General Discussions - 300ZX Related

http://cgi.ebay.co.uk/Nissan-300zx-300-zx-Ignition-coils-ignition-packs_W0QQitemZ110081120386QQihZ001QQcategoryZ10402QQrdZ1QQcmdZViewItem view the 'small print' at the bottom - shows that the auction is for ONE coil pack. oh, and check the delivery price too! :dance:

http://cgi.ebay.co.uk/NISSAN-300zx_W0QQitemZ230082305773QQihZ013QQcategoryZ18238QQrdZ1QQcmdZViewItem :xxx:

Someone needs a reality check. http://cgi.ebay.co.uk/NISSAN-300zx_W0QQitemZ230082305773QQihZ013QQcategoryZ18238QQrdZ1QQcmdZViewItem

Can anyone confirm I have the right part numbers, there are loads of different ones. 91/92 'J' reg Jspec TT manual VG30DETT 22690-30P00 22690-40P10 I think they are right but whats the difference, I thought they were the same sensor :confused: CheerZ Paul

seen in shenfield station car park 24th Jan Looked like a blue or black car think it was jap speck by square front number plate didnt get much of a look at it as it was dark and i was going past to fast in my train but had high rear spoiler

does anyone have a full ecu diagram for z32 TT (import) its for my alarm bloke. something to do with my remote start/ turbo timer

Hello All As a soon to be father it is time to let the Zed go whether that be in bits or as a running concern for someone. I'm not sure what it's worth in todays market but that what I'm here for, your advice. The spec is as follows: 1990 'G' UK 300ZXTT in AG2(I think) Red Engine Uprated T25 hybrids (Only 2000 miles) Polished Plenum Divorced/Split downpipes Custom built full stainless with 5" tailpipes (awesome sound) Lightweight Flywheel 6-paddle stage 3 clutch Smithy's fuel line kit Nismo 550cc Injectors with new 'o' rings 2nd hand (like new) wiring loom (all connectors are perfect) Apexi AVC-R Boost Controller 3yr old radi…

Ive been Zedless for the last 10 days since I dropped her off with Mickey for some work and she should be ready by the end of the week. Cant wait! RPS Clutch Install (my clutch was fooked and slipped badly) JWT Flywheel Install (heat cracks due to fooked clutch) SGP Underdrive Pulley Install EGR Bypass AIV Removal VVT spring repair (been knackered since July) O2 sensor replace (been knackered for a year) Short shifter Install ...also turns out my bottom+top-end shells had *****cksd so they're being sorted as well. She should go like pooh off a spade! :dance:

Hi Guys!, Well, MR2 Sold for its Asking Price of £2000 So I picked up this Beastie :-D Its a Nissan 300ZX Twin Turbo Fairlady Spec Has a few small things that need attention such as a small oil leak, scratch down the passenger side, but I got it cheap and have the money to spend on it bringing it to its former glory so cannot complain really, it came with 6 months tax and 12 months mot

hi ppl ive just got consult for my car and a usb cable, put all the software and drivers on and i cant get the consult software to find my ecu gettin p***ed off now cant anyone help me regards andy

This....

Another gauge, oil pressure this time and I will be mounting it beside the boost and then a water temp like in the pic below. Don't worry tho I don't likt them all there and will be mounting them differently as soon as I can get my arse in gear.

Got my little parcel back in the post. :bow: If you want to change the locks let me know. Or if you need anything for that window. Thanks Pete :cool:

Dick!! With jam and custard!!! :D

as above i want pics of zeds with the ferrari lights in the back like the ferrari 355 im just getting ideas of how to do my next zed

Silver Zed, really dirty or dented passenger door. Turning off bensham bank (gateshead) at 5.40. I pointed, you stared and drove off? Anyone?

Just spent four and a half hours changeing my Clutch booster OMG what a royal pain to do, I really hop I dont have to do that again, :rant: But on the good side I no longer feel like im weight trainning while driving lol :dance:

First of all cheers to Sarre who plugged his laptop in on Sunday and had a look at the settings. The only problem I have now is the reference for the driven wheels. I never wired it up as SWM1's site I followed the instructions provided with the unit, I bought it second user from a forum member who had a 91 UK Manual Car, mines a 93 UK Manual. So It should be right, but I noticed on sunday night that looking at his various setting on my PC his driven wheels differ on his backed up dat files. This leads me to believe it requires calibrating but I didn't receive the calibration tool. Anyone know how to do this without the calibration tool, as the rear wheels are LSD a…

http://www.nengun.com/ they look cheap dont know how much extra shipping is .

Anybody know where i can purchase replacement sills and rear arches from and roughly how much they'd be? There was a place i found ages ago that sold ford granada replacement arches for £12 each. Just thinking if i'm spending the money getting the paintwork sorted out for the summer i might as well get replacements welded in and save having to do the same thing again next year.

i've fit a pair of dump valves on the pipes at the top of the engine in the pipes. I've removed the recurc valves and blocked the pipes up as told and fed a new vacum pipe to the new valves. I've got no boost leak and they are'nt seized can someone please post a picture of top mounted dumps and the vacum pipes. Thanks in advance. (HELP)

Hi guys, Just a quick one. I have an intermittent problem with the speedo. When I first start up the speedo doesn't work, however after about 10 mins, it flickers, then comes to life. it's almost as if its "warming up" with the car. i was wondering if this could be a loose connection? if so, where do i look? Oh, btw, the cars UK, so its not the "speed convertor".. Cheers, Tony

Yesterday and the day before, Spotted a burgundy z with a silver drivers door :wack: on uxbridge road, acton high road. Just wandering if anyone from here.

at last I have found out what bodykit my import has its an Abflug type 4 the same make but slightly different model to the Knightsbridge zed