General Discussions - 300ZX Related

Severaly beaten with the ugly stick Nice wheels though.

Hey all My radio is doing strange things, It starts and then dies, if I pull the 10 amp fuse out of the car under steering wheel it comes back to life as soon as I turn it on and start the radio it dies again? If I chnage it for a 15 amp fuse if lasts longer but eventually dies as well? Any ideas?

Just thinking, what performance figure difference's are there between stock and 500bhp z, for example, 0-60, mid range, top speed, is it a huge amount of difference?

Turning into Church Road Hanwell London yesterday evening........?

just bought some of these, should arrive in the next few days, do you have to do that heating up of the original lights to get them off the car, and what do you use to reseal the 99 spec lights so that water doesnt get in

Just been going through some of my old back up discs and found some of the z run so thought i would post up some of the pics :) Mike

Hi! I have purchased a Zed, and when I will go to buy the car, I want buy Wheels alloy too. And, the question, it is possible put the 4 original wheels over the seats and inside the trunk? Thanks:bow:

anyone got a pic of these fitted, do they get rid of the big bush at the front of the car????

Where the seal meets the plastic moulding in the bottom corner of the window has been tampered with or melted on my Z. Is it possible to replace this seal and is it an easy job. Would it be a nissan only part?

Which is good for decent - high powered Zeds? And how much lol

Found a good place for tyres, KP tyres in epsom/ewell, was looking around and they quoted a couple of quid more than the internet price!!!!!

Any chance anyone on here works for Jaguar??? I need to find out what size discs the XJR uses. The dimensions etc... Any help will be very much appreciated. Cheers, Isaac. :)

I know people say these are not that good, but when funds are tight and your about to have a bigger hp engine put in, they do become more of an attractive buy, the engine that is going in will be pushing over 450bhp, will these intercoolers be ok as I cant afford the top notch ones, the car will hardly ever be pushed hard, which one would you people go for? http://cgi.ebay.com/ebaymotors/CXRacing-FMIC-Intercooler-kit-Bolt-on-90-96-300zx-Z32_W0QQcmdZViewItemQQcategoryZ33742QQihZ011QQitemZ320267283816QQrdZ1QQsspagenameZWDVW http://cgi.ebay.com/ebaymotors/godspeed-90-96-300zx-z32-turbo-s-mount-intercooler-kit_W0QQcmdZViewItemQQcategoryZ33742QQihZ021QQit…

Ok posted earlier about tps which I have now adjusted and made no difference to the lumpy idle I have checked all sorts so going back to the maf sensor which I presume is the induction kit? if anyone can clarify that for me!? if it is, is this the connector I need to check marked in red circle? I know its spotless but im wondering if theres another one I should be checking?

I know this subject has been discussed very very recently, however i would just like a straight forward answer if possible please :D I've bought some Jaguar XJR Brembo calipers for my zed, however i have never ever looked into doing brakes before, so my question is - who do i ask to make me some brackets to fit the calipers to my zed? Also is there anyone i can ask about getting correct discs? What sizes etc..... Where from?...... Any help will be very much appreciated :) Cheers, Isaac.

I have got an AEM that will eventually be fitted to my Z. It is the one without the built in UEGO. I am just about to place an order for some parts and was wondering if these AEM parts are worthwhile getting? AEM Air intake Temp sensor with wire harness AEM 3.5 bar MAP or 50 PSIA Sensor Kit AEM Dual Channel UEGO Kit AEM Capacitive Digital Ignition MODULE - 4 or 8 Channel? I will be running 740CC injectors and a Doolz intake with JWT Pop Chargers. Also i have been told that the AEM has built in programmable traction control. I already have a racelogic system which was removed from my old Z and wondered what would be best to do, run the AEM t…

Just pulling into Nationwide HQ. Female driver and a mint looking car. :) Not seen it around before.

I have had these for about 5 years and when i removed them from my old car they are starting to look there age. A number of the fins on the front of them have crumbled away, will this affect there performance and is there anyway to recondition them? I will take some pictures later and post them up.

seen coming out of ingoldmells towards skeg sunday 22nd june. not sure what year but had vented headlight panel.

Hello! I posted about this yesterday but dident get much response so I shall explain it a bit better and hope someone can answer this for me??? my car has been running lumpy for ages now when cold and I go for a drive I have to keep blipping the throttle to get any speed as it seems to hold back alot but when warm it seems to be alot better but at 2000rpm I can feel a splutter every so often. I have just checked TPS with volt meter I have ignition on and put the prong on the center green wire and the reading is 11.82v and when I put it on full throttle I get 9.44v and it should be between 0.5 - 0.45v which it aint! it goes down on full throttle? I also get a humming noise…

Hi, Have been reading through my Blitz boost controller manual, and apparently I can connect it to a Blitz MAP Analyzer Now apparently the later VG30DETT has a MAP sensor as well as MAF, for the 16bit ECU (not the boost gauge as I don't have one). If so I could possibly install one of these puppies, which might be sexy time... But I cannot find one for sale anywhere, anyone seen them?? Cheers

Has anyone had a series 2 ptu go u/s?:(

I turned 25 yesterday and instead of getting lots of little presents from the family and gf, i got one big present from everyone. This was all becuase of my lovely girlfriend Paulina, who organised getting me this absolutely perfect birthday present and having running around getting everyone to chip in. Best birthday ive ever had Im going to see about changing my fourm nick now too. Does anyone know if i can change my username on here???

;)Hi all, I'm doing a meeting this coming week end and guess what.... I ****ing lose my Carbon fiber nose panel. I removed it last time I want on the track and I never find it since... I guess I forgot it at the track... Any idea or any help to get one quickly? I need one that can be ship tomorow. I don't want a stock one, I need a vented one. Thank you for the help

hi i can't seem to find there website etc any body have any details for them please:headvswal