General Discussions - 300ZX Related

Just been wondering.. how does the AEM Plug & Play Engine Management System from stillen work?? Lets say the car is standar with 300bhp. Can I increase boost with that instead of buying a chip? And if I change to some aftermarket parts later on.. can I make a new setup with.. lets say.. 555cc injectors and new intercoolers and so on without replacing the chip? As I understand if I have an AEM then I don't need to have a chip from JWT or any other...

What the Main reason and advantage of mounting top feed injector's into the Throttle body Boost hoses? i know there is an advantage to high rpm power? I was surprised to see this as you can get upto 890cc injectors for these engines? Touch me for a Link > :D

Finally got it all plumbed up and tested this week :) Obviously that's not where the tank is staying!

Saw you at the roundabout from Glenfield to Fosse Park about 9:30 Saturday morning.

Anybody out there know what fixings are used to secure the brake light into the rear spoiler, been trying to remove the blank panel to install the brake light assembly without much success :( is secured by screws or nuts !!!!!!! Cheers Al :cry:

I'm finally removing my plenum to replace my leaky injector O-ring. However, I'm having real problems getting the metal retaining clips off which hold the injector connectors in place :rolleyes: Anyone got any hints or tips on this? I don't have access to a pair of dental clips (WTF are they?) as detailed in the TT.net how to :tongue: CheerZ in advance for any help! Steve :)

hello where can i get a set of those nice chrome rings cheap that go in the speedometer? also is it hard to get them in? i know how to get the speedometer out, but does that black part come out too?? so i can put the rings in easy? thanks

help required. no power to wiper and air con switch assy . had a intermittant noise from osf lower footwell. could this be the time control unit ? (next to fuel pump relay) thanks in advance

wel it looks lMOT day again. wish me luck

Have a good day matey. :duffer:

anyone in scotland willing to install my apexi avcr boost controller will pay expected price just need someone to do it all the places ive called cant do it or the waiting time is too long pm me if interested

Happy Birthday mate. Have a good day!! :duffer: :duffer: :duffer: :duffer: Looking forward to catching up soon mate :D :D

Possibly ! Just been speaking with Jeff at Zedworld tonight and he's told me about a SWB TT Manual in Black on a H reg that has been nicked from there early hours of this morning. I say possibly a fellow Zedder being involved is because of the knowledge the culprits had of Zeds and their workings in general. For reasons i can't mention, this SWB was boxed in with other cars and it was disabled by Jeff personally as well as fitting a sterring lock. The culprits gained access to the blocker cars BUT removed a particular part from one in order to fit to the SWB in order to start it and then drive it away. Your average car thief am sure wouldn't know what parts were…

My N/A import uses loads of fuel when the ambient temperature drops below about 12'C. I lose about 40 miles per tank full, and the idle stays high for about 4 mins on cold start ( up to 2k!!). Does any one know the resistance readings of the ecu temp sender, or is this normal? I've had over 20 cars in my time and never noticed a different mpg between winter and summer this extreme.

has this car gone because my father lol is intrested in buying it

One tuesday early morning Silver A259 towards Littlehampton 9 ish in the morning and on wednesday, about 5 ish A259 Littlehampton going towards Bognor /climping, Black with Apexi stickers on wings and big exhausts, i was the nutter in the white transit van flashing u in the traffic.

I took the car out on the road yesterday for a small ride. My engine has been fully rebuilt by myself and the help of my friend who is a mechanic. I've forged Eagle rods, toga performance bearing, and a second hand for a UK shop crankshaft. The bearing i was using were std and i did 300kms without any problems. Yesterday i raced a audi RS4 (I won :dance: ) but then i heard that my bearing were gone. I took of the oil pan today and found some small particles on the oil pan and a slightly damaged bearing. I haven't took of yet my main bearing but i think the particles are coming from this one. what can cause bearing to go? How to know which …

hi again does any one know how i can get hold of the booking form for the 3rd of june at silverstone cheers

:wack: :cool: :dance: Touch my banana :D

Hello everyone. Need a bit of help with locating front fog lamp lens for my UK spec 91 300zx. Glyn Hopkins at Watford have tried everything they can to find even a part number for them and thought they had the problem solved when a jap version came up as being the right part only top find the fixings which are two screw fitments to the left and right of the lens were different. So between us we are a bit lost as to where we can get them. Any idears, I only want new rather than off a breaker. Appreciate any help......

no probs now thanks Mr F for your reply ;)

happy birthday bud, hope ya have a goodun, will be having a few tonite myself :duffer: :duffer: :duffer:

Is this a members car ?

i used to have the site address for instructions on how to find fault codes and a list of the codes and the meaning im sure someone out there can help me as i cant find the info i need on the web. its been two years since i last needed such info and through it away when i sold my last car thanks

had the oil changed today and no more rattles, gave it a good 10mile drive, perfect the juddering turned out to be a loose connection on one of the coil packs so that didnt even need changing total cost = 30quid so relieved