General Discussions - 300ZX Related

Hi peebs. Now I have a set of wheels for my car but im not sure if they are going to fit. The rears have 285 with tyres which i think is just over 11 inches. I know people have these so that by itself would not be a problem. now here is the main problem... they are 100pcd. I have with alot of searching found and adaptor that will convert my 114.3 hub to 110pcd wheels, but its 1 inch thick. Now added to the fact these wheels are wide, does anybody think they will fit? Here are the wheels by the way. http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140110621022 I know most of you hate 3 spoke wheels but i like em and they have a really nice …

hi i have a 92 zx tt j spec and when i drive it vry close or too the rev limiter it missfires and goes down a cylinder or too for a few sec,s and loss,s a lot of power till it clears out has this happend to any one be for ? ? ?

Driving my newly revived zed home from the west to Bath this evening i was struck by how much i still have to do to get it to feel right. I drive a new Mazda 3 everyday and up to that my zed feels like driving a flat bed coal lorry! However as the sun broke thru the gloom and I flashed past Blagdon lake with that exhaust note and everything rattling I could forgive it everything, I'm deeply smitten! oh god my wallet hurts! Rob ;) ;)

My drivers seat wont recline the back? switch dont work! other switch works fine! Fuse? wires :confused:

Has anyone seen this.....I have had my car for a wee while now and I just pulled this out to check what it ACTUALLY said... ... .. .... . .... Man, it looks like a comic book!!!

I am not sure if I have a wharped disk or a suspension problem. When I brake at low speed I get a vibration through the steering wheel and the car pulls to the left. If I brake hard at higher speeds the vibration is much worse and the car dosen't seem to want to stop. I have a ful set of R33 brembo callipers, slotted and dimpled dosks and yellow stuff pads. I have adjustable upper arms and tein street coilovers. When we fitted the teins the upper arms seemed to have some play in them. Do I need to change the disks and pads or is it likely to be a suspension problem? Darrell

Who done yours and how much did it cost? Zecentre the cheapest place to buy the leather kits? how much did it cost you to have yours fitted?

what should i look out for when looking at and buying a uk spec 300 zx?? also what is the diffrences in the uk and jap spec so i dont get a jap spec thinking its a uk one as i would like the uk one

Has anyone removed the fuel purge tank???? The small pipe at the bottom of mine has corroded away and the pipe is now hanging loose at the bottom. Have had a look for where it goes once it enters the car body but cant see where it goes off too so am wondering if it can be safely removed and if it can is there a guide to doing it properly...

Just drove past a black zed in Matlock Bath, we were stopped at the lights, didnt see you until driving past as I was singing :x:

got a toad alarm/immobiliser fitted now this is not responding so the zed is lifeless :confused: battery ok lights work etc have checked the fob all ok normally I have to press the fob for the ignition to come on but get nothing :confused: any ideas guys cheers

A guy at work has a low mileage 1993 Manual LWB T-bar in gunmetal grey wit h Leather interior... He says the MOT has expired because he doesn't use it, but he is willing to MOT it for me - so there can be nothing wrong with it really.. Now I am saving for my baby that is due in december (the reason I sold my last 300zx) but it is a deal too good to be true.... what do I do? :D

Blast from the past I know, but has anyone got any contact info for the big man from SA. Been trying to get in touch with him for a bit. Cheers,

Who was it then, come on own up. I was driving on the A17 towards spalding / kings lynn at around 7pm last night. Road was wet but not raining at the time. There were about 3 lorries in front of me and I overtook two of them in the vectra before pulling in due to oncoming traffic, White Z overtook all 3 trucks and me! Doing approx double the speed limit and only just made it with about a foot on each side, swerved pretty hard to avoid oncoming car and almost lost it! Nutter!

Right chaps due to billing falling through, who's going to JAE and do we have anything organised for it . it a big event and last year we had a huge turn out.

saw a glance of you in my mirror, but heard you coming from miles away.

hello!!!! i got my hands on some bov's 2 weeks ago but havn't fitted them yet, and the bloody packaging never came with instructions..... ???? i got my mate (who's a fitter) to look at it, but he's a bit unsure as he's never worked a on zx tt before..... can anyone help with where the bov's are located and how to fit..... ta paul

I think this is the driveshaft ? How much are these and how hard are they to fit. Thanks

Erm, as above, red jap import. Full interior retrim Black seats with red centre's (with black "Z") Aftermarket guages around the dash Had dyno reading on display on the dash Registration plate - J494 XBL

Hi there Can anyone help. I have 1990 Zed twin turbo that I bought from importers with head gasket gone. I have totally rebuilt it and it runs a treat. The problem is that on heavy acceleration it starts to hesitate and hold back. If you plant the peddle gently it will creep up ok but not great. If you whack the A/C on its even worse!?! No horrible smoke or noises though. I have noticed that the return fuel pressure regulator on the fuel rail looks new, but when I tested it with a vaccum gauge it doesn't do anything! Could this be the problem? Or is there another explaination? Def think its Fuel related. Please help supposed to be cruising to Spain in it in Se…

How hard is it to replace the steering rack and any idea's on cost or can i replace both boots along with internals e.t.c (sorry if that is a stupid question but its the only part on cars that i have never touched . ;)

What Car seats (second stage), fit into the back seats of a 300zx 2+2 1995? Have to puchase 1 shortly.

Looking at a possible engine replacement,so I'm checking to find out if there would be any major problems fitting a UK spec tt engine into a tt import.

Done about 500 miles in the Z this weekend and I've noticed the car has started making a whining noise as I accelerate. It's coming from the engine bay and sounds just like the noise a supercharger makes :confused: Car is running great but a bit worried what it might be :eek:

I am going to remove my spoiler on my TT and have been informed i will need a replacement piece that sits on the bottom of the boot lid, (black strip) does anybody know where i can get one of these from? cheers