General Discussions - 300ZX Related

Will a series 1 twinturbo diff fit into a series 2 car Both twinturbo mine has elec hicas and the seller says there an oil feed on the back of diff for hicas I want to weld the spare for drifting and switch them for trackdays Will the diff and casing be a straight swap???

Driving around Wilton Avenue in Winkney farm near Hampden Park yesterday and saw a Red OEM looking ZX. Very nice, although the paint looked a bit faded? I was doing "Loops" in my bus so I managed to get a 2nd and 3rd look later on my 2nd and 3rd loop! Was it you? Thats 4 ZXs in Eastbourne (plus 3 in Hailsham) now I know of. We might need to start an "Eastbourne and Area" cell in the South East division!

These gems do pop up now and again and what a bargain. What do you think? http://www.pistonheads.com/classifieds/used-cars/nissan/300zx/nissan-300zx-twin-turbo-targa-top/3921666

Car went into the garage today but as usual nothing goes to plan lol. Already got Nistune installed previously so today should have been the aem upgrade fuel pump and yellow 555 injectors. But, everywhere I try doesn't have a new upper intake/plenum gasket part number A4033-30P22, going to try MJP tomorrow as my last hope, was closed today by the time I called. The injectors need some kind of different connectors I believe, the guy mentioned some kind of Denso bottom feeder thing but I really don't have a clue lol, they are trying to source them, but can anyone here offer help?

I ordered some new custom seats today from Corbeau, After much debating back and forth to either keep the stock leather seats or change them for a more modern type, I finally decided on the Corbeau RRS seat's. A bit more than what I originally wanted to spend but after a lot of research in specs etc I decided these was the ones. Full leather with dark grey stitching with added adjustable lumbar support. They should look similar to these!

Anyone bought alloy pulleys from to fast to cool was thinking of buying their 4 piece set

The Competition for April is now open in the Competitions forum; http://www.300zx.co.uk/forums/showthread.php?180745-COTM-April-2015-Entry&p=1864304#post1864304

Mot today Now looking for a replacement drivers side cat Looking on ebay there are a lot of people selling new ones for around £130, however they all say .. All European (EU) cars (outside of the UK) must be fitted with a Type Approved catalyst, and all UK cars registered after March 2001(Y Reg) require a Type Approved catalyst.For this reason we will need your vehicle registration number before we can process any orders for catalytic converters. If we don't have your VRM we will have to cancel this order. Is this some sort of scam? Why do i have to give my registration to buy a cat? Surely if their product is legal then it doesnt matter what car i fit it…

Has anyone heard of the rear subframe not sitting central on the subframe bushings? I've just fitted new wheels with more offset than my previous set, so it's shown up the problem. One of the rear wheels is slightly further out the arch, noticeably so once you've seen it. I have adjusted the camber in slightly on the one that is further out but it now has more negative camber than the other side, yet is still poking out. Any ideas? Anyone had this before? I don't have adjustable lower arms, so it can't be that, only adjustable camber arms on the rear.

Common dan. Weres the pics. We know you picked her up today. Get you pics up dan.

sard 850's shipped with about 3k miles. Or deatschwerks 740cc 500 miles if that. Whitch ones to go for and yes genuine reason for sale. This guys gone for the big numbers .and what monies should i be parting with.

Beth tells me she saw a blue zed with rear end damage on a trailer on the motorway. Anybody on here ??

Hi all im new here my mate is building a 300zx drift car and has stripped as much off the car loom as possible and kept the important wires. He has given me the task to wire the indicators and hazzards off a toggle switch. As i dont have a wiring diagram if i was to sourse both front and rear indicator bulb feeds can i apple the below instructions? or does anyone have any ideas as to the best way to accomplish this? i have a three way toggle switch spare ( on-off-on) and a two way one ( on-off) Many Thanks:

Good evening to you all. As the title says my fuel pressure regulator has now started to leak after being sat up for the winter. Is there a way people have got over this, namely replacing it with a OE part or with some thing after market. Any help and advise on this matter would be great. Many thanks.

Just brought a centre arm rest of ebay tried too fit it to my swb but it's too long didn't realize there was a diffrence between swb and 2x2 there are loads of leather covers on ebay I surpose they only fit lwb models . I've have a black leather 2x2 arm rest if anyone want one .

Hi guys Just thought I would post this up if anyone in market for front brake discs? Might help some out. Clark Motorsport near me having a sale on DBA brake discs on their ebay store due to fire damaged stock just the packaging is smoke damaged and I got a front set for £89 delivered which I thought were a bargain!? Ebay item number 161501160882 ( phone won't let me link) Tried to get a set for 350z but they only had non brembo discs Sorry if this is wrong place wasn't sure we're to post it, mods feel free to move if required.

Zebedee :: 1999 Nissan 300ZX Twin Turbo Version R (2015-04-01 13:32:58)

Hi does anyone have for sale a rear tailgate for a 1997 300zx twin turbo 2x2 or a screen to fit one as I cannot find a replacement screen Thanks Richard

i seen an online article somewhere last week about a girl called Amy Slade? with a beautiful pale blue convertible Z, i cant find the article now, the car looked great imo, anybody know it or has seen the feature, could you put a link up please

Just out of interest, what happened to the zed that got plenty of magazine cover, green with cream leather interior, never saw the rain, won awards etc... Cheers

You moved to France bud :whistling: http://www.ebay.co.uk/itm/Nissan-300ZX-Z32-VG30DETT-Custom-tune-chiptuning-chips-/301579467696?pt=LH_DefaultDomain_3&hash=item4637897bb0

Has anyone here used the upholstering from this eBay store? From what I've read they're quite a good quality and they have lots of stuff for 300zxs! http://stores.ebay.co.uk/TOP-GAITERS-BOOTS/NISSAN-/_i.html?_fsub=1118623016

Just returned from Six Mile Bottom, Cambridge! Had to go there to pick the cat up from Dick Whites. Cat had undergone surgery last Wednesday! Here is the Z back home! Saw a nice 370z on the M11 on the way back!

Hi guys I recently bought my 300zx tt manual and have been slowly trying to iron out all the niggling faults. The car vibrates through the body of the car and gets quite severe at times. I got car on ramp and checked for sticking brakes, worn bushes, play in suspension but from what I seen looks ok. Also checked gearbox mount which also looks good. Decided to check the prop as guy I bought it from fitted a paddle clutch and thought the prop being removed never got fitted correctly. Checked the prop for play in bearing which has no play, totally solid, I did notice the prop was sitting low in the bush housing. Took the prop off tonight just to d…

Last year I purchased some used coilovers and the rear passenger side was noisy, it rumbled constantly and clunked on bumps. I have since replaced them for a new set, I was surprised to hear that the clunking is still there with the new coilovers, I have done a search on google and passenger side rears do tend to be noisy on various cars for some reason? What should I be checking for on my Z? Thanks, Dan