knee in the middle of the B'ham Botanical Gardens - completely took Fiona by surprise - asked if she would do me the greatest honour of becoming my wife, and with big tears in her eyes she accepted! Call me a hopeless romantic but I couldn't be any happier at the moment. (I could be but that would mean my Zed actually running propperly and cheaply ... yeah right!) Just needed to share this with my extended Zed family! Take care and be safe! Danny

sorry if you received in your inbox this morning. be sure to sing it to the tune of I will survive!! MALE VERSION First I was afraid I was petrified At the ugly slapper that was lying by my side I would've drunk a little less, I would've tried to keep my head. If I'd known for just one second you'd Assault me in your bed. I tried to go, walk out the door But you've been sitting on my legs and I Can't feel them anymore And now you're sitting on my face, my nose has vanished - not a trace, I only hope that you're big knickers aren't Made of liquorice lace I want to go, I've got to leave Bef…

My Zed is unfortunately having problems at the moment. They are very similar symptoms to what Chris C is having whith his car. Where in the engine is this PTU thing so I can see if has a new one already or not?. Chris C, if you are going to get a new one I perhaps we could buy two if mine is the older type PTU!!. Let me know M8. I would greatful for any help on where to find this part guys. Cheerz Simon H

No, no, no, not the f$%^king breather kits, the manual gearbox from Kash. I will be collecting from MJP damn soon. Which means that a) other peoples kit should be on the horizon too, and b) in the not too distant future one low mileage auto gearbox par excellence, complete with fast road rebuild and additional oil cooler will be up for sale. Form an orderly queue please ! I think Timmy Turbo and Dave Marley(?) have first dibs and I'd guess now that Tim has had his box fixed then Dave is at the head of the queue.

As you may now, my Z is up at PPS, where Pete is fitting a body kit & doing a full respray. Here's how it's going so far:- Can't wait 'til its finished! Dave

As some of you may know, my Z is in at PPS where Pete is fitting a body kit & doing a respray. I suppose this pic should be named "work in progress!" It'll all be worth it in the end Dave [This message has been edited by DaveW (edited 14-02-2002).] [This message has been edited by DaveW (edited 14-02-2002).] [This message has been edited by DaveW (edited 14-02-2002).] [This message has been edited by DaveW (edited 14-02-2002).]

I've just become the owner of 1989 TT import. It goes great, the engine's a little bit rougher than I expected but it has done 80K miles. However i've just filled the tank again after using a full tank and I've calculated the MPG, after picking myself off the ground and checking my calculations again I got a figure of 12.5MPG. There's no obvious signs of a petrol leak although I did notice a petrol smell from the exhaust. My first guess is that i'ts running mega rich hence the engine roughness. Any ideas how to where to start anyone. P.S. I also checked the ECU and there are no error codes.

Love ya Big Boy! - Thinks Macca should take a Polygraph about his high post counter reading! ROFL -

Any one got any goodies (boost controllers, leather seats,ice equipment etc) they want to swap for zedworld services? Jeff TT www.zedworld.co.uk

I would like to know if there is a flatulent person employed at dry-roasted peanut factories whose sole job it is - is to fart into the packets before they are sealed up. ?? Because I have it on good authority from the Range Roverer Madam Turboid that you, my son, would be well suited ROFLMAO!!!

Timmys posting or Tooley's shit?