General Discussions - 300ZX Related

My radiator fan seems to be running constantly, what checks should i do? How do you remove the E.C.U. Water Temperature Sensor, do you just pull it? Cheers David

following me (silver zed) down the A259 to bognor :xxx:

Just secured some stock replacement rear light units to replace my cracked and chipped current ones. Ive seen this conversion kit.. http://www.directcircuit.com/ is there a UK distrubitor of these orI is there a way can make my own?I know im being tight fisted and not paying the 38 dollars lol but i fancy a challenge. Ive heard you can use the material srip light covers are made of for the internal lense.What else do i need?

saw a blue zed driving into grimsby today around 12.30-1.00

As above, Does anyone know the part number for the pair of these as ours are well and truley buggered? Thanks Rob

Ok, today I was looking closely at my rear stock spoiler and found that it is not actually cracked in any place and is in pretty good nick. Only the paint is flaked in places. I used a scrapper and got a small area of paint off. Now the question is how do I strip the entire paint of the spoiler with ease as using a scrapper will take me a few years ? I am hoping to strip the paint and repaint the whole spoiler afresh by myself. This is my cheapest option at the moment. Any ideas guys ?

Hey guys could anyone post a pic showing how they cut the alcantara to go round the corners - rear top is the worst as it's most visible. Just struggling to get it round the radius without looking rubbish!! cheers Rich

just wiring the airhorns up and noticed that there is a relay and fuse not in the fuse box under the bonnet. do they need to be in. missing: sub fan relay, and the shift lock fuse. do they need to be in there then??

Has anyone here know or has done replace fuel tank? Reason ive got uk tt, its had a rotten pipe that feeds the tank(where you fill it up~)So after ages ive taken the holed rusty pipe of,long gone whats left in bin,Got another me told there the same,ive tried all blxxdy morning to get this pipe on just wont go, :headvswal Now before i take the whole tank of i just wanted to know are they the same SWB AND UK :(

i'm sure my fuel leak is comming from this place what is it?

Have done search after search but i feel my searching skills are crap today. Just wanted to know how much is needed for and oil change?? will a 5ltr container be enough?? cheers Mike

i founf that it was a fuse. so i changed it. now everytime i turn on the headlights it just blows another fuse? can anyone shed some light on it cheers

gonna change the clutch in mine shortly and need advise. do i need all this when ordering bits?? OEM friction disc OEM flywheel ( i have been told told one needs resurfacing when fitting new clutch) or buy new flywheel throw out bearing pilot bushing rear main seal clutch fork pivot ball clutch fork rear transmission seal and if broken/not working reverse switch by replacing the ancillariess i suppose im doing good preventative maintainence. is the flywheel resurfacing needed when fitting new clutch or shall i just get a new one at same time?

As above does anyone sell these?

Look at this first post... http://www.300zx.co.uk/forums/showthread.php?t=67011 Especially "Rover 416 !!!!! - I was in a place called Bridgenorth, about 15 miles from home when i came across this tosser chav with his 12 year old girlfriend in the car with him and he kept swerving over the road so I couldn't pass, so I got in front of him and jammed on the anchors and made him go up the kerb - JOB DONE !!!!! went back that way home later and guess what ??? The car was there on the side of the road with a fooked wheel........ 1-0 to me then !!!" Makes me almost glad I don't have a zed, to be associated with stories like that :( I was gonna post a scathing re…

Started my N/A up for the first time in three months and it sounded like it was missing a few cylinders does anyone think this is any thing to worry about something died? or just where it has not been used for a while?

Doing a few jobs today and one was to change my steering wheel. Now have managed to get the 19mm socket off with a bit off force but for the life of me cant get the wheel off. :headvswal As far as I can see there is nothing else holding it in. Any tips would be appreciated. cheers ronnie

hmm im pretty much inept with mechanical things, iv looked at the engine by numbers thingy, and well it says resevoir (#3) so i take it thats where i fill it up? does the cap just unscrew? just there a pipe/lead sticking out of the top of it. hope this sloves the hicas, light goes out going downhill so i persume its this.

HI All, Ok took my original Tape player out today - already bought my cd player, so got the iso connector adapters and the arial - 2prongs into 1 thingy and great - all connecting fine.. Go to turn on the CD player aaaaannnddd.........nothing. :rolleyes: hmmm so i refer to the ..da.da da daaaaaa, manual (!) and it says to disconnect the battery - whoops didnt do that, so i disconnect the battery first and try again and still nothing, i didnt think it would make any difference tbh, no im thinking maybe ive blown the internals of the Cd player by not disconnecting the battery first? anyone had this before? Thanks Ed :duffer:

I was attempting my first service on the zed today, when i started having a few problems. firstly the spark plugs to a loooooooooooooooooooooong time, eventually done. Secondly i have no idea how to get the fuel filter off.Do i just yank it off the pipes, or what. Thirdly i was intending on fitting my induction kit as i thought it would be straight forward, however the instructions say that i have to remove the front bumper. Is that so. How hard is it and how do i do it??

how much boost does a Z run as standard? how much in safety mode and how much horsepower would you expect from running 14psi of boost

saw a silver zx is clun earlier today about 1ish, was sitting outside what looked to be a garage. with nice rims really liked them. was wondering if it was someone on here?????? :)

I have uploaded some pics to my rides section today - but when I go to look at them I get a new window open with a box with a red X in it. Can anyone tell what I'm doing wrong ? Cheers

I removed the blanket from my bonnet on my old TT to help rid some of the heat quicker. Was gonna do it on my new one too, but its a modified bonnet, got a bulge etc on it. Can the heat damage the filler? Would it be safe to remove? Dont want to remove it all to find out when engine gets hot bonnet bulge cracks etc.

:mad: ive spent the day putting in my new components and amp but the amp just keeps blowing fuses. any ideas?? cheers in advance